Genesis G70 Service Bulletins
64 manufacturer communications on file.
- March 20, 2023•Document ID: 10233543Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- 23-AT-001G
- Date Added:
- April 4, 2023
- Manufacturer:
- GENESIS
SummaryWhen servicing a vehicle with a âCheck Engine lightâ and any of the DTCs listed below, follow the Service Procedure to replace the related solenoid and E-module or park position switch.
Associated Products (14)Associated Documents - January 30, 2023•Document ID: 10230903Service Bulletin/Repair InstructionsVISIBILITY
- Mfr Comm. #:
- 23-BD-002G
- Date Added:
- February 2, 2023
- Manufacturer:
- GENESIS
SummaryThis bulletin provides information regarding condensation related to the accumulated moisture in the headlamp, rear combination lamp, daytime running lamp (DRL), or fog lamp. This TSB illustrates the various causes of condensation inside the lamp assembly.
Associated Products (15)Associated Documents - January 20, 2023•Document ID: 10230911Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; VISIBILITY
- Mfr Comm. #:
- 23-01-005G
- Date Added:
- February 2, 2023
- Manufacturer:
- GENESIS
SummaryCertain 2023MY G70 (IK) vehicles may exhibit a condition where the Heads-Up Display (HUD) is not brightly lit during sunny days.
Associated Products (1)Associated Documents - January 11, 2023•Document ID: 10230913Service Bulletin/Repair InstructionsPOWER TRAIN
- Mfr Comm. #:
- 23-01-003G
- Date Added:
- February 2, 2023
- Manufacturer:
- GENESIS
SummarySome of the applicable vehicles may experience torque converter internal rivet damage and cracks. Symptoms may include a scratching noise, and in rare cases, an engine stall at idle or at creep speeds. This bulletin describes the procedure to replace the torque converter.
Associated Products (4)Associated Documents - December 22, 2022•Document ID: 10228633Service Bulletin/Repair InstructionsSERVICE BRAKES, AIR
- Mfr Comm. #:
- 22-01-094G
- Date Added:
- January 4, 2023
- Manufacturer:
- GENESIS
SummaryThis bulletin describes the procedure to perform an Hydraulic Control Unit (HCU) Air Bleeding on certain 2023MY G70 (IK) models to reduce the soft brake pedal feel.
Associated Products (1)Associated Documents - September 8, 2022•Document ID: 10222084Service Bulletin/Repair InstructionsPOWER TRAIN
- Mfr Comm. #:
- 22-01-071G
- Date Added:
- September 27, 2022
- Manufacturer:
- GENESIS
SummarySome of the applicable vehicles may experience torque converter internal rivet damage and cracks. Symptoms may include a scratching noise, and in rare cases, an engine stall at idle or at creep speeds. This bulletin describes the procedure to replace the torque converter.
Associated Products (4)Associated Documents - July 20, 2022•Document ID: 10217309Service Bulletin/Repair InstructionsSTRUCTURE; VISIBILITY:SUN/MOON ROOF ASSEMBLY
- Mfr Comm. #:
- 22-BD-007G
- Date Added:
- August 5, 2022
- Manufacturer:
- GENESIS
SummaryCertain 2019 â 2021MY G70 (IK) vehicles may exhibit abnormal creak and/or rattling noise from the wide sunroof assembly while driving on uneven road conditions. This bulletin outlines the procedures to repair this condition.
Associated Products (1)Associated Documents - February 2, 2022•Document ID: 10253023Service Bulletin/Repair InstructionsSERVICE BRAKES, HYDRAULIC
- Mfr Comm. #:
- 22-01-015G
- Date Added:
- April 11, 2024
- Manufacturer:
- GENESIS
SummaryThis bulletin describes the procedure to inspect and if necessary, repair brake pulsation on dealer stock vehicles only. The procedure described must be performed with the Vehicle Delivery Inspection (VDI) just prior to retail sale. Performing this campaign over 72 hours prior to retail will make the campaign application ineffective.
