Ford · Model Report
Ford Explorer2024
Showing safety data for the 2024 model year only.
Ford · Model Report
Showing safety data for the 2024 model year only.
Ford Motor Company (Ford) is recalling certain 2020-2026 Explorer and Lincoln Aviator vehicles. The seat belt anchor bolts at the second-row outer seating positions may be improperly secured.
Ford Motor Company (Ford) is recalling certain 2020-2022 Escape, Lincoln Corsair, 2020-2024 Lincoln Aviator, and Explorer vehicles. The image on the center display may flip or invert, resulting in an incorrectly displayed rearview image when the vehicle is placed in reverse. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 111, "Rear Visibility."
Ford Motor Company (Ford) is recalling certain 2016-2018 Focus, 2019 Explorer, and 2024 Explorer vehicles. The engine block heater may crack and develop a coolant leak, causing it to short circuit when the block heater is plugged in.
Ford Motor Company (Ford) is recalling certain 2024-2026 Explorer and 2024-2026 Lincoln Aviator vehicles. The trailer hitch assembly bolts may be loose.
Ford Motor Company (Ford) is recalling certain 2018-2022 Transit Connect, 2019-2020 MKZ, MKX, Edge, Continental, F-150, Nautilus, Fusion, 2019-2023 Ranger, Mustang, 2020-2021 EcoSport, Expedition, Navigator, 2020-2022 Escape, F-250 SD, Corsair, 2020-2023 Aviator, Transit, 2020-2024 Explorer, 2021-2024 Bronco Sport, and 2022-2024 Maverick vehicles. A software error may cause the rearview camera to display a blank image, or the image may remain on the display after the backing event has ended.
The center display went blank and a/c controls under it would not work. Stopped vehicle and pushed ignition button to off and waited 1 minute and pushed ignition back to on on and display was still blank. Got to destination and pushed ignition to off. The next day when I got into vehicle and pushed ignition button to on the display worked.
No injuries · No fire · No crash
have been getting a warning coming up saying pre-collision sensor not available sensor blocked over 100 times brought it to the dealership and they said that the bracket for the sensor is broken due to road debris, impact or snow and ice buildup with no evidence of any damage
No injuries · No fire · No crash
During a severe, multi-lane impact crash, the second-row outer seatbelts completely failed to maintain restraint and failed to retract. Both occupants in the second-row outer seating positions (ages 5 and 7) sustained visible seatbelt friction burns on their arms from the initial impact, but immediately following the crash, both seatbelts were found completely broken, with all slack pulled completely out and zero mechanical retraction. Both children were found entirely unbuckled and unrestrained immediately following the impact. This vehicle is a Ford Explorer, and this failure matches the exact criteria of an active manufacturer safety recall noted on my insurance documentation (NHTSA Campaign ID: 26V159000 / Ford Recall No: 26C18) regarding second-row outer seatbelt anchor bolts being improperly secured. The vehicle has been declared a total loss, but the components are preserved and currently available for inspection upon request under a temporary insurance evidence hold. How safety was put at risk: The safety of two young children was severely compromised. Because the second-row seatbelt mechanisms or anchor bolts failed mid-crash, the children were left entirely unrestrained and unbuckled inside a moving, colliding vehicle after the initial impact, vastly increasing their risk of severe secondary impact injuries. Has the problem been confirmed by a dealer/independent center? UNKNOWN. The failure occurred during the crash, and the vehicle was towed directly to a holding lot. Has it been inspected by others? The vehicle has been documented by insurance representatives for valuation purposes, but a dedicated mechanical inspection of the failed seatbelt components has not yet been performed. Were there warning lamps or prior symptoms? NO. There were absolutely no warning lights, messages, loose seatbelt components, or mechanical symptoms prior to the crash. The system appeared to be functioning normally until it failed under the stress of the impact.
pre-collision warning light comes up, saying sensor blocked and sensor is not blocked. Brought it to the local dealership found that the cruise control module bracket is damaged no visible damage or strikes to the bumper dealership says not under warranty, and Ford is aware of a widespread issue with the bracket snapping on the sensor behind the front bumper
No injuries · No fire · No crash
Rear windshield wiper doesn't work. Earlier model years have been recalled for wiper motor issues.
No injuries · No fire · No crash