Ram 2500 Service Bulletins (2014)
516 manufacturer communications on file.
- March 8, 2017•Document ID: 10139976Service Bulletin/Repair InstructionsVISIBILITY:REARVIEW MIRRORS/DEVICES
- Mfr Comm. #:
- 9003216
- Date Added:
- June 11, 2018
- Manufacturer:
- RAM
SummaryPower Fold Rearview Mirror Prior to replacing this part for a loose mirror, please first follow this procedure to reset the pivot mechanism. Move the mirror to its full foward position and then to full retract position using the power fold mirror button located on drivers side door panel. Perform this procedure three times. If this doesn't resolve the issue, then repair as necessary.~ Note: 1- The looseness of power fold mirror does not necessary indicate a defective mirror, it may be caused by folding it manually rather than using the power fold feature. If the mirror is adjusted manually out of the proper detent, always use the button to adjust it back into sync.~ 2- The intended use of the power fold mirrors is by pushing the button to fold and unfold the mirror. Only manually fold the mirrors when absolutely necessary.~ 3- In the circumstance where the left hand mirror and right hand mirror are in different positions, it may take up to three cycles (bottom pushes) to re-sync the mirrors together.
Associated Products (12)Associated Documents - March 2, 2017•Document ID: 10217549Service Bulletin/Repair InstructionsFUEL SYSTEM, GASOLINE; FUEL SYSTEM, DIESEL
- Mfr Comm. #:
- 25-001-17
- Date Added:
- August 8, 2022
- Manufacturer:
- RAM
SummaryDiesel Exhaust Fluid This bulletin provides information regarding the Diesel Exhaust Fluid (DEF) vehicle delivery fill guidelines.
Associated Products (17)Associated Documents - March 2, 2017•Document ID: 10140017Service Bulletin/Repair InstructionsFUEL SYSTEM, DIESEL; ENGINE AND ENGINE COOLING:ENGINE:DIESEL
- Mfr Comm. #:
- 25-001-17
- Date Added:
- June 11, 2018
- Manufacturer:
- RAM
SummaryDiesel Exhaust Fluid This bulletin provides information regarding the Diesel Exhaust Fluid (DEF) vehicle delivery fill guidelines.
Associated Products (17)Associated Documents - March 1, 2017•Document ID: 10140011Service Bulletin/Repair InstructionsVISIBILITY:REARVIEW MIRRORS/DEVICES:EXTERIOR
- Mfr Comm. #:
- D-16-28 Rev. A
- Date Added:
- June 11, 2018
- Manufacturer:
- RAM
SummaryDAPAP Requirements - Addition of Exterior Mirrors (Rev. A)
Associated Products (49)2019 Ram 15002018 Ram 15002018 Ram 25002018 Ram 35002018 Ram 45002018 Ram 55002018 Ram Promaster City2017 Ram 15002017 Ram 25002017 Ram 35002017 Ram 45002017 Ram 55002017 Ram Promaster City2016 Ram 15002016 Ram 25002016 Ram 35002016 Ram 45002016 Ram 55002016 Ram ProMaster 35002016 Ram Promaster City+ 29 moreAssociated Documents - March 1, 2017•Document ID: 10139985Service Bulletin/Repair InstructionsSEAT BELTS
- Mfr Comm. #:
- 9003681
- Date Added:
- June 11, 2018
- Manufacturer:
- CHRYSLER
SummaryRestraints Information Sheet (I-Sheet) has been added to Star Parts. Print I-Sheet for technician use.
Associated Products (257)2017 Chrysler 2002017 Chrysler 3002017 Chrysler 300C2017 Chrysler Pacifica2017 Chrysler Town and Country2017 Dodge Challenger2017 Dodge Charger2017 Dodge Durango2017 Dodge Grand Caravan2017 Dodge Journey2017 Dodge Viper2017 Fiat 124 Spider2017 Fiat 5002017 Fiat 500e2017 Fiat 500X2017 Jeep Cherokee2017 Jeep Compass2017 Jeep Grand Cherokee2017 Jeep Patriot2017 Jeep Renegade+ 237 moreAssociated Documents - November 11, 2016•Document ID: 10121863Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; ELECTRONIC STABILITY CONTROL:AUTOMATIC (ASC)
- Mfr Comm. #:
- 08-046-16 REV. A
- Date Added:
- November 3, 2017
- Manufacturer:
- RAM
SummaryFlash: Air Suspension Control Module (ASCM) System Enhancements This Bulletin involves updating the (ASCM) software. A customer may describe the following: Cluster stays awake after ignition is turned off for 10 minutes or more. False message ?Battery Voltage Low - Start Engine to Change Ride Height? which appears in the Electronic Vehicle Information Center (EVIC). This condition may occur when the vehicle is first started and the suspension is switched from alternate trailer ride height to normal ride height.
