Jeep Grand Wagoneer Service Bulletins
1,281 manufacturer communications on file.
- September 2, 2022•Document ID: 10225979Service Bulletin/Repair InstructionsELECTRONIC STABILITY CONTROL:AUTOMATIC (ASC); SUSPENSION; ELECTRICAL SYSTEM; ELECTRONIC STABILITY CONTROL (ESC):CONTROL MODULE
- Mfr Comm. #:
- S1902000008
- Date Added:
- November 7, 2022
- Manufacturer:
- JEEP
SummaryAir Suspension Compressor Module Assembly Replacement.
Associated Products (5)Associated Documents - September 1, 2022•Document ID: 10225974Service Bulletin/Repair InstructionsBACK OVER PREVENTION; ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL; UNKNOWN OR OTHER
- Mfr Comm. #:
- S2223000065
- Date Added:
- November 7, 2022
- Manufacturer:
- JEEP
SummaryBuzz, Rattle Noise From Upper Instrument Panel Near Speaker.
Associated Products (2)Associated Documents - September 1, 2022•Document ID: 10225973Service Bulletin/Repair InstructionsAIR BAGS; AIR BAGS:SRS MALFUNCTION WARNING LAMP/LIGHT
- Mfr Comm. #:
- S228A000023
- Date Added:
- November 7, 2022
- Manufacturer:
- RAM
SummaryErroneous Email Or Mobile App Message Notification For Airbag Light On
Associated Products (8)Associated Documents - August 27, 2022•Document ID: 10229578Service Bulletin/Repair InstructionsPARKING BRAKE; AIR BAGS
- Mfr Comm. #:
- 2303522
- Date Added:
- January 9, 2023
- Manufacturer:
- JEEP
SummaryFront Row Seat Back Panel Loose This bulletin involves inspecting the front row seat back panels. Check for loose upper and lower panels. If needed the panels will need to be removed and inspected for broken clips and replaced if needed. Check the seat back and upper screen bezel for large gaps and loose panels Verify the Rear Seat Entertainment (RSE) screen bezel installation by checking visually and running hand over the seam checking gap and flushness. Gap should not exceed 1.5mm. Verify with feeler gage if necessary. Cap (bezel) should be flush to back panel. With both thumbs positioned on cap (bezel), simultaneously push upwardsto verify engagement. Cap (bezel) should stay engaged Fig. 1.Upper Seat Back (Bezel) Verify the front seat back panel installation is correct. From the rear seat area place both hands near top of back panel and with fingers slightly engaged into back panel gently pull to verify back panelis correctly installed. There should be no movement in the back panel from this direction. To verify engagement of lower part of back panel, grab rear lower sides and gently pull at same time. Back panel should not show any signs of movement Fig. 2.Seat Back Inspection Were there any loose panels or large gaps found in the upper or lower panels? This inspection needs to be performed on both the driver's and passenger's front seat back. YES>>>Proceed to Step 1 of the Repair Procedure. NO>>>This bulletin has been completed. Use inspection LOP (23-20-34-96) to close the active RSU.
Associated Products (2)Associated Documents - August 27, 2022•Document ID: 10225430Service Bulletin/Repair InstructionsSEATS
- Mfr Comm. #:
- 2303522
- Date Added:
- October 31, 2022
- Manufacturer:
- JEEP
SummaryFront Row Seat Back Panel Loose This bulletin involves inspecting the front row seat back panels. Check for loose upper and lower panels. If needed the panels will need to be removed and inspected for broken clips and replaced if needed. Check the seat back and upper screen bezel for large gaps and loose panels Verify the Rear Seat Entertainment (RSE) screen bezel installation by checking visually and running hand over the seam checking gap and flushness. Gap should not exceed 1.5mm. Verify with feeler gage if necessary. Cap (bezel) should be flush to back panel. With both thumbs positioned on cap (bezel), simultaneously push upwardsto verify engagement. Cap (bezel) should stay engaged Fig. 1.Upper Seat Back (Bezel) Verify the front seat back panel installation is correct. From the rear seat area place both hands near top of back panel and with fingers slightly engaged into back panel gently pull to verify back panelis correctly installed. There should be no movement in the back panel from this direction. To verify engagement of lower part of back panel, grab rear lower sides and gently pull at same time. Back panel should not show any signs of movement Fig. 2.Seat Back Inspection Were there any loose panels or large gaps found in the upper or lower panels? This inspection needs to be performed on both the driver's and passenger's front seat back. YES>>>Proceed to Step 1 of the Repair Procedure. NO>>>This bulletin has been completed. Use inspection LOP (23-20-34-96) to close the active RSU.
