2021 Audi A7/S7/RS 7 Pre-Delivery Inspection Checklist

This document outlines the essential steps for the 2021 Audi A7 Pre-Delivery Inspection, a critical process performed by certified Audi technicians before a new vehicle is handed over to a customer. The PDI ensures that all vehicle systems are fully functional, safety features are active, and the vehicle meets Audi's stringent quality and performance standards. This detailed checklist covers everything from exterior aesthetics to advanced driver assistance systems and connectivity features.

Key Reminders for Technicians

The document emphasizes several crucial reminders for technicians. All PDI items must be completed by a certified Audi technician prior to customer delivery. Audi strongly recommends using an approved battery charger to prevent excessive battery discharge during the inspection process. Technicians are instructed to use Guided Fault Finding, ensuring the session is completed and sent to GFF Paperless. The "Total PDI Test" must be completed via the scan tool's special function tab. Furthermore, Guided Fault Finding should begin with the engine running to identify any control modules in transport mode. Items marked with an asterisk (*) require reference to the PDI Technician Reference Document on ServiceNet, while items marked with a double asterisk (**) require following instructions for stock inventory vehicles.

Vehicle Preparation and Exterior Checks

The initial phase of the 2021 Audi A7 Pre-Delivery Inspection involves thorough vehicle preparation and exterior checks. Technicians must verify the vehicle for any open campaigns and updates using the Elsa system. For equipped vehicles, the Audi phone box customer registration form needs verification, and its serial number must be added from Elsa, referencing TSB 2051720. Any necessary open campaigns or diagnostic work must be performed. If required, the front license plate carrier is installed.

Exterior checks include verifying the operation of all key buttons and features, along with proper power closing for all doors. A meticulous inspection of the exterior for any damage, dings, dents, or surface scratches is mandatory, with any identified issues to be reported and repaired before delivery to the customer. Lighting functions are tested, and windshield washers (including headlight washers if equipped) are checked for correct aim.

Interior and Infotainment System Checks

Inside the vehicle, the PDI covers extensive checks of the interior and infotainment systems. All seat belts and latches are verified for proper operation, as are window, lock, and seat controls. Mirrors, including the rear view mirror, are inspected for correct functionality. All interior lights are checked. For vehicles equipped with a heated steering wheel, its operation is verified; if not equipped, technicians are instructed to "ignore DTC B153813". Heated, ventilated, and massaging seats are also checked for proper operation, along along with manual folding second-row seats. Climate control, power outlets, sunroof, and sunshade operations are verified. The front Passenger Occupant Detection System is checked, as are any rear side manual or power sunshades.

The MMI® touch screens (upper and lower) are verified for operation. Settings such as the time source ("GPS") and automatic daylight savings ("on") are configured. Language and measurement units are set, and the Speech Dialog System is checked. The "Music volume while parking" setting is set to "medium," and the dealership location is set in navigation. Manual Speed Warning is turned off. For media and radio, all USB ports, auxiliary input, and CD/DVD player (if equipped) are checked. SD card slot functionality is tested, and local stations are programmed as presets. HD Radio is verified to be turned "off."

On-Hoist Inspection and Driving Performance

The on-hoist inspection is a critical part of the 2021 Audi A7 Pre-Delivery Inspection, focusing on underbody components. Technicians must remove transport suspension blocks, following ELSA instructions, especially for vehicles with sport suspension (1BE). Locking elements on front axle suspension struts are also removed for 1BE sport suspension vehicles. The steering, boots, brake system, hoses, tires, and wheels are checked for damage. The underside of the vehicle is inspected for fluid leaks and loose components. Wheel locks, wheel bolt covers, and center caps are installed, and wheel bolts are inspected for proper torque. Tire pressures are set and stored for either sold or stock inventory vehicles.

Driving performance checks include verifying horn operation, electronic parking brake hold and release, and engine Start-Stop System functionality. Engine performance and acceleration are verified, along with transmission operation, including shift paddles. The vehicle undergoes a test drive with several brake applications, and adaptive air suspension is checked in all positions (if equipped). Rear spoiler functionality, steering/tire alignment, and any squeaks, rattles, or wind noises are addressed before customer delivery. The rear view mirror is calibrated, and the quality of AM/FM/SiriusXM® radio reception is verified.

Driver Assistance Systems Verification

A significant portion of the PDI is dedicated to verifying the proper function of the advanced driver assistance systems. All cruise control functions are checked. For equipped vehicles, the cruise control/ACC with Stop & Go functionality is verified, which includes: Adaptive Cruise Assist, Turn Assist, Intersection Assistant, Traffic Jam Assist, Predictive Efficiency Assist, Active lane assist with emergency assistant, and Traffic sign recognition. The Audi side assist functionality, including Pre sense® rear, is verified. Operation of the night vision camera, parking system, all vehicle Head-up display functionality, and High-beam assistant are also confirmed. Finally, navigation is activated, and directions are followed back to the dealership.

Post-Road Test and Connectivity Checks

Following the road test, the PDI concludes with several final checks. The SOS button must be green, and the Roadside assistance button LED must remain off. It's noted that the emergency call system may take up to 20 minutes to activate after flight/transport mode deactivation. The document explicitly states, "The vehicle must not be delivered to the customer if the emergency call function has not been successfully activated (LED lights up in green)." Technicians must interrogate the fault memory and upload the diagnostic log to the GFF Paperless Server. The service interval is checked and verified for correctness, and engine oil and all other fluid levels are checked and topped off if necessary. The yellow tire pressure tag is ensured to be on the steering wheel, a 30 Day Inventory Maintenance Sticker is applied, and a showroom charger is installed to keep the battery charged.

For Audi connect® (USA ONLY) equipped vehicles, the Wi-Fi® hotspot is turned on and its visibility checked. It's noted that "No data available at PDI due to dealer demo mode (if equipped)." Satellite map view for navigation is also enabled if equipped.

Important Warnings

Owners and technicians should be aware of a critical warning regarding vehicle delivery. The document states: "The vehicle must not be delivered to the customer if the emergency call function has not been successfully activated (LED lights up in green)." This ensures that a vital safety feature is fully operational before the vehicle leaves the dealership.

---

NHTSA Source Citation

This information is based on Audi Service Pre-Delivery Inspection (PDI) document, NHTSA ID 10177267.