Genesis GV80 Service Bulletins
115 manufacturer communications on file.
- April 20, 2023•Document ID: 10235562Service Bulletin/Repair InstructionsPOWER TRAIN
- Mfr Comm. #:
- 23-DS-001G-1
- Date Added:
- May 4, 2023
- Manufacturer:
- GENESIS
SummaryWhen servicing any of the specified vehicles below with the corresponding DTCs, follow the step-by-step procedures in this bulletin. ⢠Electronic-Limited Slip Differential (E-LSD) actuator on certain 2022 to 2023MY GV70 (JK1) and 2021 to 2023MY GV80 (JX1) for DTC codes P188213, P188900, or P189600. ⢠Transfer case actuator on certain 2022 to 2023MY GV70 (JK1) for DTC codes P196000, P195800, or P195513.
Associated Products (5)Associated Documents - April 10, 2023•Document ID: 10235347Service Bulletin/Repair InstructionsPOWER TRAIN
- Mfr Comm. #:
- 23-DS-001G
- Date Added:
- May 2, 2023
- Manufacturer:
- GENESIS
SummaryWhen servicing any of the specified vehicles below with the corresponding DTCs, follow the step-by-step procedures in this bulletin. ⢠Electronic-Limited Slip Differential (E-LSD) actuator on certain 2022 to 2023MY GV70 (JK1) and 2021 to 2023MY GV80 (JX1) for DTC codes P1882, P1889, or P1896. ⢠Transfer case actuator on certain 2022 to 2023MY GV70 (JK1) for DTC codes P1960, P1958, or P1955.
Associated Products (5)Associated Documents - April 7, 2023•Document ID: 10235342Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING:ENGINE:GASOLINE:TURBO/SUPERCHARGER
- Mfr Comm. #:
- 23-01-021G
- Date Added:
- May 2, 2023
- Manufacturer:
- GENESIS
SummaryOn certain 2022MY GV80 (JX1) vehicles, the turbo oil feed pipe mating surface on the engine may have been scratched during the manufacturing process. This scratch could cause an oil leak. This bulletin provides the procedure to polish the oil feed pipe mating surfaces and replace the gaskets.
Associated Products (2)Associated Documents - March 28, 2023•Document ID: 10233555Service Bulletin/Repair InstructionsSTRUCTURE:BODY:TAILGATE; LATCHES/LOCKS/LINKAGES
- Mfr Comm. #:
- 23-BE-004G
- Date Added:
- April 4, 2023
- Manufacturer:
- GENESIS
SummaryCertain 2021-2023MY GV80 (JX1) vehicles may exhibit a poorly closing power tailgate due to improper latching when closing which may cause the liftgate warning chime to come on. This bulletin provides the service procedure to update the Power Tailgate Module (PTGM) software to improve the condition stated above.
Associated Products (3)Associated Documents - March 20, 2023•Document ID: 10233543Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- 23-AT-001G
- Date Added:
- April 4, 2023
- Manufacturer:
- GENESIS
SummaryWhen servicing a vehicle with a âCheck Engine lightâ and any of the DTCs listed below, follow the Service Procedure to replace the related solenoid and E-module or park position switch.
Associated Products (20)2023 Genesis G702023 Genesis G802023 Genesis G902023 Genesis GV702023 Genesis GV802022 Genesis G702022 Genesis G802022 Genesis G902022 Genesis GV702022 Genesis GV802021 Genesis G702021 Genesis G802021 Genesis G902021 Genesis GV802020 Genesis G702020 Genesis G802020 Genesis G902019 Genesis G702019 Genesis G802019 Genesis G90Associated Documents - January 30, 2023•Document ID: 10230903Service Bulletin/Repair InstructionsVISIBILITY
- Mfr Comm. #:
- 23-BD-002G
- Date Added:
- February 2, 2023
- Manufacturer:
- GENESIS
SummaryThis bulletin provides information regarding condensation related to the accumulated moisture in the headlamp, rear combination lamp, daytime running lamp (DRL), or fog lamp. This TSB illustrates the various causes of condensation inside the lamp assembly.
