2021 Audi e-tron Pre-Delivery Inspection Checklist

When you purchase a new 2021 Audi e-tron, it undergoes a crucial final check called the Pre-Delivery Inspection (PDI). This detailed process, outlined in Audi Service Bulletin TSB 2051720, is designed to ensure that every aspect of your vehicle is in perfect working order and meets Audi's stringent quality standards before it's handed over to you.

The 2021 Audi e-tron pre-delivery inspection covers everything from basic fluid levels to advanced driver assistance systems, guaranteeing a seamless and premium ownership experience from day one. It's a vital step to confirm all factory settings are correct and that the vehicle is free of any transit damage or operational issues.

Key Reminders for Technicians

Audi emphasizes several critical reminders for technicians performing the 2021 Audi e-tron pre-delivery inspection:

• All inspection items must be completed by a certified Audi technician prior to customer delivery.
• An Audi-approved battery charger should be used to replenish the high voltage battery during the inspection.
• Guided Fault Finding (GFF) must be utilized, and the session completed and sent to GFF Paperless.
• The Total PDI Test must be finished before any other scan tool work.
• Guided Fault Finding should be started in Drive Readiness mode to identify control modules in transport mode.
• Any high voltage charger must be removed before using ODIS, and the 12V battery maintained as usual.

Initial Vehicle Preparation

The PDI begins with fundamental vehicle preparation steps. Technicians check Elsa for any open campaigns or updates that need to be performed. They also verify the Audi phone box customer registration form is present and add the serial number from Elsa if the vehicle is equipped. Any required diagnostic work is completed, and the front license plate carrier is installed if necessary.

Exterior and Underhood Inspections

During the exterior inspection, technicians check all key buttons and features, ensure all doors close properly, and meticulously inspect the vehicle for any damage, dings, dents, or surface scratches, reporting and repairing any issues before delivery. For lighting and windshield, exterior lighting functions are tested, and windshield washers (including headlight washers) are checked and adjusted for proper aim.

Under the hood, protective packing is removed, and charging components are inspected. All fluid levels are checked and topped off as needed, and the windshield washer fluid reservoir is filled.

Interior and Trunk Functionality

Inside the vehicle, technicians verify the operation of windows, locks, and seat controls. The front passenger seat belt retainer is moved to its highest position, and all mirrors (side and rear-view) are inspected. All interior lights are checked, along with the heated steering wheel, heated/ventilated and massaging seats, manual folding 2nd row, and climate control. All power outlets, the panoramic sunroof, sunshade, and rear side sunshade operation are verified. The front Passenger Occupant Detection System is also checked for proper function.

In the trunk, technicians ensure the trunk operates correctly and the emergency release handle functions. The wheel bolt cover removal tool from the PDI kit is installed into the trunk tool kit.

Infotainment and Connectivity Setup

The MMI® touch screens (upper and lower) are verified for operation. Technicians set the time source to "GPS" and enable "Auto daylight savings time." Language and measurement units are set, and the Speech Dialog System is confirmed to be operating. The "Music volume while parking" is set to medium, and the dealership location is set in the navigation system. Any manual speed warning is turned off, and climate control is disabled via door unlock.

For media and radio, auxiliary inputs, CD/DVD player, and SD card slots are tested. Presets are programmed to local stations, and HD Radio is confirmed to be turned "off." For Audi connect® (USA ONLY) features, the Wi-Fi® hotspot is turned on, and satellite map view is enabled for navigation.

On-Hoist and Driving Performance Checks

With the vehicle on a hoist, the underside is inspected for fluid leaks and loose components. Steering, boots, brake system, hoses, tires, and wheels are checked for damage, and wheel bolts are inspected for proper torque. Wheel locks, covers, and center caps are installed, and tire pressures are set and stored for either the sold vehicle or stock inventory.

During a test drive, the horn operation is verified, and the electronic parking brake's hold and release functions are checked. Electric motor performance and acceleration, along with regen operation (including steering wheel paddles), are tested. Brakes are applied several times, and adaptive air suspension is checked in all positions. Steering/tire alignment is verified, and any squeaks, rattles, or wind noises are addressed before delivery. The rear-view mirror is calibrated, and radio reception quality for FM/SiriusXM® bands is checked.

Driver Assistance Systems Verification

All driver assistance systems undergo verification. This includes all cruise control functions, as well as cruise control/ACC (if equipped), which encompasses Adaptive Cruise Assist, Turn Assist, Intersection Assistant, Traffic Jam Assist, and Predictive Efficiency Assist. Active lane assist with emergency assistant and traffic sign recognition are checked. Audi side assist functionality and Pre sense® rear (if equipped) are verified. The parking system, Head-up display functionality, and High-beam assist are also confirmed to be operational. Finally, NAV is activated, and directions are followed back to the dealership.

Post-Road Test and Delivery Readiness

After the road test, technicians verify that the SOS button is green and the Roadside assistance button LED remains off. Fault memory is interrogated, and the diagnostic log is uploaded to GFF Paperless Server. The service interval is checked and verified, and the yellow tire pressure tag is installed on the steering wheel. A 30 Day Inventory Maintenance Sticker is applied, and a showroom trickle charger is installed to ensure the 12V battery remains charged at all times.

Critical Delivery Requirement

It is crucial that the vehicle is not delivered to the customer if the emergency call function has not been successfully activated. It may take up to 20 minutes for the emergency call system to activate (indicated by the LED turning green) after flight/transport mode deactivation. This ensures critical safety features are fully operational.

What Owners Should Know

The 2021 Audi e-tron pre-delivery inspection is a comprehensive process designed to ensure your new vehicle is in optimal condition. It covers a vast array of checks, from basic functionality to advanced technological systems, guaranteeing that your e-tron is safe, reliable, and ready for the road. This thorough inspection, guided by TSB 2051720, is Audi's commitment to delivering a high-quality vehicle.

NHTSA ID: 10177274