Porsche Cayenne Service Bulletins
1,856 manufacturer communications on file.
- November 16, 2018•Document ID: 10188269Service Bulletin/Repair InstructionsEQUIPMENT; ENGINE AND ENGINE COOLING; EQUIPMENT ADAPTIVE/MOBILITY
- Mfr Comm. #:
- 122-V2W7U-12
- Date Added:
- March 5, 2021
- Manufacturer:
- PORSCHE
SummaryResubmitting at request of Mr. Bernard Hardgrave. Instructions on how to rework the exhaust system on the Cayenne S in the every that there is a buzzing noise from the Exhaust system during deceleration.
Associated Products (2)Associated Documents - November 16, 2018•Document ID: 10166855Service Bulletin/Repair InstructionsEQUIPMENT; TRAILER HITCHES
- Mfr Comm. #:
- 122-V6A2F-10
- Date Added:
- October 31, 2019
- Manufacturer:
- PORSCHE
SummaryPorsche Intranet posting for WJ75 campaign, which seeks to check the towing lug on affected vehicles and replace if necessary.
Associated Products (2)Associated Documents - November 16, 2018•Document ID: 10153578Service Bulletin/Repair InstructionsEQUIPMENT
- Mfr Comm. #:
- 122-H6L3Q-12
- Date Added:
- February 25, 2019
- Manufacturer:
- PORSCHE
SummaryG2 Panamera and E3 Cayenne Coaxial cable ordering concept
Associated Products (4)Associated Documents - November 16, 2018•Document ID: 10153572Service Bulletin/Repair InstructionsSEAT BELTS
- Mfr Comm. #:
- 122-H3B8Q-12
- Date Added:
- February 25, 2019
- Manufacturer:
- PORSCHE
SummaryInformation: Seat-belt buckles that do not meet the required specifications were installed for the right rear seat on the affected vehicles. As a result, the required restraint function cannot be guaranteed in the event of a head-on collision. Remedial Action: Replace right rear seat-belt buckle.
Associated Products (1)Associated Documents - November 16, 2018•Document ID: 10153571Service Bulletin/Repair InstructionsEQUIPMENT
- Mfr Comm. #:
- 122-C4D6M-12
- Date Added:
- February 25, 2019
- Manufacturer:
- PORSCHE
SummaryInformation: Due to a control error while completing the tool kit, there is a possibility that a towing lug with right thread instead of left thread was supplied with the affected vehicles. As a result, the supplied towing lug cannot be installed as described in the Owner's Manual. The vehicle cannot therefore be towed and cannot tow other vehicles using this towing lug.
Associated Products (2)Associated Documents - October 26, 2018•Document ID: 10147458Service Bulletin/Repair InstructionsEQUIPMENT
- Mfr Comm. #:
- 122-Y3U4Z-11
- Date Added:
- November 13, 2018
- Manufacturer:
- PORSCHE
SummaryService Information The PIWIS tester message claims that the vehicle fails a check of radio communication reception. PAG is aware of this condition and is investigating the root cause. At this time, when this condition is not accompanied by fault codes or warnings, the message should be ignored. Do not attempt a repair or further diagnosis.
Associated Products (1)Associated Documents - October 26, 2018•Document ID: 10147457Service Bulletin/Repair InstructionsSTRUCTURE
- Mfr Comm. #:
- 122-H9B3X-11
- Date Added:
- November 13, 2018
- Manufacturer:
- PORSCHE
SummaryTechnical Background Slight variations in the molding process are causing this phenomenon. Porsche is currently working closely with the supplier to improve the processes and eliminate the possibility of these issues occurring.
Associated Products (1)Associated Documents - October 10, 2018•Document ID: 10166750Service Bulletin/Repair InstructionsEQUIPMENT:OTHER:LABELS; FUEL SYSTEM, GASOLINE
- Mfr Comm. #:
- 122-R9F7K-10
- Date Added:
- October 31, 2019
- Manufacturer:
- PORSCHE
SummaryPorsche Intranet posting about WH50 campaign, which seeks to replace fuel type stickers on affected vehicles.
Associated Products (3)Associated Documents - September 26, 2018•Document ID: 10145567Service Bulletin/Repair InstructionsELECTRICAL SYSTEM:SOFTWARE; EQUIPMENT
- Mfr Comm. #:
- 122-N8X6K-10
- Date Added:
- October 15, 2018
- Manufacturer:
- PORSCHE
SummaryComplaint - PCM 5.0 Integrated System: Repair instructions (132/18)
Associated Products (1)Associated Documents - September 26, 2018•Document ID: 10145566Service Bulletin/Repair InstructionsPOWER TRAIN:TRANSFER CASE (4-WHEEL DRIVE); ENGINE
- Mfr Comm. #:
- 122-X3H4Z-10
- Date Added:
- October 15, 2018
- Manufacturer:
- PORSCHE
SummaryCause: Clicking noises can come from around the transfer case when manoeuvring the vehicle (or driving slowly) due to activation of the transfer case servo motor. Remedial action: Before doing any other work, the symptommust be simulated using a test procedure. (Opening the door windows can be helpful when evaluating noises). 1 Conditions for the first test procedure: ? Activate the Start/Stop function and ? deactivate all sources of noise in the vehicle (Entertainment, ventilation, etc.). ? A multi-storey parking garage can be useful for acoustic reverberation. ? Onastraight stretch ? fromspeeds less than 10mph (20 km/h) ? brake the vehicle to a standstill. ? The best way of finding the clicking noise is by driving slowly and then stopping the vehicle.