Associated Products (26)2023 Genesis G702023 Genesis G802023 Genesis G902023 Genesis GV602023 Genesis GV702023 Genesis GV802022 Genesis G702022 Genesis G802022 Genesis G902022 Genesis GV702022 Genesis GV802021 Genesis G702021 Genesis G802021 Genesis G902021 Genesis GV802020 Genesis G702020 Genesis G802020 Genesis G902020 Genesis GV802019 Genesis G70+ 6 moreAssociated Documents - January 11, 2023•Document ID: 10230913Service Bulletin/Repair InstructionsPOWER TRAIN
- Mfr Comm. #:
- 23-01-003G
- Date Added:
- February 2, 2023
- Manufacturer:
- GENESIS
SummarySome of the applicable vehicles may experience torque converter internal rivet damage and cracks. Symptoms may include a scratching noise, and in rare cases, an engine stall at idle or at creep speeds. This bulletin describes the procedure to replace the torque converter.
Associated Products (4)Associated Documents - September 8, 2022•Document ID: 10222084Service Bulletin/Repair InstructionsPOWER TRAIN
- Mfr Comm. #:
- 22-01-071G
- Date Added:
- September 27, 2022
- Manufacturer:
- GENESIS
SummarySome of the applicable vehicles may experience torque converter internal rivet damage and cracks. Symptoms may include a scratching noise, and in rare cases, an engine stall at idle or at creep speeds. This bulletin describes the procedure to replace the torque converter.
Associated Products (4)Associated Documents - February 16, 2022•Document ID: 10253054Service Bulletin/Repair InstructionsFUEL SYSTEM, GASOLINE
- Mfr Comm. #:
- 22-FL-001G
- Date Added:
- April 11, 2024
- Manufacturer:
- GENESIS
SummaryThis bulletin provides information related to the ECM(Engine Control Module) software update for 3.5L GDI engine equipped vehicles that experience check engine light, no drivability issue, and with either of the following DTC found stored in the ECM: ⢠P2096 - Post Catalyst Fuel Trim - System Too Lean (Bank 1). ⢠P2098 - Post Catalyst Fuel Trim - System Too Lean (Bank 2).
Associated Products (5)Associated Documents - August 17, 2021•Document ID: 10253048Service Bulletin/Repair InstructionsPOWER TRAIN
- Mfr Comm. #:
- 21-AT-015G
- Date Added:
- April 11, 2024
- Manufacturer:
- GENESIS
SummaryThis TSB provides a procedure to diagnose and repair a transmission for the following Incorrect Ratio DTC (transmission clutch slipping more than 200 rpm in gear).
Associated Products (27)2025 Genesis GV702025 Genesis GV802024 Genesis G702024 Genesis G802024 Genesis G902024 Genesis GV702024 Genesis GV802023 Genesis G702023 Genesis G802023 Genesis G902023 Genesis GV702023 Genesis GV802022 Genesis G702022 Genesis G802022 Genesis G902022 Genesis GV702022 Genesis GV802021 Genesis G702021 Genesis G802021 Genesis G90+ 7 moreAssociated Documents - March 30, 2021•Document ID: 10190044Service Bulletin/Repair InstructionsEQUIPMENT; ENGINE AND ENGINE COOLING
- Mfr Comm. #:
- 21-EM-004H
- Date Added:
- April 7, 2021
- Manufacturer:
- GENESIS
SummaryThis bulletin provides the service procedure for engine connecting rod bearing clearance testing. Perform the procedure outlined in this bulletin to fulfill the Bearing Clearance Test inspection requirements to determine next required steps.
