2022-2024 Audi A3, S3, RS3 Parking Aid DTC B107A16
Audi has issued Technical Service Bulletin 91 24 14 2069678/2 for 2022-2024 Audi A3, S3, and RS3 models addressing instances where the acoustic and optical parking aid is not working, accompanied by DTC B107A16. This bulletin clarifies that the issue is often transient and typically resolved by…
Ahmet Topcu2022 Audi S3
Also applies to
- Audi A3
- 2022–2024
- Audi RS 3
- 2022–2024
- Audi S3
- 2023–2024
Symptoms
Owners of affected 2022-2024 Audi A3, S3, and RS3 vehicles may notice that the acoustic and optical parking aid does not work. This condition indicates a problem with the vehicle's parking assistance system.
Fault Codes / DTCs
When the Audi S3 parking aid not working symptom occurs, the following Diagnostic Trouble Code (DTC) may be stored in the driver assist systems control unit (-J1121-):
| Code | Description | Symptom Number |
|---|---|---|
| B107A16 | Voltage supply for parking aid sensor, voltage too low | 233474 |
Important Warnings
Audi Technical Service Bulletin 91 24 14 2069678/2 highlights crucial information for both technicians and owners:
- Parts replacement does not solve this issue. Attempting to replace parts will not resolve the underlying problem, and any claims for replaced parts will be subject to review by Audi.
- If your vehicle is outside of its warranty period, this Technical Service Bulletin is for informational purposes only, meaning any diagnostic or repair costs would be your responsibility.
Diagnosis / Trigger Conditions
Audi states that the behavior described, where the parking aid temporarily stops working and DTC B107A16 is stored, is considered normal. In some rare instances, the problem may reoccur a second time. No further service measures or extensive diagnostics are typically required beyond checking for the specific DTC.
Repair Procedure Summary
The recommended repair for the Audi S3 parking aid not working issue, as outlined in TSB 91 24 14 2069678/2, is straightforward. Technicians should simply erase the Diagnostic Trouble Code B107A16, which is associated with a low voltage supply to the parking aid sensor. This action is generally sufficient to resolve the symptom.
Warranty Information
This Technical Service Bulletin (TSB) provides specific warranty claim details for qualifying repairs:
- Claim Type: 110 for vehicles under 48 months or 50,000 miles, or G10 for CPO (Certified Pre-Owned) covered vehicles, requiring owner verification.
- Service Number: 9093
- Damage Code: 0039
- Diagnostic Time: GFF (0150 0060) for time stated on the diagnostic protocol (maximum 25 TU), or GFF (0150 0010) for operations detailed in the Service Repair Time (SRT) guide.
All warranty claims must adhere to the Audi Warranty Policies and Procedures Manual and are subject to review.
Source: NHTSA ID: 11002167
Frequently Asked Questions
- What does DTC B107A16 mean for my Audi?
- DTC B107A16 indicates a 'Voltage supply for parking aid sensor, voltage too low' condition. This code is often stored in the driver assist systems control unit (-J1121-) when your Audi's parking aid is not working.
- My Audi's parking aid is not working. Do I need new parts?
- No, according to Audi Technical Service Bulletin 91 24 14 2069678/2, replacing parts will not resolve the 'Parking aid not working' issue associated with DTC B107A16. The problem is typically a transient condition.
- How is the 'Audi S3 parking aid not working' issue fixed?
- The recommended fix for the 'Audi S3 parking aid not working' issue with DTC B107A16 is to simply erase the fault code from the driver assist systems control unit. This action usually resolves the problem.
- Which Audi models are affected by the parking aid issue with DTC B107A16?
- This issue primarily affects 2022-2024 Audi A3, S3, and RS3 models. While the original TSB lists more models, these are the specific vehicles linked by NHTSA to this document.
Other revisions of this TSB
Related Articles
2022-2023 Audi MIB3 MMI Software Update for Emergency Call Fault
Audi has issued Technical Service Bulletin (TSB) 2079134/4 for 2022-2023 A3, S3, RS 3, e-tron GT, and RS e-tron GT vehicles equipped with MIB3 infotainment systems. This TSB addresses various MMI function problems and the 'Emergency call fault' message by providing a critical software update.
2021-2024 Audi A3/S3/TT Whining Noises TSB 2074764/2
Audi Technical Service Bulletin 2074764/2 describes whining noises from the rear end of 2021-2024 Audi A3, S3, and TT models during acceleration or deceleration. This TSB clarifies that these noises are comfort-related and replacing parts will not resolve the issue.
2022-2025 Audi MIB3 Volume Control Not Working TSB U11B900
Audi has released Technical Service Bulletin 2072873/6 to address issues with the MIB3 infotainment system's volume control and skip buttons not working in 2022-2025 A3, S3, RS 3, e-tron GT, and RS e-tron GT models. The problem is linked to DTC U11B900, indicating a software issue requiring an…
2022-2023 Audi MIB3 Conbox Software Update
Audi has released a software update for the conbox component within the MIB3 infotainment system. This update, detailed in manufacturer communication NHTSA ID 11027377, applies to various 2022-2023 Audi A3, S3, RS 3, e-tron GT, and RS e-tron GT models.
2022-2024 Audi A3/S3/RS3 Exterior Lighting Warning TSB 2074786/3
Audi Technical Service Bulletin 2074786/3 details a 'Warning lamp for exterior lighting' issue in 2022-2024 A3, S3, RS3, and Q4 e-tron vehicles. This TSB addresses DTCs U112100, U110B00, and B126A29, often resolved by light switch replacement.
Leave a comment
Comments are moderated and may take a moment to appear. Only your first name and the initial of your last name are shown publicly.
Comments
Be the first to comment.