Associated Products (6)Associated Documents - September 21, 2016•Document ID: 10223866Service Bulletin/Repair InstructionsELECTRICAL SYSTEM:WIRING:CONNECTORS/PLUGS:ACCESORY POWER OUTLET/JACK/PORT/USB/SAE/CIGARETTE LIGHTER
- Mfr Comm. #:
- 68158770
- Date Added:
- October 17, 2022
- Manufacturer:
- RAM
SummaryUSB Charging Port Before replacing this part - this is a charge only USB port intended to charge smart phones and other low power USB devices. To verify proper functionality, turn on the ignition with no cables or devices plugged into the port. Connect a charging cable to the port, then connect the device. If the device receives power, the port is functioning to design. There are some minor compatibility issues with some charging cables including Apple Lightning cables. For questions regarding the charging port functionality, please call Dave Diovardi at Cell (248) 941-8704 or Rick Gordon at Cell (248) 630-6281.~
Associated Products (12)Associated Documents - September 14, 2016•Document ID: 10223828Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; EQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC.
- Mfr Comm. #:
- 0804416
- Date Added:
- October 17, 2022
- Manufacturer:
- RAM
SummaryFlash: Radio Frequency Hub Module (RFHM) Enhancement This bulletin involves reprogramming the RFHM module with the latest available software. Customers may describe the instrument cluster is illuminating by itself after the ignition has been off for an extended period of time (10 minutes or more).
Associated Products (10)Associated Documents - September 7, 2016•Document ID: 10223855Service Bulletin/Repair InstructionsVISIBILITY/WIPER
- Mfr Comm. #:
- 05152029
- Date Added:
- October 17, 2022
- Manufacturer:
- CHRYSLER
SummaryWasher Fluid Level Sensor Prior to replacing this part due to "Low Washer Fluid" tell tale light on the dash and the washer fluid bottle is full, please perform the this inspection. Inspect the sensor for a fluid coating on the sensor pins. Orange colored rain repellant can cause this fluid build-up. Clean the pins, drain the reservoir, and fill with Mopar approved washer fluid. Check to determine if the issue has been resolved. Continue with repair if necessary. Also, please inform the customer not to use Rain-X in the system to avoid this issue. Please contact Chuck Hood at cell (248) 613-7591 if you have questions or need additional information. Thank you.
Associated Products (183)2018 Alfa Romeo 4C2018 Alfa Romeo Stelvio2018 Chrysler 2002018 Chrysler 3002018 Chrysler Pacifica2018 Chrysler Town and Country2018 Dodge Challenger2018 Dodge Charger2018 Dodge Durango2018 Dodge Grand Caravan2018 Dodge Journey2018 Fiat 124 Spider2018 Fiat 5002018 Fiat 500X2018 Jeep Cherokee2018 Jeep Compass2018 Jeep Grand Cherokee2018 Jeep Patriot2018 Jeep Renegade2018 Jeep Wrangler+ 163 moreAssociated Documents - September 7, 2016•Document ID: 10223854Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- 68332810
- Date Added:
- October 17, 2022
- Manufacturer:
- DODGE
SummaryService - Four Piece Oil Pan Gasket All Cummins Equipped Vehicles ONLY - The replacement oil pan gasket can be a four piece gasket rather than a single piece gasket. This applies to Cummins 5.9L and 6.7L engines only. Installation: 1. Clean the oil pan T-joints.~ 2. Fill the T-joint between the pan rail/gear housing and pan rail/rear seal retainer with sealant. Use Mopar® Silicone Rubber Adhesive Sealant or equivalent. 3. Apply a 2-mm [0.063-in] bead of Mopar Engine Sealant RTV Silicone Rubber Adhesive, to the oil pan flange.~ 4. The four piece gasket will need to be assembled to make a complete oil pan gasket. 5. Lay the oil pan gasket(s) onto the oil pan flange.~ 6. Ensure the oil pan gasket segment joints are properly aligned. 7. Apply a 2-mm [0.063-in] bead of Mopar Engine Sealant RTV Silicone Rubber Adhesive, to the top of the oil pan gasket.~ 8. Install the oil pan. Starting from the center and working outward, tighten the oil pan bolts to 28 N·m [21 ft. lbs.].
