2023-2025 Jeep Compass Plant Mode Activated TSB

Owners of certain 2023-2025 Jeep Compass, Commander, Renegade, and 2024 RAM Rampage vehicles may encounter a condition where the vehicle displays a "Plant Mode Activated" message, accompanied by various warning lights and drivability concerns. This issue is addressed by Technical Service Bulletin (TSB) 08-068-25, which supersedes TSB 08-176-24.

This TSB, also released as Rapid Service Update (RSU) 24-111, provides diagnostic and repair procedures for vehicles exhibiting these symptoms. The core problem lies with the Anti-Lock Brake System (ABS) module, which requires replacement.

Symptoms of 'Plant Mode Activated'

Customers will typically observe a Malfunction Indicator Lamp (MIL) illumination on the dashboard. In addition to the MIL, the vehicle may exhibit one or more specific Diagnostic Trouble Codes (DTCs). Beyond these codes, drivers might experience noticeable changes in vehicle behavior.

Common symptoms associated with the "Plant Mode Activated" condition include:

• The vehicle does not accelerate properly.
• The "Anti-Lock Brakes System (ABS) warning light on" is displayed.

These symptoms are specifically applicable to vehicles operating in Plant Mode.

Fault Codes / DTCs

The "Plant Mode Activated" issue is often accompanied by specific Diagnostic Trouble Codes (DTCs) that help technicians pinpoint the problem. If your vehicle is experiencing the symptoms described, a scan tool may reveal one or more of the following codes:

Code	Description
C170C-00	PBC (Event PBC Factory Mode)
C1436-86	Electric Parking Brake System Fail
C10D0	Electronic Park Brake System Failure

Diagnosis and Trigger Conditions

Diagnosis for the "Plant Mode Activated" condition begins by confirming if the vehicle is indeed in Plant Mode. This TSB 08-068-25 specifically applies to vehicles that are in this operational state. If the vehicle is not in Plant Mode, normal diagnostic procedures should be followed as this bulletin would not apply.

It's important to note that this Rapid Service Update (RSU) 24-111 is only applicable to vehicles identified on the specific RSU VIN list. Technicians can verify eligibility using VIP or by performing a VIN search in DealerCONNECT/Service Library.

Repair Procedure Summary

The repair for the "Plant Mode Activated" issue, as detailed in TSB 08-068-25, primarily involves the replacement of the ABS module. The procedure is straightforward once the vehicle's eligibility and Plant Mode status are confirmed.

1. Confirm Plant Mode: The first step is to verify if the vehicle is currently in Plant Mode. If it is, the repair proceeds. If not, the bulletin does not apply, and standard diagnostic steps are necessary.
2. Replace ABS Module: The BSM (ABS) Module is replaced. Technicians are directed to consult the detailed service procedures available in DealerCONNECT under Service Info, specifically section 3340A12, which covers the removal, replacement, and bleeding of the ABS hydraulic and electronic circuit.
3. Clear DTCs: After the ABS module replacement, any Diagnostic Trouble Codes (DTCs) that may have been set are cleared from the vehicle's system.

Required Tools and Parts

To perform the repair outlined in TSB 08-068-25, specific tools and parts are necessary:

Special Tools

• wiTECH or Equivalent: A diagnostic tool required for checking Plant Mode status and clearing DTCs.

Required Parts

Replacing the ABS module involves several specific part numbers for the BSM (ABS) Module, depending on the vehicle model and configuration. Additionally, brake fluid is required for the procedure.

• BSM (ABS) Module:
  • 68721636AA (NA) / 7096764 (EMEA) - For Renegade with TPMS 2.
  • 68721644AA (NA) / 7096759 (EMEA) - For Compass MY23, MY24, MY25 PL8.
  • 68721648AA (NA) / 7096760 (EMEA) - For Commander MY23, MY24 with ACC.
  • 68721643AA (NA) / 7096761 (EMEA) - For Commander MY25 with ACC.
  • 68721635AA (NA) / 7096762 (EMEA) - For Commander without ACC.
  • 68721637AA (NA) / 7096765 (EMEA) - For Compass MY23, MY24, MY25 (not PL8).
  • 68721641AA (NA) / 7096766 (EMEA) - For Rampage.
• Break Fluid (500ML): Part number 68417931AA (NA) / 68417931AA (EMEA).

Important Warnings

Owners should be aware of specific conditions regarding this service action:

• VIN List Restriction: "This RSU only applies to vehicles on the RSU VIN list." It is crucial to confirm your vehicle's eligibility through a dealership or by checking the RSU VIN list.
• Normal Diagnosis: If your vehicle is not in Plant Mode, this bulletin does not apply, and standard diagnostic procedures are required to address any issues.

Owner Action

If your 2023-2025 Jeep Compass, Commander, Renegade, or 2024 RAM Rampage is displaying the "Plant Mode Activated" message, a Malfunction Indicator Lamp, or any of the associated symptoms like improper acceleration or an "Anti-Lock Brakes System (ABS) warning light on," you should contact your authorized dealership. Provide them with the symptoms you are experiencing and mention Technical Service Bulletin (TSB) 08-068-25 or Rapid Service Update (RSU) 24-111.

All applicable repairs under this bulletin are reimbursable within the provisions of your vehicle's warranty. The labor time for this repair is approximately 1.4 hours.

---

Source: NHTSA ID: 11015872