Associated Products (2)Associated Documents - August 27, 2022•Document ID: 10225293Service Bulletin/Repair InstructionsUNKNOWN OR OTHER; SEATS; EQUIPMENT
- Mfr Comm. #:
- 2303522
- Date Added:
- October 31, 2022
- Manufacturer:
- JEEP
SummaryFront Row Seat Back Panel Loose This bulletin involves inspecting the front row seat back panels. Check for loose upper and lower panels. If needed the panels will need to be removed and inspected for broken clips and replaced if needed. Check the seat back and upper screen bezel for large gaps and loose panels Verify the Rear Seat Entertainment (RSE) screen bezel installation by checking visually and running hand over the seam checking gap and flushness. Gap should not exceed 1.5mm. Verify with feeler gage if necessary. Cap (bezel) should be flush to back panel. With both thumbs positioned on cap (bezel), simultaneously push upwardsto verify engagement. Cap (bezel) should stay engaged Fig. 1.Upper Seat Back (Bezel) Verify the front seat back panel installation is correct. From the rear seat area place both hands near top of back panel and with fingers slightly engaged into back panel gently pull to verify back panelis correctly installed. There should be no movement in the back panel from this direction. To verify engagement of lower part of back panel, grab rear lower sides and gently pull at same time. Back panel should not show any signs of movement Fig. 2.Seat Back Inspection Were there any loose panels or large gaps found in the upper or lower panels? This inspection needs to be performed on both the driver's and passenger's front seat back. YES>>>Proceed to Step 1 of the Repair Procedure. NO>>>This bulletin has been completed. Use inspection LOP (23-20-34-96) to close the active RSU.
Associated Products (2)Associated Documents - August 26, 2022•Document ID: 10229510Service Bulletin/Repair InstructionsELECTRONIC STABILITY CONTROL:AUTOMATIC (ASC); SUSPENSION
- Mfr Comm. #:
- S2202000009
- Date Added:
- January 9, 2023
- Manufacturer:
- JEEP
SummaryClunking Noise From Front Suspension Over Bumps, Rough Road, Or Chassis Roll.
Associated Products (2)Associated Documents - August 26, 2022•Document ID: 10225367Service Bulletin/Repair InstructionsSUSPENSION
- Mfr Comm. #:
- S2202000009
- Date Added:
- October 31, 2022
- Manufacturer:
- JEEP
SummaryClunking Noise From Front Suspension Over Bumps, Rough Road, Or Chassis Roll.
Associated Products (2)Associated Documents - August 26, 2022•Document ID: 10225230Service Bulletin/Repair InstructionsSUSPENSION
- Mfr Comm. #:
- S2202000009
- Date Added:
- October 31, 2022
- Manufacturer:
- JEEP
SummaryClunking Noise From Front Suspension Over Bumps, Rough Road, Or Chassis Roll.
Associated Products (2)Associated Documents - August 25, 2022•Document ID: 10229501Service Bulletin/Repair InstructionsPOWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM)
- Mfr Comm. #:
- S2225000003
- Date Added:
- January 9, 2023
- Manufacturer:
- JEEP
SummaryP0513-Invalid Skim Key setting in the PCM after programming a replacement ?generic? PCM
Associated Products (2)Associated Documents - August 25, 2022•Document ID: 10225358Service Bulletin/Repair InstructionsPOWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM)
- Mfr Comm. #:
- S2225000003
- Date Added:
- October 31, 2022
- Manufacturer:
- JEEP
SummaryP0513-Invalid Skim Key setting in the PCM after programming a replacement ?generic? PCM
Associated Products (2)Associated Documents - August 25, 2022•Document ID: 10225221Service Bulletin/Repair InstructionsPOWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM)
- Mfr Comm. #:
- S2225000003
- Date Added:
- October 31, 2022
- Manufacturer:
- JEEP
SummaryP0513-Invalid Skim Key setting in the PCM after programming a replacement ?generic? PCM
Associated Products (2)Associated Documents - August 24, 2022•Document ID: 10229575Service Bulletin/Repair InstructionsEXTERIOR LIGHTING; ELECTRICAL SYSTEM
- Mfr Comm. #:
- 0816322
- Date Added:
- January 9, 2023
- Manufacturer:
- JEEP
SummaryFlash: Memory Seat Module (MSM) Updates This bulletin involves reprogramming the MSM with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find the following Diagnostic Trouble Code (DTC). B1D9B-54 - Seat Horizontal Front Stop Not Learned-Missing Calibration. Customers may experience the following:Memory seat do not save on profiles 1 or 2. Easy entry/exit functionality is inoperative.