Associated Products (149)2017 Ram 15002017 Ram 25002017 Ram 35002017 Ram 45002017 Ram 55002017 Ram Promaster City2016 Ram 15002016 Ram 25002016 Ram 35002016 Ram 45002016 Ram 55002016 Ram ProMaster 35002016 Ram Promaster City2015 Ram 15002015 Ram 25002015 Ram 35002015 Ram 45002015 Ram 55002015 Ram ProMaster 25002015 Ram Promaster City+ 129 moreAssociated Documents - August 31, 2016•Document ID: 10121737Service Bulletin/Repair InstructionsENGINE; ELECTRICAL SYSTEM
- Mfr Comm. #:
- 68210071A$
- Date Added:
- November 3, 2017
- Manufacturer:
- DODGE
SummaryIntake Grid Heater Grid Heater Relay 2012 - 2016 6.7L Cummins engines with Intake Heater issues or DTC P2609 and P0542, please replace the Intake Heater Grid and Relay as a set. 68210071A$ (relay) and 05187880A$ (grid). Inspect electrical cable between the heater grid and relay for signs of possible overheating. Replace cable as necessary.
Associated Products (13)Associated Documents - August 24, 2016•Document ID: 10226283Service Bulletin/Repair InstructionsSTRUCTURE; EQUIPMENT
- Mfr Comm. #:
- Parts
- Date Added:
- November 21, 2022
- Manufacturer:
- DODGE
SummaryCenter Console.
Associated Products (17)Associated Documents - August 24, 2016•Document ID: 10130082Service Bulletin/Repair InstructionsSTRUCTURE
- Mfr Comm. #:
- 5LT86XDVA$
- Date Added:
- March 13, 2018
- Manufacturer:
- RAM
SummaryCenter Console If vehicle comes in for squeaking, clicking, or binding of the center console lid, verify the complaint by cycling the upper console lid. Check for a green dot sticker on the back of the console behind the rear panel by the hinge. ~ If the above complaint is verified and the console DOES NOT have a green dot sticker near the hinge (behind the back panel), order kit PN 68315574AA and install per the included instructions. Otherwise continue with the repair. Please reference TSB 23-001-16 Rev. E (or later version).
Associated Products (14)Associated Documents - August 19, 2016•Document ID: 10217742Service Bulletin/Repair InstructionsPOWER TRAIN; ENGINE AND ENGINE COOLING; ELECTRICAL SYSTEM:SOFTWARE; EQUIPMENT
- Mfr Comm. #:
- 18-096-16
- Date Added:
- August 15, 2022
- Manufacturer:
- RAM
SummaryFlash: 6.4L Diagnostic And System Improvements This bulletin involves selectively erasing and reprogramming the Powertrain Control Module (PCM) with new software. NOTE: **This bulletin contains optional software update that should only be used in situations where the customer is specifically complaining of a Drone Noise, Shudder, Pulsation, or Vibration under light throttle applications while vehicle is operating in MDS/ECO mode. There will be two separate software options displayed on the wiTECH flash tab. The software file released for this condition contains the verbiage ?OPTIONAL?. The other file is the standard software that does not contain improvements for the Drone/Shudder concern. If for some reason the customer finds this shudder improvement objectionable, the PCM software may be returned/reflashed to the standard version. Both software versions will address the remaining conditions noted in the bulletin. A small number of customers may experience a surge, shudder or pulsation type sensation when driving on smooth road surfaces at highway speeds of 64-129 km/h (40-80 mph).** During normal diagnostics a technician may find one or more of the following Diagnostic Trouble Codes (DTCs) present: · **P0335 - Crankshaft Position Sensor Circuit.** · P0300 - Multiple Cylinder Misfire, cold Idle misfire (DJ,D2 or DD vehicles only). · P030X - Cylinder Misfire (any cylinder). · P04D1 - Cooled EGR Temperature Sensor Circuit High. · P04D0 - Cooled EGR Temperature Sensor Circuit Low. · P2504 - Charging System Output High. · P0441 - Evap Purge System Performance. · P2066 - Fuel Level Sensor 2 Performance. · P0401 - EGR System Performance (DJ/D2 vehicles only). · P2096 - Downstream Fuel Trim System 1 Lean (DD/DP vehicles only). · P2098 - Downstream Fuel Trim System 2 Lean (DD/DP vehicles only). ·
Associated Products (4)Associated Documents - August 19, 2016•Document ID: 10135118Service Bulletin/Repair InstructionsPOWER TRAIN; ENGINE AND ENGINE COOLING
- Mfr Comm. #:
- 18-096-16
- Date Added:
- May 7, 2018
- Manufacturer:
- RAM
