2023-2025 Jeep Compass Catalytic Converter Warranty Extension

Technical Service Bulletin (TSB) 11-003-25, issued on October 28, 2025, details a catalytic converter replacement warranty extension for certain 2023-2025 Jeep Compass and Jeep Meridian vehicles. This bulletin, titled "Catalytic Converter Replacement Warranty Extension XY1," addresses specific diagnostic trouble codes and symptoms related to the exhaust system.

This TSB 11-003-25 applies to vehicles built on or after March 02, 2023 (MDH 0302XX) and on or before July 31, 2025 (MDH 0731XX). Affected vehicles are equipped with a 2.0L I4 Turbo Diesel Engine with ESS (Sales Code EBS).

Important Market Information

While the TSB lists North America (NA) among its market applicability codes, it explicitly notes that this bulletin primarily applies to the India and Asia Pacific markets. Furthermore, the customer symptoms described within the bulletin are stated to apply only to the India market. According to the manufacturer's communication summary, this TSB is not applicable to vehicles built for the US market.

Symptoms of the P2002-00 Fault

Owners of affected vehicles may experience a "Malfunction Indicator Lamp (MIL) illumination" on the dashboard. This MIL light is accompanied by a specific Diagnostic Trouble Code (DTC). For the India market, customers may also report that their vehicle is in "limp mode" and "will not exceed 100 kph (62 mph) speed."

Diagnostic Trouble Code (DTC)

The primary Diagnostic Trouble Code (DTC) associated with this issue is P2002-00. This code indicates a "Diesel Particulate Filter Flow Resistance Monitoring Too High Level 2 Component Or System Operation Obstructed Or Blocked." If your Jeep Compass P2002-00 is showing this code, it points to a potential problem with the catalytic converter system.

Cause of the Issue

The root cause identified for the symptoms and the Jeep Compass P2002-00 DTC is a software issue. This software-related problem leads to the conditions that necessitate the catalytic converter replacement.

Diagnosis

Before performing the repair, technicians must use a scan tool, such as wiTECH, along with the diagnostic procedures available in DealerCONNECT/Service Library. This is to verify that all related systems are functioning correctly. If any other Diagnostic Trouble Codes (DTCs) or symptom conditions are present beyond those specified in this bulletin, they must be recorded and addressed before proceeding with the catalytic converter replacement. If the customer specifically describes the symptoms mentioned in this bulletin, the repair procedure can be initiated.

Required Parts and Tools

To perform the catalytic converter replacement, the following parts are required:

• K68566622AA: Silencer Catalized Exhaust (Catalytic Converter)
• 68081364AA: Gasket, Catalytic Converter (AR)
• 68282995AA: Gasket, Catalytic Converter (AR)
• 68166248AA: Gasket, Exhaust (AR)
• 68338473AA: Gasket, Exhaust (AR)

A wiTECH diagnostic tool or equivalent is also necessary for initial diagnosis and clearing DTCs after the repair.

Repair Procedure Summary

The repair outlined in TSB 11-003-25 involves two main steps. First, the catalytic converter must be replaced. Technicians are directed to consult the detailed service procedures found in the DealerCONNECT/Service Library. Specifically, they should navigate to 'Service Info > 11 - Exhaust System / Catalyst, Selective Catalytic Reduction (SCR) / Removal and Installation' for comprehensive instructions. Second, after the new catalytic converter is installed, all Diagnostic Trouble Codes (DTCs) that may have been set in the vehicle's system must be cleared using a diagnostic tool.

Warranty Information

This bulletin outlines a warranty extension for the catalytic converter replacement. The policy extends the current warranty period by one year from the vehicle's in-service date. For specific details regarding this warranty extension, technicians should refer to Warranty Bulletin: India ID-25-16.

The claims data for this repair is as follows:

• Labor Operation Number: 11-50-01-9Y
• Labor Description: Catalytic Converter - Replace (0 - Introduction)
• Skill Category: 1 - Engine Repair and Performance
• Labor Time: 0.8 Hours
• Failure Code: ZZ

NHTSA ID: 10255858