Associated Products (1)Associated Documents - December 29, 2021•Document ID: 10253020Service Bulletin/Repair InstructionsFUEL SYSTEM, GASOLINE
- Mfr Comm. #:
- 21-01-077G
- Date Added:
- April 11, 2024
- Manufacturer:
- GENESIS
SummaryFUEL CAP INSPECTION AND REPLACEMENT (SERVICE CAMPAIGN T21G)
Associated Products (2)Associated Documents - August 17, 2021•Document ID: 10253048Service Bulletin/Repair InstructionsPOWER TRAIN
- Mfr Comm. #:
- 21-AT-015G
- Date Added:
- April 11, 2024
- Manufacturer:
- GENESIS
SummaryThis TSB provides a procedure to diagnose and repair a transmission for the following Incorrect Ratio DTC (transmission clutch slipping more than 200 rpm in gear).
Associated Products (20)2025 Genesis GV702024 Genesis G702024 Genesis G802024 Genesis G902024 Genesis GV702024 Genesis GV802023 Genesis G702023 Genesis G802023 Genesis G902023 Genesis GV702023 Genesis GV802022 Genesis G702022 Genesis G802022 Genesis G902022 Genesis GV702022 Genesis GV802021 Genesis G702021 Genesis G802021 Genesis G902021 Genesis GV80Associated Documents - May 5, 2021•Document ID: 10253052Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- 21-BE-008G
- Date Added:
- April 11, 2024
- Manufacturer:
- GENESIS
SummaryCertain vehicles may experience 504 Time Out errors when using the Genesis Connected Services Mobile App. When asked to provide Modem Information (IMEI/USIM), the Head Unit (HU) displays all zeros. This bulletin describes the procedure to update the Head Unit Software to correct this condition.
Associated Products (4)Associated Documents - March 30, 2021•Document ID: 10190044Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING; EQUIPMENT
- Mfr Comm. #:
- 21-EM-004H
- Date Added:
- April 7, 2021
- Manufacturer:
- HYUNDAI
SummaryThis bulletin provides the service procedure for engine connecting rod bearing clearance testing. Perform the procedure outlined in this bulletin to fulfill the Bearing Clearance Test inspection requirements to determine next required steps.
Associated Products (12)Associated Documents - February 3, 2021•Document ID: 10253049Service Bulletin/Repair InstructionsEQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
- Mfr Comm. #:
- 21-BD-001G
- Date Added:
- April 11, 2024
- Manufacturer:
- GENESIS
SummaryGenesis applies a Paint Protection Film (PPF) on new vehicles before delivery to dealerships. It provides a barrier between the paint and contaminants, such as rail dust, acid rain, and industrial fallout. In rare cases, the paint can become clouded under the PPF. These spots are the result of moisture trapped between the PPF and the paint.
Associated Products (22)2025 Genesis GV702024 Genesis G702024 Genesis G802024 Genesis G902024 Genesis GV602024 Genesis GV702024 Genesis GV802023 Genesis G702023 Genesis G802023 Genesis G902023 Genesis GV602023 Genesis GV702023 Genesis GV802022 Genesis G702022 Genesis G802022 Genesis G902022 Genesis GV702022 Genesis GV802021 Genesis G702021 Genesis G80+ 2 moreAssociated Documents - November 16, 2020•Document ID: 10253014Service Bulletin/Repair InstructionsSERVICE BRAKES, HYDRAULIC
- Mfr Comm. #:
- 20-01-043G
- Date Added:
- April 11, 2024
- Manufacturer:
- GENESIS
SummaryThis bulletin describes the procedure to inspect and if necessary, repair brake pulsation on dealer stock vehicles only. The procedure described should be preferably performed with the Vehicle Delivery Inspection (VDI) just prior to retail sale. Performing this campaign over 72 hours prior to retail will make the campaign application ineffective.