SummaryFlash: 6.4L Diagnostic And System Improvements This bulletin involves selectively erasing and reprogramming the Powertrain Control Module (PCM) with new software. NOTE: **This bulletin contains optional software update that should only be used in situations where the customer is specifically complaining of a Drone Noise, Shudder, Pulsation, or Vibration under light throttle applications while vehicle is operating in MDS/ECO mode. There will be two separate software options displayed on the wiTECH flash tab. The software file released for this condition contains the verbiage ?OPTIONAL?. The other file is the standard software that does not contain improvements for the Drone/Shudder concern. If for some reason the customer finds this shudder improvement objectionable, the PCM software may be returned/reflashed to the standard version. Both software versions will address the remaining conditions noted in the bulletin. A small number of customers may experience a surge, shudder or pulsation type sensation when driving on smooth road surfaces at highway speeds of 64-129 km/h (40-80 mph).** During normal diagnostics a technician may find one or more of the following Diagnostic Trouble Codes (DTCs) present: · **P0335 - Crankshaft Position Sensor Circuit.** · P0300 - Multiple Cylinder Misfire, cold Idle misfire (DJ,D2 or DD vehicles only). · P030X - Cylinder Misfire (any cylinder). · P04D1 - Cooled EGR Temperature Sensor Circuit High. · P04D0 - Cooled EGR Temperature Sensor Circuit Low. · P2504 - Charging System Output High. · P0441 - Evap Purge System Performance. · P2066 - Fuel Level Sensor 2 Performance. · P0401 - EGR System Performance (DJ/D2 vehicles only). · P2096 - Downstream Fuel Trim System 1 Lean (DD/DP vehicles only). · P2098 - Downstream Fuel Trim System 2 Lean (DD/DP vehicles only). ·
Associated Products (3)Associated Documents - August 19, 2016•Document ID: 10129033Service Bulletin/Repair InstructionsELECTRICAL SYSTEM:SOFTWARE
- Mfr Comm. #:
- 18-096-16
- Date Added:
- February 21, 2018
- Manufacturer:
- RAM
SummaryFlash: 6.4L Diagnostic And System Improvements This bulletin involves selectively erasing and reprogramming the Powertrain Control Module (PCM) with new software. NOTE: **This bulletin contains optional software update that should only be used in situations where the customer is specifically complaining of a Drone Noise, Shudder, Pulsation, or Vibration under light throttle applications while vehicle is operating in MDS/ECO mode. There will be two separate software options displayed on the wiTECH flash tab. The software file released for this condition contains the verbiage ?OPTIONAL?. The other file is the standard software that does not contain improvements for the Drone/Shudder concern. If for some reason the customer finds this shudder improvement objectionable, the PCM software may be returned/reflashed to the standard version. Both software versions will address the remaining conditions noted in the bulletin. A small number of customers may experience a surge, shudder or pulsation type sensation when driving on smooth road surfaces at highway speeds of 64-129 km/h (40-80 mph).** During normal diagnostics a technician may find one or more of the following Diagnostic Trouble Codes (DTCs) present: · **P0335 - Crankshaft Position Sensor Circuit.** · P0300 - Multiple Cylinder Misfire, cold Idle misfire (DJ,D2 or DD vehicles only). · P030X - Cylinder Misfire (any cylinder). · P04D1 - Cooled EGR Temperature Sensor Circuit High. · P04D0 - Cooled EGR Temperature Sensor Circuit Low. · P2504 - Charging System Output High. · P0441 - Evap Purge System Performance. · P2066 - Fuel Level Sensor 2 Performance. · P0401 - EGR System Performance (DJ/D2 vehicles only). · P2096 - Downstream Fuel Trim System 1 Lean (DD/DP vehicles only). · P2098 - Downstream Fuel Trim System 2 Lean (DD/DP vehicles only). ·
Associated Products (3)Associated Documents - August 10, 2016•Document ID: 10140210Service Bulletin/Repair InstructionsVEHICLE SPEED CONTROL
- Mfr Comm. #:
- 20614
- Date Added:
- June 11, 2018
- Manufacturer:
- RAM
SummaryP/N 68111384AB: Inspect &Return: Switch - Speed Control You have been identified as either having stock, or have stock in transit to your dealership. Please return parts which have a pacakging date code of July 20th 2016. Reference pictures attached for suspect part identification. Please return parts backto your facing depot using Return Code 02, before 31 August, 2016.
