2024 Jeep Compass IPC Speed Limiter Indication TSB

Owners of the 2024 Jeep Compass may notice an issue with their vehicle's instrument panel cluster (IPC) display. Specifically, when the vehicle's system is configured to imperial units, the speed limiter indication might be displayed incorrectly. This concern is detailed in Technical Service Bulletin (TSB) 08-414-25, issued by Stellantis.

This TSB, dated December 20, 2025, supersedes an earlier bulletin, TSB 08-342-25, which was issued on October 14, 2025. The update aims to resolve the display anomaly by providing the latest software for the IPC. The issue primarily affects 2024 Jeep Compass vehicles equipped with the 10.25-inch TFT Color Display, identified by Sales Code JAU. This bulletin is applicable to various markets including North America (NA), Middle East and Africa (MEA), South America (SA), India and Asia Pacific (IAP), Enlarged Europe (EE), and China (CH).

Symptoms

The primary symptom reported by customers is an "Incorrect speed limiter indication shown on the IPC when the system is set to imperial units." This means that the digital display on your instrument panel cluster might show an inaccurate value for the speed limiter setting, potentially leading to confusion or misinterpretation of your vehicle's current settings.

This specific display anomaly is attributed to a software glitch within the Instrument Panel Cluster itself. If you own a 2024 Jeep Compass and observe this particular issue, it indicates that your vehicle's IPC software requires an update. The 2024 Jeep Compass speed limiter indication problem is a software-based issue rather than a hardware malfunction.

Diagnosis and Trigger Conditions

To diagnose this condition, a technician will use a scan tool, such as wiTECH, to verify that all related systems are functioning correctly. If the customer's concern matches the "Incorrect speed limiter indication shown on the IPC when the system is set to imperial units" symptom described in TSB 08-414-25, the repair procedure outlined in the bulletin should be followed.

It's important for technicians to address any other diagnostic trouble codes (DTCs) or unrelated symptoms before proceeding with this specific bulletin. However, the incorrect speed limiter indication itself does not typically generate a specific DTC, as it is a display anomaly rather than a system fault that would trigger a code.

Repair Procedure Summary

The repair for the 2024 Jeep Compass speed limiter indication issue involves updating the Instrument Panel Cluster (IPC) software. This is a straightforward reprogramming process that requires specialized tools and careful execution.

First, a battery charger must be connected to the vehicle to maintain a stable voltage between 13.2 and 13.5 volts throughout the flashing process. This prevents potential issues that could arise from voltage fluctuations. The technician will then use the wiTECH Diagnostic Application to reprogram the IPC with the latest available software. If the flash process is interrupted for any reason, it must be restarted to ensure a complete and successful update. After the reprogramming is complete, the wiTECH application will automatically identify and allow the technician to clear any DTCs that may have been set in other modules during the reprogramming process.

Required Tools or Parts

The primary tool required for this service is the wiTECH or Equivalent diagnostic system. This specialized software and hardware interface allows technicians to communicate with the vehicle's control modules, including the Instrument Panel Cluster, to perform software updates and diagnostics. No specific replacement parts are required, as the repair is purely software-based.

Important Warnings

When performing the IPC software update, technicians must observe critical precautions to ensure the process is successful and does not damage vehicle electronics. It is essential to install a battery charger to maintain the battery voltage above 13.2 volts and prevent it from exceeding 13.5 volts during the flash procedure. Failure to do so could lead to an incomplete or corrupted software update. If the flash process is interrupted or aborted for any reason, it must be immediately restarted to avoid potential issues with the IPC.

Owner Action

If you own a 2024 Jeep Compass and have observed the "Incorrect speed limiter indication shown on the IPC when the system is set to imperial units" symptom, you should schedule an appointment with your authorized Jeep dealership. Inform them about the specific issue and mention Technical Service Bulletin (TSB) 08-414-25.

The repair involves a software update to the Instrument Panel Cluster (IPC) and is expected to take approximately 0.5 hours of labor time. This type of repair is typically covered under the vehicle's warranty. The dealer will use failure code "CC" (Customer Concern) when processing the claim.

NHTSA ID: 11026792