Ram 2500 Complaints (2017)
698 consumer complaints on file.
- #11738537May 18, 2026SERVICE BRAKES, HYDRAULIC
The contact owns a 2017 RAM 2500. The contact received notice of a recall 24V896000 Service Brakes, Hydraulic) however, the part to do the recall repair was not yet available. The contact stated that while idling the anti lock warning light illuminated. The vehicle was taken to a dealer where it was it was diagnosed that the hydraulic pump for the ABS antilock needed to be replaced but the arts were not yet available. The contact stated a year later while driving at approximately 65 MPH, and the break pedal was depressed, and the tires locked up and he vehicle began to skid. The vehicle was not diagnosed or repaired. The manufacturer was notified of the failure. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The failure mileage was approximately 78,000.
- Crash:
- No
- Fire:
- No
- Injuries:
- 0
- Deaths:
- 0
- #11737349May 12, 2026SERVICE BRAKES, HYDRAULIC
The contact owns a 2017 RAM 2500. The contact stated while driving at an undisclosed speed, the ABS warning light illuminated. The contact stated that the ABS warning indicator was loud and distracting. In addition, the contact stated that the parts had been unavailable for nearly two years. The vehicle was not diagnosed or repaired by an independent mechanic or the dealer. The contact received a recall notification, NHTSA Campaign Number: 24V896000 (Service Brakes, Hydraulic) however the parts were unavailable. The manufacturer was not made aware of the failure. The failure mileage was approximately 70,000.
- Crash:
- No
- Fire:
- No
- Injuries:
- 0
- Deaths:
- 0
- #11734544April 29, 2026SERVICE BRAKES, HYDRAULIC
The contact owns a 2017 Ram 2500. The contact stated that while operating the vehicle, the ABS and traction control warning lights remained illuminated. The message that the 4WD was unavailable was displayed. The cause of the failures was not yet determined. The manufacturer was notified of the failure and informed the contact that the VIN was not included in NHTSA Campaign Number: 24V896000 (SERVICE BRAKES, HYDRAULIC). The contact stated that the vehicle had experienced the failure listed in the recall. The local dealer was not contacted. The failure mileage was 60,000.
- Crash:
- No
- Fire:
- No
- Injuries:
- 0
- Deaths:
- 0
- #11734674April 29, 2026SERVICE BRAKES, VEHICLE SPEED CONTROL, UNKNOWN OR OTHER
This recall for ABS control module went out just after my warranty expired. My truck is a 2017 with just over 60,000 miles and I am scared to haul trailer as the brakes lock up with sudden stops. Also cruise control and traction control won't work and truck constantly dings all the time to remind me I bought a broken truck that RAM don't fell like they have to fix such a hazardous safety issue
- Crash:
- No
- Fire:
- No
- Injuries:
- 0
- Deaths:
- 0
- #11731664April 16, 2026SERVICE BRAKES, HYDRAULIC, POWER TRAIN, ENGINE AND ENGINE COOLING
The contact owns a 2017 Ram 2500. The contact received notification of NHTSA Campaign Number: 24V896000 (Service Brakes, Hydraulic); however, the part to do the recall repair was not available. The contact stated that while driving at various speeds, the ABS and check engine warning lights illuminated. The vehicle was initially taken to the dealer to be diagnosed. The diagnostic test determined that there was a failure with the ECM. The ECM was replaced; however, soon after the repair, the warning lights returned with the vehicle going into LIMP Mode. The vehicle was taken back to dealer, where the vehicle remained for months while attempting to determine the cause of the failure. The contact was then informed that the transmission needed to be replaced. The contact was provided an estimate for the repair, and the vehicle was towed to an independent mechanic, where a diagnostic test indicated a failure with the hydraulic control unit (HCU). Several repairs were performed, but failed to correct the failure. The mechanic replaced the transmission twice; however, the failure returned after each repair. The manufacturer was notified about the failure, and the contact was provided with two case numbers. The vehicle was not repaired and remained with the independent mechanic. The failure mileage was 82,792.
- Crash:
- No
- Fire:
- No
- Injuries:
- 0
- Deaths:
- 0
- #11729397April 6, 2026SERVICE BRAKES, HYDRAULIC
The contact owns a 2017 Ram 2500. The contact received notification of NHTSA Campaign Number: 24V896000 (Service Brakes, Hydraulic); however, the part to do the recall repair was not yet available. The contact stated that the ABS warning light was illuminated, causing the cruise control feature to become inoperable. The vehicle was taken to the dealer, where it was diagnosed, and the dealer determined that the failure was related to the recall. The vehicle was not repaired. The contact stated that the HCU was previously replaced after a similar failure. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the failure. The failure mileage was approximately 30,000.
- Crash:
- No
- Fire:
- No
- Injuries:
- 0
- Deaths:
- 0
- #11728338March 31, 2026SERVICE BRAKES, FORWARD COLLISION AVOIDANCE: AUTOMATIC EMERGENCY BRAKING
Stellantis cant get the part to fix my vehicle. its been over a year. they keep telling me no fix. This is crazy!!!