Associated Products (2)Associated Documents - August 24, 2022•Document ID: 10225427Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; SEATS
- Mfr Comm. #:
- 0816322
- Date Added:
- October 31, 2022
- Manufacturer:
- JEEP
SummaryFlash: Memory Seat Module (MSM) Updates This bulletin involves reprogramming the MSM with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find the following Diagnostic Trouble Code (DTC). B1D9B-54 - Seat Horizontal Front Stop Not Learned-Missing Calibration. Customers may experience the following:Memory seat do not save on profiles 1 or 2. Easy entry/exit functionality is inoperative.
Associated Products (2)Associated Documents - August 24, 2022•Document ID: 10225290Service Bulletin/Repair InstructionsEXTERIOR LIGHTING; SEATS; ELECTRICAL SYSTEM; ELECTRICAL SYSTEM:SOFTWARE
- Mfr Comm. #:
- 0816322
- Date Added:
- October 31, 2022
- Manufacturer:
- JEEP
SummaryFlash: Memory Seat Module (MSM) Updates This bulletin involves reprogramming the MSM with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find the following Diagnostic Trouble Code (DTC). B1D9B-54 - Seat Horizontal Front Stop Not Learned-Missing Calibration. Customers may experience the following:Memory seat do not save on profiles 1 or 2. Easy entry/exit functionality is inoperative.
Associated Products (2)Associated Documents - August 23, 2022•Document ID: 10229502Service Bulletin/Repair InstructionsSTRUCTURE:BODY:HOOD
- Mfr Comm. #:
- S2223000060
- Date Added:
- January 9, 2023
- Manufacturer:
- JEEP
SummaryHood Is Under Flush To The Fender
Associated Products (2)Associated Documents - August 23, 2022•Document ID: 10225359Service Bulletin/Repair InstructionsSTRUCTURE:BODY:HOOD
- Mfr Comm. #:
- S2223000060
- Date Added:
- October 31, 2022
- Manufacturer:
- JEEP
SummaryHood Is Under Flush To The Fender
Associated Products (1)Associated Documents - August 23, 2022•Document ID: 10225222Service Bulletin/Repair InstructionsSTRUCTURE:BODY:HOOD
- Mfr Comm. #:
- S2223000060
- Date Added:
- October 31, 2022
- Manufacturer:
- JEEP
SummaryHood Is Under Flush To The Fender
Associated Products (1)Associated Documents - August 19, 2022•Document ID: 10229572Service Bulletin/Repair InstructionsSTRUCTURE
- Mfr Comm. #:
- 3100122
- Date Added:
- January 9, 2023
- Manufacturer:
- JEEP
SummaryApproved Use of Weld Through Primers This bulletin documents the FCA US LLC position regarding the use of weld through primer when using Squeeze Type Resistance Spot Welding (STRSW) and Gas Metal Arc Welding (GMAW) processes when welding steel body panels and structural components.
Associated Products (40)2022 Alfa Romeo Stelvio2022 Chrysler 3002022 Chrysler Pacifica2022 Chrysler Voyager2022 Dodge Challenger2022 Dodge Charger2022 Dodge Durango2022 Dodge Journey2022 Jeep Cherokee2022 Jeep Compass2022 Jeep Gladiator2022 Jeep Grand Wagoneer2022 Jeep Renegade2022 Jeep Wagoneer2022 Jeep Wrangler2022 Ram 15002022 Ram 25002022 Ram 35002022 Ram 45002022 Ram 5500+ 20 moreAssociated Documents - August 19, 2022•Document ID: 10229571Service Bulletin/Repair InstructionsSTEERING
- Mfr Comm. #:
- 1900422
- Date Added:
- January 9, 2023
- Manufacturer:
- JEEP
SummarySteering Wheel Off-Center This bulletin involves re-centering the steering wheel. Customers may experience the steering wheel is off-center.
Associated Products (2)Associated Documents