Service Bulletin

2022-2026 Audi e-tron GT ABS/ESC Warning Lamp DTCs

Audi Technical Service Bulletin 2064758/4 addresses specific diagnostic trouble codes (DTCs) B2F0100, U012700, U112200, and U112300 that may appear in the ABS control module of 2022-2026 Audi e-tron GT vehicles. These codes are considered normal communication logs and do not indicate a fault or…

ByAhmet Topcu — Founder & Editor-in-Chief2026 Audi S e-tron GT
2026 Audi S e-tron GT — Audi e-tron GT ABS DTCs
Editorial illustration generated for this article.
DTC B2F0100DTC U012700DTC U112200DTC U112300Audi TSB 2064758/4Audi TSB 22-28ABS control module J104Audi e-tron GT ABS/ESC warning lampTire Pressure Monitoring Control Module - no CommunicationData bus implausible message
Audi e-tron GT
2022–2025
Audi RS e-tron GT
2022–2024

Important Information for Owners

Audi has released Technical Service Bulletin (TSB) 2064758/4 to address specific diagnostic trouble codes (DTCs) that may be found in the ABS control module (J104) of 2022-2026 Audi e-tron GT and RS e-tron GT vehicles. This bulletin clarifies that while these codes may appear during diagnostic scans, they are a result of normal control module communication and do not indicate a fault or require any repair. The function of the ABS/ESC system is not affected or restricted by the presence of these DTCs.

This TSB, identified as 2064758/4, supersedes previous bulletin Group 45 number 22-28 dated November 2, 2022. It is purely informational and is not applicable to any Audi Warranty claims, as no service action is necessary.

Symptoms

Owners of affected 2022-2026 Audi e-tron GT vehicles typically will not experience any noticeable symptoms or customer concerns related to these codes. The diagnostic trouble codes (DTCs) are usually discovered during a Pre-Delivery Inspection (PDI) or other diagnostic work performed by a technician. In some cases, the ABS/ESC warning lamp may flash in the instrument cluster when a diagnostic tester is connected to the vehicle.

Fault Codes / DTCs

During diagnostic inspections, the following DTCs may be found stored in the ABS control module, J104 (address word 0003):

Code Description Symptom Code(s)
B2F0100 Development code 1 358656 (static), 339457 (intermittent)
U012700 Tire Pressure Monitoring Control Module - no Communication 358656 (static)
U112200 Data bus implausible message 303616 (static)
U112300 Data bus error value received 169984 (intermittent), 303360 (static)

Diagnosis / Trigger Conditions

These diagnostic trouble codes (DTCs) are typically identified during routine diagnostic scans, such as those performed during a Pre-Delivery Inspection (PDI) or other workshop diagnostic procedures. The TSB specifies that the ABS/ESC warning lamp might flash in the instrument cluster specifically when a diagnostic tester is connected. The presence of these codes, including the Audi e-tron GT ABS DTCs, is considered normal behavior for the control module's communication system.

What Owners Should Know

It is crucial for owners to understand that the presence of DTCs B2F0100, U012700, U112200, and U112300 in their 2022-2026 Audi e-tron GT does not signify a problem with their vehicle. Audi has explicitly stated that these codes are logged for design reasons related to control module communication and do not cause any issues for the customer. The functionality of the ABS/ESC system remains completely unaltered and unrestricted. Therefore, no repair or service measure is necessary to address these specific Audi e-tron GT ABS DTCs.

Furthermore, the TSB notes that while intermittent DTCs can be erased, they will reappear as soon as the conditions that trigger them occur again. Static DTCs, by their nature, cannot be erased. This reinforces that these codes are an inherent part of the vehicle's system operation and not an indication of a defect.

Manufacturer's Stance

Audi's Technical Service Bulletin 2064758/4 serves as an informational document for technicians. It clarifies that these specific DTCs are expected and do not warrant any action or repair. This means that if these codes are found during a diagnostic check, no parts replacement, software update, or other service procedure is required. This TSB is not associated with any warranty claims, as it addresses a non-issue.

NHTSA ID: 11009349

Frequently Asked Questions

What are DTCs B2F0100, U012700, U112200, and U112300 in my Audi e-tron GT?
These are diagnostic trouble codes that may be stored in the ABS control module (J104) of your 2022-2026 Audi e-tron GT. According to Audi TSB 2064758/4, they are related to normal control module communication and do not indicate a fault.
Do these Audi e-tron GT ABS DTCs require repair?
No, Audi states that these DTCs are logged for design reasons and do not cause any issues for the customer or affect the function of the ABS/ESC system. Therefore, no repair or service measure is necessary.
Will the ABS/ESC warning lamp illuminate due to these codes?
The ABS/ESC warning lamp may flash in the instrument cluster, but typically only when a diagnostic tester is connected to the vehicle. It does not indicate a malfunction that requires attention.
What should I do if a technician finds these codes in my 2022-2026 Audi e-tron GT?
You should be aware that these codes are considered normal and do not require any action. There is no need for parts replacement or service, as confirmed by Audi Technical Service Bulletin 2064758/4.

Other revisions of this TSB

Related Articles

2022-2026 Audi e-tron GT 12V Battery Discharged TSB 2075846/3

Audi Technical Service Bulletin 2075846/3 addresses a discharged 12V battery condition in 2022-2026 e-tron GT and RS e-tron GT vehicles, often accompanied by DTC P1D6C00. This TSB outlines a software update procedure to resolve the issue.

2025-2026 Audi e-tron GT Active Suspension Noise TSB

Audi has released Technical Service Bulletin 2080798/1 for 2025-2026 e-tron GT and RS e-tron GT models equipped with active suspension (PR code 1P8). It addresses noises heard when driving over bumps and outlines diagnostic procedures for technicians.

2026 Audi e-tron GT Roll Stabilization Configuration Aborted TSB

Audi Technical Service Bulletin 2080608/1 addresses an issue where roll stabilization configuration for diagnostic addresses 00D4 and 00D5 is aborted on 2026 Audi e-tron GT and RS e-tron GT vehicles. This TSB provides diagnostic steps for technicians.

2021-2026 Audi Ceramic Brake Repair Advisory

Audi has released a manufacturer communication, NHTSA ID 11027374, regarding ceramic brake repairs on various 2021-2026 Audi models. Technicians are required to contact the Technical Assistance Center (TAC) before proceeding with any brake service on vehicles equipped with ceramic brakes.

2022-2026 Audi e-tron GT C1399F0 Brake-In Mode TSB

Audi Technical Service Bulletin (TSB) 2063679/6 addresses Diagnostic Trouble Code (DTC) C1399F0 in 2022-2026 Audi e-tron GT, RS e-tron GT, and S e-tron GT models. This code indicates the vehicle is in a normal brake application mode for new or replaced brake components and typically requires no…

Comments

Be the first to comment.

Leave a comment

Comments are moderated and may take a moment to appear. Only your first name and the initial of your last name are shown publicly.

Verifying you are human...