Genesis G80 Service Bulletins (2027)
3 manufacturer communications on file.
- September 9, 2026•Document ID: 11037286Service Bulletin/Repair InstructionsPOWER TRAIN
- Mfr Comm. #:
- 26-DS-001G TSB
- Date Added:
- September 11, 2026
- Manufacturer:
- GENESIS
SummarySome GV70 (JK1, JK1A), GV80 (JX1) and G80 (RG3) vehicles may have a hum or whine noise condition from the rear differential at certain speeds. This bulletin describes the procedure to inspect the vehicle for the hum or whine noise and, if necessary, to tighten the rear differential lock nut to specification. If the hum or whine noise remains after tightening the lock nut, then this bulletin provides instructions to replace the rear differential or other driveline components as necessary.
Associated Products (20)2027 Genesis G802027 Genesis GV702027 Genesis GV802026 Genesis G802026 Genesis GV702026 Genesis GV802025 Genesis G802025 Genesis GV702025 Genesis GV802024 Genesis G802024 Genesis GV702024 Genesis GV802023 Genesis G802023 Genesis GV702023 Genesis GV802022 Genesis G802022 Genesis GV702022 Genesis GV802021 Genesis G802021 Genesis GV80Associated Documents - July 30, 2026•Document ID: 11036094Warranty Program/ExtensionENGINE
- Mfr Comm. #:
- 26-01-064G TSB
- Date Added:
- August 11, 2026
- Manufacturer:
- GENESIS
SummaryCertain 2026MY G70 (IK) and 2027MY G80 (RG3) vehicles may exhibit a water-flowing or gurgling noise from the front center air vents during engine start-up. This condition may be caused by trapped air within the engine cooling system. Follow the procedure below to properly bleed the cooling system and remove any trapped air.
Associated Products (2)Associated Documents - July 30, 2026•Document ID: 11036092Warranty Program/ExtensionENGINE
- Mfr Comm. #:
- 26-01-064G DCS
- Date Added:
- August 11, 2026
- Manufacturer:
- GENESIS
SummaryCertain 2026MY G70 (IK) and 2027MY G80 (RG3) vehicles may exhibit a water-flowing or gurgling noise from the front center air vents during engine start-up. This condition may becaused by trapped air within the engine cooling system. Technical Service Bulletin (TSB) 26-01-064G provides instructions to properly bleed the cooling system and remove any trapped air.
Associated Products (2)Associated Documents