Service Bulletin

2023 Audi RS3 Emissions Recall 37P3 Software Update Delay

Audi has announced a temporary closure for the 37P3 emissions recall code affecting 2023 Audi RS3 and other 'criteria GY' vehicles. An unforeseen software update issue is causing delays, meaning repair work cannot be performed immediately. Audi is actively working to resolve the problem.

Byeditor marcus weber2023 Audi A6
2023 Audi A6 — Audi RS3 37P3 recall
Editorial illustration generated for this article.
37P337P3_DLR NOTICE_20240507RS3 emissions recallAudi RS3 37P3 recallAudi emissions recall delayTCM Software issueELSA recall code closedAudi RS3 software update issuecriteria GY vehiclesNHTSA 11002290
Audi A4
2023
Audi A4 allroad
2023
Audi A5
2023
Audi A6 allroad
2023
Audi A7
2023
Audi Q5
2023
Show 1 more
Audi RS 3
2023

Important Update on Audi Emissions Recall 37P3

Audi has issued an important dealer communication regarding a temporary code closure for the 37P3 emissions recall. This affects 2023 Audi RS3 and other 'criteria GY' vehicles. The communication, dated May 07, 2024, informs dealers about a software issue that is currently preventing the completion of this recall. Owners searching for information on the 2023 Audi RS3 37P3 recall should be aware of this temporary situation.

What's Happening with the 37P3 Recall Code

Due to an unforeseen problem with a recent software update, the code for the 37P3 emissions recall will appear as 'closed' in ELSA, Audi's electronic service information system. This temporary status means that while the recall exists, the necessary software update to address it cannot be performed at this time. This measure is in place while Audi investigates and corrects the underlying software issue.

Why This Matters to Owners

For owners of affected vehicles, particularly the 2023 Audi RS3, this means that if you contact your dealer to schedule a repair appointment for the 37P3 emissions recall, the work cannot be done right away. Audi explicitly states that "while the work cannot be done right away, Audi is working diligently to make it available as soon as possible." This advisory is crucial as it prevents unnecessary dealer visits and manages owner expectations regarding the recall completion.

Scope of the Software Issue

It is important to note that this specific software issue causing the temporary code closure only impacts 2023 Audi RS3 and other 'criteria GY' vehicles. Audi has clarified that this problem does not affect any other vehicles that are part of the broader 37P3 emissions recall. Therefore, if your vehicle is part of the 37P3 recall but is not an RS3 or a 'criteria GY' model, this particular delay does not apply to your repair.

Audi's Commitment to Resolution

Audi is actively investigating the software issue and is committed to correcting it promptly. The manufacturer has assured dealers that they are working diligently to make the necessary repair available as soon as possible. Audi plans to send another communication to dealers once the issue has been fully resolved and the recall work can proceed.

Next Steps for Owners

If you own a 2023 Audi RS3 or another 'criteria GY' vehicle and are concerned about the 37P3 emissions recall, you may contact your Audi dealer for updates. However, be prepared for the possibility that the repair cannot be performed immediately due to this temporary software issue. It is advisable to stay informed about future communications from Audi or your dealership regarding the resolution of this matter.

Source: NHTSA ID 11002290

Frequently Asked Questions

What is the 37P3 emissions recall for 2023 Audi RS3 vehicles?
The 37P3 emissions recall addresses a specific issue related to emissions in certain Audi vehicles, including the 2023 Audi RS3. However, a software problem is currently delaying the completion of this recall.
Why is there a delay in performing the 37P3 emissions recall repairs for my Audi RS3?
Audi has identified an unforeseen issue with a software update that causes the 37P3 emissions recall code to show as 'closed' in their ELSA system. This temporary measure means that the necessary repair work cannot be performed immediately while Audi investigates and corrects the software problem.
Does this software issue affect other Audi models or recalls?
Audi has stated that this specific software issue, which is causing the temporary delay for the 37P3 emissions recall, only impacts 2023 Audi RS3 and other 'criteria GY' vehicles. It does not affect other vehicles that are part of the broader 37P3 emissions recall.
What should I do if my 2023 Audi RS3 is affected by the 37P3 recall?
If your 2023 Audi RS3 is affected by the 37P3 emissions recall, you can contact your Audi dealer for updates. However, be aware that due to the current software issue, the repair work cannot be done right away. Audi is working diligently to resolve the problem and will issue further communications.

Related Articles

2021-2023 Audi A6/A7 TPMS Warning Light DTC U012700

Audi has released Technical Service Bulletin 2065474/5 to address instances where a Tire Pressure Monitoring System (TPMS) warning light appears in the instrument cluster, or a "TPMS message" is displayed, accompanied by diagnostic trouble code U012700.

2021-2025 Audi DL382 Transmission Noises TSB 2074806/3

Audi has released Technical Service Bulletin (TSB) 2074806/3 to address various noises and vibrations originating from the DL382 transmission and engine in 2021-2025 A4, A5, A6, A7, and Q5 models. This TSB provides detailed diagnostic and repair procedures for technicians.

2022-2025 Audi Steering Lock for Active Steering Failed Warning

Audi has issued Manufacturer Communication 11018963 to address instances where the warning message "Steering lock for active steering failed" appears in various 2022-2025 Audi A4, A5, A6, A7, S, and RS models. This technical service bulletin provides critical information for diagnosing and…

2022-2024 Audi A4-A8 Steering Lock Failure TSB 2061904/6

Audi has issued Technical Service Bulletin 2061904/6 for 2022-2024 A4, A5, A6, A7, and A8 models. It addresses a 'Steering lock for active steering failed' warning, often accompanied by DTC C110DF0, indicating a hardware issue with the steering column lock magnet.

2019-2025 Audi Self-Leveling Suspension Leans to One Side

Audi has issued Technical Service Bulletin 43 25 02 2061907/3 to clarify updated tolerance specifications for self-leveling suspension systems in various 2019-2025 models. This bulletin addresses customer concerns where the vehicle leans to one side when parked on a level surface.

Comments

Be the first to comment.

Leave a comment

Comments are moderated and may take a moment to appear. Only your first name and the initial of your last name are shown publicly.

Verifying you are human...