Associated Products (49)2019 Ram 15002018 Ram 15002018 Ram 25002018 Ram 35002018 Ram 45002018 Ram 55002018 Ram Promaster City2017 Ram 15002017 Ram 25002017 Ram 35002017 Ram 45002017 Ram 55002017 Ram Promaster City2016 Ram 15002016 Ram 25002016 Ram 35002016 Ram 45002016 Ram 55002016 Ram ProMaster 35002016 Ram Promaster City+ 29 moreAssociated Documents - August 10, 2016•Document ID: 10140209Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING:EXHAUST SYSTEM:MANIFOLD/HEADER/MUFFLER/TAIL PIPE; ENGINE
- Mfr Comm. #:
- 22842
- Date Added:
- June 11, 2018
- Manufacturer:
- DODGE
Summary05187880AC - Inspect and Return: Relay Assy - Heater Intake Air You have been identified as either having stock, or have stock in transit to your dealership. Please return suspect stock of part number 05187880AC. See attachments for identifying suspect stock. Please return suspect parts back to your facing depot using Return Code 02, before 31st August, 2016.
Associated Products (49)2019 Ram 15002018 Ram 15002018 Ram 25002018 Ram 35002018 Ram 45002018 Ram 55002018 Ram Promaster City2017 Ram 15002017 Ram 25002017 Ram 35002017 Ram 45002017 Ram 55002017 Ram Promaster City2016 Ram 15002016 Ram 25002016 Ram 35002016 Ram 45002016 Ram 55002016 Ram ProMaster 35002016 Ram Promaster City+ 29 moreAssociated Documents - August 10, 2016•Document ID: 10140207Service Bulletin/Repair InstructionsEXTERIOR LIGHTING:TAIL LIGHTS; EXTERIOR LIGHTING
- Mfr Comm. #:
- 22843
- Date Added:
- June 11, 2018
- Manufacturer:
- RAM
SummaryInspect and Return: Lamp Assy - Tail Light Rt/L You have been identified as either having stock, or have stock in transit to your dealership. Please return suspect stock of following part numbers: 68110016AC, 68110016AD, 68110016AE, 68110017AD, 68236104AC, 68236105AB. See attachments for identifying suspect stock. Please return suspect parts back to your facing depot using Return Code 02, before 31 August, 2016.
Associated Products (49)2019 Ram 15002018 Ram 15002018 Ram 25002018 Ram 35002018 Ram 45002018 Ram 55002018 Ram Promaster City2017 Ram 15002017 Ram 25002017 Ram 35002017 Ram 45002017 Ram 55002017 Ram Promaster City2016 Ram 15002016 Ram 25002016 Ram 35002016 Ram 45002016 Ram 55002016 Ram ProMaster 35002016 Ram Promaster City+ 29 moreAssociated Documents - August 8, 2016•Document ID: 10140206Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- 20610
- Date Added:
- June 11, 2018
- Manufacturer:
- RAM
SummaryP/N 04573460 - Inspect &Return: Rocker Assy - Intake Valve RT You have been identified as either having stock, or have stock in transit to your dealership. Please return part number 04573460 which have a packaging date of 2016-06-13. Reference attached picture for reference. Please return suspect parts back to your facing depot using Return Code 02, before 29 August, 2016.
Associated Products (49)2019 Ram 15002018 Ram 15002018 Ram 25002018 Ram 35002018 Ram 45002018 Ram 55002018 Ram Promaster City2017 Ram 15002017 Ram 25002017 Ram 35002017 Ram 45002017 Ram 55002017 Ram Promaster City2016 Ram 15002016 Ram 25002016 Ram 35002016 Ram 45002016 Ram 55002016 Ram ProMaster 35002016 Ram Promaster City+ 29 moreAssociated Documents