2024 BMW Steering Shaft Universal Joint Delivery Stop SIB 32 02 25

BMW has released Service Information Bulletin (SIB) 32 02 25, a Delivery Stop, addressing a manufacturing defect in the steering shaft universal joint for certain 2024 BMW vehicles. This bulletin, which is Revision 2 and replaces SI B32 02 25 dated March 2025, highlights that the universal joint may not have been adequately greased during assembly.

This issue with the BMW steering shaft universal joint can result in noticeable symptoms for vehicle owners and requires a specific repair procedure.

Important Warnings for Dealers and Owners

BMW has issued critical instructions regarding vehicles affected by this Delivery Stop:

• "Do not deliver to a customer, a New, Certified Pre-Owned or Used vehicle subject to a Delivery Stop, until the vehicle is repaired."
• "Do not use or sell replacement equipment/parts subject to a Delivery Stop."

These warnings emphasize that affected vehicles must be repaired before they can be sold or delivered to customers.

Symptoms of the Steering Shaft Universal Joint Issue

Owners of affected 2024 BMW vehicles may experience the following symptoms related to the BMW steering shaft universal joint:

• Audible Squeaking and Cracking Noises: These sounds may originate from the steering system.
• Increased Steering Force Required: Drivers might notice that more effort is needed to turn the steering wheel.

Cause of the Problem

The root cause of this issue is a manufacturing error. Parts of the steering shaft universal joint were joined together without proper greasing. This lack of lubrication leads to the symptoms described above.

Repair Procedure Summary

To correct the issue with the BMW steering shaft universal joint, the universal joint must be replaced. The detailed repair steps are outlined in BMW's internal repair procedure, REP32 31 210, titled "Replacing the universal joint."

Required Parts

The following parts may be required for the repair, depending on the specific vehicle model and drivetrain:

• For G60 AWD, G70 AWD (ICE), G60/G70 RWD Battery Electric Vehicle (BEV):
  • Swivel joint: Part Number 32 30 5 B6C 2A5 (Quantity 1) or 32 30 5 B7B ED6 (Quantity 1)
  • Torx bolt: Part Number 32 30 6 778 609 (Quantity 2)
• For G70 AWD BEV:
  • Swivel joint: Part Number 32 30 5 B6C 2A8 (Quantity 1) or 32 30 5 B7B ED7 (Quantity 1)
  • Torx bolt: Part Number 32 30 6 778 609 (Quantity 2)

Additional materials such as fluids, lubricants, one-time use screws, nuts, and seals, are to be selected from the Electronic Parts Catalog or other approved BMW Group resources as per the vehicle type.

Claim Information

For dealers, reimbursement for this action is processed using Repair Code 0032680300, which is designated for "G60 G70 G90 Replace universal joint on steering shaft." Applicable labor operations include 00 78 532 for vehicles repaired before first delivery, and 00 78 029 for vehicles already in the workshop for other reasons.

Owner Action

If you own a 2024 BMW i5, 740i, 530i, or i7, and suspect your vehicle might be affected by the BMW steering shaft universal joint issue, you should contact your authorized BMW dealer. Vehicles requiring this campaign will show an "Open" status when checked in BMW's internal systems. The repair will be performed free of charge under the Delivery Stop campaign.

NHTSA ID: 11018513 ```