- Crash:
- No
- Fire:
- No
- Injuries:
- 0
- Deaths:
- 0
- #11728002March 30, 2026STEERING, ELECTRICAL SYSTEM, AIR BAGS
At 31,000 mile my horn is no longer working along with my steering wheel controls on the left side of the wheel. Upon researching online it seems these truck have a common issue with clock spring fail. This is concerning because not only does the clock spring provide power to the horn and steering wheel controls, it could also effect the airbag function.
- Crash:
- No
- Fire:
- No
- Injuries:
- 0
- Deaths:
- 0
- #11727471March 27, 2026SERVICE BRAKES, HYDRAULIC
The contact owns a 2017 Ram 2500. The contact received notification of NHTSA Campaign Number: 24V896000 (Service Brakes, Hydraulic); however, the part to do the recall repair was not yet available. The local dealer was contacted but the vehicle was not repaired. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure.
- Crash:
- No
- Fire:
- No
- Injuries:
- 0
- Deaths:
- 0
- #11726972March 25, 2026SERVICE BRAKES, HYDRAULIC
The contact owns a 2017 Ram 2500. The contact stated that while driving at an undisclosed speed, the ABS and traction control warning lights illuminated. The contact stated that the cruise control function became inoperable after warning lights were illuminated. The contact received notification of NHTSA Campaign Number: 24V896000 (Service Brakes, Hydraulic); however, the part to do the recall repair was not yet available. The dealer was contacted, but the vehicle was not diagnosed or repaired. The dealer confirmed that parts were not yet available and informed the contact that parts were available for the 3500 series vehicles. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the failure. The approximate failure mileage was 117,000.
- Crash:
- No
- Fire:
- No
- Injuries:
- 0
- Deaths:
- 0
- #11726989March 25, 2026SERVICE BRAKES
ABS service light and traction control light keeps coming on. I have taken the vehicle to the dealer only to have the code erased and sent on my way because there is no remedy for this recall. This is unacceptable as a safety recall. Im tired of the light and the dinging coming on constantly plus loosing my abs/ traction control. Mopar needs to do better before someone gets killed!!!
- Crash:
- No
- Fire:
- No
- Injuries:
- 0
- Deaths:
- 0
- #11726275March 23, 2026SERVICE BRAKES, HYDRAULIC
The contact owns a 2017 Ram 2500. The contact received notification of NHTSA Campaign Number: 24V896000 (Service Brakes, Hydraulic); however, the part to do the recall repair was unavailable. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The contact stated that the ABS warning light was illuminated. The dealer was contacted but was unable to provide a date for parts availability. The manufacturer was notified of the issue and confirmed that the part was not yet available for the recall repair. The failure mileage was approximately 21,000.
- Crash:
- No
- Fire:
- No
- Injuries:
- 0
- Deaths:
- 0
- #11726039March 21, 2026POWER TRAIN, SERVICE BRAKES, ENGINE
My 2017 Ram 2500, 6.4L Hemi experiences warning lights which I'm told is caused by intermittent PCM failure. I'm told this can cause the truck to stall while in motion, refuse to start, or enter "limp mode". This amounts to a possible unsafe condition that can put myself and passengers at risk of property damage, bodily injury or worse. I brought the truck to Priority Automotive of Westerly, LLC on March 9, 2026 for diagnosis. Their diagnosis (attached) recommended replacing the PCM to correct (possibly), "...intermittent internal short(s)". Cost of the repair is $2,012.42. Subsequently, I contacted customer care at Stellantis (866-726-4636) and was given Case #[XXX]. I was told to make an appointment at the aforementioned dealership and call them the day before the appointment, so they could send a representative to the dealership for examination. I did exactly that to no avail. No one from Stellantis even contacted the dealership on the appointment date. I called them to find out what happened, only to find out (from a supervisor) that they are not offering assistance in the matter. Additionally, the truck is currently under recall #C4B/NHTSA 24V-896 (PCM related) and, to-date, I'm told the part is still not available after more than a year since the recall. I've owned Dodge Rams for over 27 years and find the situation unsafe and totally unacceptable. I'm also aware that many other owners of the 2017 Ram 2500 6.4L experience PCM/ECM issues, causing no-start conditions or stalling, and have reported them alongside braking system complaints. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
- Crash:
- No
- Fire:
- No
- Injuries:
- 0
- Deaths:
- 0
- #11725891March 20, 2026STEERING, UNKNOWN OR OTHER
