Boletín de servicio

2022-2025 Jeep Compass/Renegade Manual Seat Snap Noise

Experiencing a snap noise from your manual front seat in a 2022-2025 Jeep Compass or Renegade? Manufacturer Communication S2423000042 describes a repair procedure to resolve this issue by correctly tightening the seat track fasteners. This TSB addresses seats that make noise or have guides that…

Byeditor sarah mitchell2022 Jeep Compass
2022 Jeep Compass — Jeep Compass seat snap noise
Editorial illustration generated for this article.
S2423000042Snap Noise From Manual Front Seat While Adjusting Or Moving Seat Trackseat guides do not simultaneously engagemanual seat snap noiseJeep Compass seat snap noiseJeep Renegade seat snap noisefront seat snap noise26 Ft. Lbs.35 Nm23-Body; Seats, First Row
Jeep Compass
2023–2025
Jeep Renegade
2022–2024

Symptoms

Owners of 2022-2025 Jeep Compass and Renegade vehicles may notice a distinct "Snap Noise From Manual Front Seat While Adjusting Or Moving Seat Track". This noise can occur when moving the seat forward or backward. Another related symptom is when the seat guides do not simultaneously engage, leading to uneven movement or a feeling of looseness. This condition can affect either or both of the front manual seats.

Diagnosis / Trigger Conditions

If you are experiencing a "Snap Noise From Manual Front Seat While Adjusting Or Moving Seat Track" in your vehicle, a technician will typically attempt to duplicate the noise by adjusting the seat track. The issue is confirmed if the snap noise is reproduced during this adjustment process.

Repair Procedure Summary

Manufacturer Communication S2423000042 details a specific procedure to resolve the manual front seat snap noise. The repair involves carefully adjusting and tightening the seat fasteners to ensure proper engagement and eliminate the noise. Here's a summary of the steps:

  1. The four seat fasteners that secure the seat to the floor are loosened, but not fully removed.
  2. The seat track is moved to its full forward position, ensuring that the seat guides are completely engaged.
  3. The rear floor bolt on the tunnel side is tightened to 26 Ft. Lbs. (35 Nm).
  4. The rear outboard seat bolt is tightened to 26 Ft. Lbs. (35 Nm).
  5. The seat is then adjusted to its full rearward position.
  6. The forward tunnel side seat fastener is tightened to 26 Ft. Lbs. (35 Nm).
  7. Finally, the forward outboard seat fastener is tightened to 26 Ft. Lbs. (35 Nm).

After these steps, the technician will verify that the snap noise is no longer present when adjusting the seat fore/aft.

Important Warnings

It is crucial for owners to note that Manufacturer Communication S2423000042 explicitly states: "This document does not authorize warranty repairs." This means that any costs associated with this repair may not be covered under your vehicle's warranty, and you should discuss this with your dealership prior to service.

Owner Action

If your 2022-2025 Jeep Compass or Renegade is exhibiting a "Snap Noise From Manual Front Seat While Adjusting Or Moving Seat Track", it is recommended to schedule an appointment with your authorized Jeep dealership. Inform them about the specific noise and mention Manufacturer Communication S2423000042. While this document does not authorize warranty repairs, discussing the issue with your dealer will allow them to diagnose the problem and perform the necessary adjustments as outlined in the service bulletin. For additional information, technicians may refer to Service Library group 23-Body; Seats, First Row.


Source: NHTSA ID: 11007970

Frequently Asked Questions

What is the issue with the manual front seats in my 2022-2025 Jeep Compass or Renegade?
Owners of 2022-2025 Jeep Compass and Renegade vehicles may experience a "Snap Noise From Manual Front Seat While Adjusting Or Moving Seat Track". This can also manifest as seat guides not engaging simultaneously, causing uneven movement or a loose feeling.
How does Manufacturer Communication S2423000042 address the Jeep Compass seat snap noise?
Manufacturer Communication S2423000042 provides a repair procedure that involves loosening the seat fasteners, moving the seat to ensure guides are fully engaged, and then retightening all four seat fasteners to a specific torque of 26 Ft. Lbs. (35 Nm).
Is the repair for the manual seat snap noise covered under warranty?
The manufacturer communication, S2423000042, explicitly states, "This document does not authorize warranty repairs." This means that the repair may not be covered under your vehicle's warranty, and you should discuss potential costs with your dealership.
Which Jeep models are affected by this seat noise issue?
This issue, described in Manufacturer Communication S2423000042, affects 2022-2025 Jeep Compass models and 2022-2024 Jeep Renegade models.

Related Articles

2022 Jeep Compass Health Check: TSBs and Common Issues

For the 2022 Jeep Compass, there are no recalls or federal investigations. However, numerous manufacturer service bulletins address issues like Adaptive Cruise Control malfunctions, fuel injector leaks, and various electrical and software-related problems.

2022 Jeep Compass ACC Module Update TSB 08-159-26

This technical service bulletin (TSB 08-159-26) addresses issues in the 2022 Jeep Compass equipped with Adaptive Cruise Control, including a Malfunction Indicator Lamp (MIL) and the message "ACC/FCW Unavailable, Service Required", caused by ACC module software.

2022 Jeep Compass ACC/FCW Unavailable TSB 08-157-26

Learn about Technical Service Bulletin 08-157-26 for the 2022 Jeep Compass, addressing "ACC/FCW Unavailable, Service Required" messages and DTC C14A4-00 due to Adaptive Cruise Control software issues.

2022-2026 Jeep Compass Fuel Injector Leak TSB

This Technical Service Bulletin (TSB) 14-003-26 addresses a fuel injector leak issue in 2022-2026 Jeep Compass vehicles equipped with the 1.3L I4 Turbo MAIR DI Engine (Sales Code EYJ). Symptoms include Malfunction Indicator Lamp (MIL) illumination, unstable idle, abnormal engine noise, and various…

2021-2026 Stellantis Speaker Part 05091019AB Check

Stellantis has initiated a Quality Inspection Request (NHTSA ID 11030026) for speaker part 05091019AB. Dealers are instructed to identify and return all suspect units of this part built before July 15, 2025, to prevent them from being installed in vehicles.

Comments

Be the first to comment.

Leave a comment

Comments are moderated and may take a moment to appear. Only your first name and the initial of your last name are shown publicly.

Verifying you are human...