Associated Products (1)Associated Documents - October 9, 2020•Document ID: 10182304Service Bulletin/Repair InstructionsEQUIPMENT; ELECTRICAL SYSTEM
- Mfr Comm. #:
- 20-01-039H
- Date Added:
- November 6, 2020
- Manufacturer:
- HYUNDAI
SummaryThis bulletin provides information and procedures for collecting OBD âIn Use Monitor Performance Ratioâ (IUMPR) data on certain 2019-2021MY vehicles at California dealers. This reporting is mandated by CARB (California Air Resources Board).
Associated Products (5)Associated Documents - July 27, 2020•Document ID: 10253038Service Bulletin/Repair InstructionsPOWER TRAIN:AUTOMATIC TRANSMISSION; POWER TRAIN
- Mfr Comm. #:
- 21-AT-012G
- Date Added:
- April 11, 2024
- Manufacturer:
- GENESIS
SummaryThis bulletin provides a procedure to transfer oil pressure data to the TCU using GDS Mobile. This procedure is necessary to reduce the TCU learning time and improve the shift quality. ï· Before replacing an automatic transmission (Pages 2~3): Input the data from the new transmission into the TCU using the GDS. ï· Before replacing a TCU (Pages 4~6): Back up the oil pressure data from the old TCU into the GDS and then transfer the data to the new TCM.
Associated Products (16)Associated Documents - July 14, 2020•Document ID: 10178175Service Bulletin/Repair InstructionsEXTERIOR LIGHTING; EQUIPMENT; EQUIPMENT ADAPTIVE/MOBILITY
- Mfr Comm. #:
- 20-BD-014H
- Date Added:
- August 7, 2020
- Manufacturer:
- HYUNDAI
SummaryThis bulletin provides information regarding condensation related to moisture accumulation in the headlamp, rear combination lamp, daytime running lamp (DRL), or fog lamp. The TSB illustrates the various causes of condensation inside the lamp assembly. Lamp assembly replacement is NOT necessary in most cases. This condition can be eliminated by turning on the lamps with the engine running for several minutes, or during normal driving operation.
Associated Products (2)Associated Documents - March 25, 2020•Document ID: 10253047Service Bulletin/Repair InstructionsSTRUCTURE
- Mfr Comm. #:
- 20-BD-008G
- Date Added:
- April 11, 2024
- Manufacturer:
- GENESIS
SummaryThis bulletin describes the procedure to inspect and repair a G70 with the Wide Sunroof exhibiting creaking or rattling.
Associated Products (4)Associated Documents - November 18, 2019•Document ID: 10253031Service Bulletin/Repair InstructionsVISIBILITY; VISIBILITY:REARVIEW MIRRORS/DEVICES; ELECTRICAL SYSTEM
- Mfr Comm. #:
- 19-BE-017G
- Date Added:
- April 11, 2024
- Manufacturer:
- GENESIS
SummaryCertain vehicles (listed below) equipped with the HomeLink5 (Two Way Communication) mirror may experience programming and operating difficulties with the home garage system. This bulletin provides information related to some of the possible symptoms.
Associated Products (12)Associated Documents - September 30, 2019•Document ID: 10253026Service Bulletin/Repair InstructionsPOWER TRAIN; POWER TRAIN:AUTOMATIC TRANSMISSION
- Mfr Comm. #:
- 19-AT-023G
- Date Added:
- April 11, 2024
- Manufacturer:
- GENESIS
SummaryIf you are servicing a vehicle with a transmission slipping concern, follow the Service Procedure shown below and perform a stall test. This TSB provides a procedure to test each clutch in the transmission. If the vehicle fails the stall test, replace the transmission. PASS: Stall speed is between 1700~2900 rpm (See shop manual for stall speed). FAIL: Engine revs to redline limit (6,000~6,500 rpm). If so, replace the transmission.
Associated Products (12)Associated Documents