This CHEAP fix is abhorrent! It calls for welding an adjustable part of the steering linkage rendering it non- adjustable when having the front end aligned in the future. Not to mention the effect of welding, potentially causing a problem with the integrity of the metal. The correct fix for this SAFETY issue is to REPLACE this steering linkage component, the entire Drag Link! NOT do a "back yard, shade tree mechanic" weld job on the steering linkage of all things! I am appalled that NHTSA approved such a thing. PLEASE revisit this issue and do the right thing. Require Chrysler (FCA US LLC) to REPLACE this defective part with the proper part. Note.... Chrysler is not welding the nuts on the drag links on trucks coming off the assembly line! They are coming off with proper, safe, adjustable drag links! I contacted FCA and they said they cannot redo the recall because it's out of the window to get it repaired again. This is not a safe fix. The recall says after this welding, the vehicle can still get a proper alignment from dealer, which is not true. I contacted the dealer and they said I should contact FCA, but that sent me back to my original issue. I can't get an alignment even though the recall fix says I can. I dealer refuses to do it. I bought this truck used from the dealer and they wouldn't fix it at the time either. I pull a fifth wheel trailer with my truck and I need an alignment. This recall weld fix is just not right, a cheap fix for a long-term problem and very unsafe. Please help and please point me in the right direction. Thank you
- Crash:
- No
- Fire:
- No
- Injuries:
- 0
- Deaths:
- 0
- #11722190March 5, 2026SERVICE BRAKES, HYDRAULIC
The contact's husband owns a 2017 Ram 2500. The contact discovered that the vehicle was included in NHTSA Campaign Number: 24V896000 (Service Brakes, Hydraulic); however, the part to do the recall repair was not yet available. The local dealer was made aware of the issue and confirmed that parts were not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The ABS and "BRAKE" warning lights were illuminated on the instrument panel. The contact stated that due to the brake warning light being illuminated, the vehicle would not be able to pass an upcoming State Inspection. The manufacturer was made aware of the issue. The failure mileage was approximately 110,000.
- Crash:
- No
- Fire:
- No
- Injuries:
- 0
- Deaths:
- 0
- #11722298March 5, 2026SERVICE BRAKES, HYDRAULIC
The contact owns a 2017 Ram 2500. The contact stated that while driving at an undisclosed speed, the brake pedal was depressed; however, the vehicle failed to stop as intended. The contact stated that the vehicle skidded for approximately 25 feet. Several unknown warning lights were illuminated. The contact stated that due to the failure, another vehicle was almost rear-ended. The vehicle was taken to the dealer, where it was diagnosed with HCU failure. The contact was informed that the HCU needed to be replaced. The vehicle was not repaired. The contact was informed that parts were not available to repair the vehicle. The contact received notification of NHTSA Campaign Number: 24V896000 (Service Brakes, Hydraulic); however, the parts to do the recall repair were not yet available. The manufacturer was made aware of the failure and a case was filed. The failure mileage was approximately 78,000.
- Crash:
- No
- Fire:
- No
- Injuries:
- 0
- Deaths:
- 0
- #11721742March 3, 2026SERVICE BRAKES
Nov 27, 2024 Manufacturer Recall Number: C4B - NHTSA Recall Number: 24V-896 Recall Status: Recall Incomplete, remedy not yet available from RAM dealer as they say the parts are still not available to remedy this safety recall for my vehicle. How much longer do i have to wait for this to be fixed? It has been 1 year and 3 months now since recall was issued.
- Crash:
- No
- Fire:
- No
- Injuries:
- 0
- Deaths:
- 0
- #11721457March 2, 2026SERVICE BRAKES, HYDRAULIC
The contact owns a 2017 Ram 2500. The contact received notification of NHTSA Campaign Number: 24V896000 (SERVICE BRAKES, HYDRAULIC); however, the part to do the recall repair was not yet available. The local dealer was contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the issue. The contact had not experienced a failure.
- Crash:
- No
- Fire:
- No
- Injuries:
- 0
- Deaths:
- 0
- #11720367February 25, 2026SERVICE BRAKES, ELECTRICAL SYSTEM, FORWARD COLLISION AVOIDANCE: AUTOMATIC EMERGENCY BRAKING
ABS System Module/System Brake Failure Unsafe and Can not drive anymore The problem was produced December 5, 2024 and they have refused to fix the recall. The problem has been inspected by several local dealerships as well as team Dodge ram and Chrysler Corporation There is warning lights that actually accelerate and go off every 60 seconds as you’re driving. This has been going on for years and it was like this four days to five days after we drove off the car lot and we paid $40,000 for this truck..
- Crash:
- No
- Fire:
- No
- Injuries:
- 0
- Deaths:
- 0
- #11719835February 23, 2026SERVICE BRAKES, FORWARD COLLISION AVOIDANCE: AUTOMATIC EMERGENCY BRAKING
Nov 27,2024 Manufacturer Recall Number: C4B NHTSA Recall Number: 24V-896 Recall Status: Recall Incomplete, remedy not yet available RAM unable to remedy this safety recall for my vehicle
- Crash:
- No
- Fire:
- No
- Injuries:
- 0
- Deaths:
- 0