Associated Products (245)2021 Genesis G702021 Genesis G802021 Genesis GV802021 Hyundai Accent2021 Hyundai Elantra2021 Hyundai Kona2021 Hyundai Palisade2021 Hyundai Santa Fe2021 Hyundai Sonata2021 Hyundai Tucson2021 Hyundai Veloster2021 Hyundai Venue2020 Genesis G702020 Genesis G802020 Genesis G902020 Hyundai Accent2020 Hyundai Elantra2020 Hyundai Elantra GT2020 Hyundai Ioniq2020 Hyundai Kona+ 225 moreAssociated Documents - February 8, 2021•Document ID: 10253050Service Bulletin/Repair InstructionsSEATS
- Mfr Comm. #:
- 21-BD-004G
- Date Added:
- April 11, 2024
- Manufacturer:
- GENESIS
SummaryThe step height is the alignment between the 3rd row seat backs. If the step height is more than 5 mm, the seat backs may appear misaligned. If a vehicle exhibits misaligned 3rd row seat backs, follow the service procedure in this bulletin.
Associated Products (1)Associated Documents - February 3, 2021•Document ID: 10253049Service Bulletin/Repair InstructionsEQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
- Mfr Comm. #:
- 21-BD-001G
- Date Added:
- April 11, 2024
- Manufacturer:
- GENESIS
SummaryGenesis applies a Paint Protection Film (PPF) on new vehicles before delivery to dealerships. It provides a barrier between the paint and contaminants, such as rail dust, acid rain, and industrial fallout. In rare cases, the paint can become clouded under the PPF. These spots are the result of moisture trapped between the PPF and the paint.
Associated Products (35)2025 Genesis GV602025 Genesis GV702025 Genesis GV802024 Genesis G702024 Genesis G802024 Genesis G902024 Genesis GV602024 Genesis GV702024 Genesis GV802023 Genesis G702023 Genesis G802023 Genesis G902023 Genesis GV602023 Genesis GV702023 Genesis GV802022 Genesis G702022 Genesis G802022 Genesis G902022 Genesis GV702022 Genesis GV80+ 15 moreAssociated Documents - November 19, 2020•Document ID: 10183960Service Bulletin/Repair InstructionsWHEELS; TIRES
- Mfr Comm. #:
- 20-SS-004H
- Date Added:
- December 8, 2020
- Manufacturer:
- HYUNDAI
SummaryThis bulletin provides tire vibration service procedures, including how to optimize vehicle vibration performance. For all wheel/tire balance claims, the âTire Balance Data Sheetâ must be fully completed including imbalance and Road Force Variation (RFV) data. The Data Sheet can be found at the end of this bulletin.
Associated Products (266)2021 Hyundai Accent2021 Hyundai Elantra2021 Hyundai Kona2021 Hyundai Palisade2021 Hyundai Santa Fe2021 Hyundai Sonata2021 Hyundai Tucson2021 Hyundai Veloster2021 Hyundai Venue2020 Genesis G702020 Genesis G802020 Genesis G902020 Genesis GV802020 Hyundai Accent2020 Hyundai Elantra2020 Hyundai Elantra GT2020 Hyundai Ioniq2020 Hyundai Kona2020 Hyundai Nexo2020 Hyundai Palisade+ 246 moreAssociated Documents - July 27, 2020•Document ID: 10253038Service Bulletin/Repair InstructionsPOWER TRAIN; POWER TRAIN:AUTOMATIC TRANSMISSION
- Mfr Comm. #:
- 21-AT-012G
- Date Added:
- April 11, 2024
- Manufacturer:
- GENESIS
SummaryThis bulletin provides a procedure to transfer oil pressure data to the TCU using GDS Mobile. This procedure is necessary to reduce the TCU learning time and improve the shift quality. ï· Before replacing an automatic transmission (Pages 2~3): Input the data from the new transmission into the TCU using the GDS. ï· Before replacing a TCU (Pages 4~6): Back up the oil pressure data from the old TCU into the GDS and then transfer the data to the new TCM.
Associated Products (23)2025 Genesis GV702025 Genesis GV802024 Genesis G902024 Genesis GV702024 Genesis GV802023 Genesis G902023 Genesis GV702023 Genesis GV802022 Genesis G702022 Genesis G802022 Genesis G902022 Genesis GV702022 Genesis GV802021 Genesis G702021 Genesis G802021 Genesis G902021 Genesis GV802020 Genesis G702020 Genesis G802020 Genesis G90+ 3 moreAssociated Documents