Associated Products (7)Associated Documents - September 18, 2018•Document ID: 10145562Service Bulletin/Repair InstructionsELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL
- Mfr Comm. #:
- 122-K8T6V-10
- Date Added:
- October 15, 2018
- Manufacturer:
- PORSCHE
SummarySubject: Instrument cluster Information: Due to a faulty Timer function for the internal clock in the instrument cluster, there is a possibility that the control unit system will be activated cyclically by the instrument cluster after stopping the vehicle. As a result, the control unit system will not be switched to energy-saving mode, resulting in increased closed-circuit current consumption. This can deplete the vehicle battery if the vehicle is idle for a long time.
Associated Products (1)Associated Documents - September 11, 2018•Document ID: 10145559Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL
- Mfr Comm. #:
- 122-P2Q5Z-10
- Date Added:
- October 15, 2018
- Manufacturer:
- PORSCHE
SummarySubject: Documentation of the implementation of AG01 Emissions Recall in the IN-FORM tool Information: The implementation of campaign "AG01 Emissions Recall" was not documented fully according to specifications in the IN-FORM tool on the affected vehicles.
Associated Products (4)Associated Documents - September 7, 2018•Document ID: 10145554Service Bulletin/Repair InstructionsPOWER TRAIN:DRIVELINE:DIFFERENTIAL UNIT
- Mfr Comm. #:
- 122-E3W4E-10
- Date Added:
- October 15, 2018
- Manufacturer:
- PORSCHE
SummarySymptom: The yellow warning message "Rear differential lock failure Adapted driving permitted" can appear in the instrument cluster. Cause: The yellow warning message can appear in the instrument cluster due to defective control unit software.
Associated Products (1)Associated Documents - September 5, 2018•Document ID: 10166860Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING; FUEL SYSTEM, DIESEL
- Mfr Comm. #:
- 122-X6X7Y-10
- Date Added:
- October 31, 2019
- Manufacturer:
- PORSCHE
SummaryPorsche intranet posting for campaign WH70, which seeks to replace the heating element of the AdBlue reducing agent on affected Diesel vehicles.
Associated Products (4)Associated Documents - August 23, 2018•Document ID: 10148792Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- 122-F9S5J-09
- Date Added:
- November 19, 2018
- Manufacturer:
- PORSCHE
SummaryCause The control unit for the auxiliary alarm system has limited bus communication. Date of Introduction Control units for the auxiliary alarm system with updated software have been used in production since the beginning of December 2017.
Associated Products (35)2018 Porsche 718 Boxster2018 Porsche Cayenne2018 Porsche Panamera2017 Porsche 718 Boxster2017 Porsche 718 Cayman2017 Porsche Cayenne2017 Porsche Panamera2016 Porsche 718 Boxster2016 Porsche 718 Cayman2016 Porsche Cayenne2016 Porsche Panamera2015 Porsche Boxster2015 Porsche Cayenne2015 Porsche Cayman2015 Porsche Panamera2014 Porsche Boxster2014 Porsche Cayenne2014 Porsche Cayman2014 Porsche Panamera2013 Porsche Boxster+ 15 moreAssociated Documents - August 17, 2018•Document ID: 10148791Service Bulletin/Repair InstructionsTIRES:PRESSURE MONITORING AND REGULATING SYSTEMS
- Mfr Comm. #:
- 122-P4L5H-09
- Date Added:
- November 19, 2018
- Manufacturer:
- PORSCHE
SummaryEquipment: Tire Pressure Monitoring (TPM) 433 MHz (I-no. 7K3) Subject: Control unit for Tire Pressure Monitoring (TPM)
Associated Products (4)Associated Documents - August 17, 2018•Document ID: 10148779Service Bulletin/Repair InstructionsSERVICE BRAKES, HYDRAULIC
- Mfr Comm. #:
- 122-K3E2B-09
- Date Added:
- November 19, 2018
- Manufacturer:
- PORSCHE
SummarySubject: Retainer spring for front brake pad Symptom: A clicking noise can come from around the front axle when changing direction of travel or when braking suddenly while driving slowly. Cause: During load changes or changes in direction, the brake pads can hit against the brake caliper and cause the clicking noise.
Associated Products (2)Associated Documents - August 17, 2018•Document ID: 10148778Service Bulletin/Repair InstructionsSERVICE BRAKES, HYDRAULIC
- Mfr Comm. #:
- 122-C4M9S-09
- Date Added:
- November 19, 2018
- Manufacturer:
- PORSCHE
SummarySubject: Rear disc brake pads Symptom: If the vehicle is braked while driving at low speeds, a squealing noise can be heard shortly before the vehicle comes to a standstill. Cause: The disc brake pads can cause the squealing noise due to a change in the manufacturing process used by the supplier.
Associated Products (1)Associated Documents - August 17, 2018•Document ID: 10148777Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- 122-M4Q2P-09
- Date Added:
- November 19, 2018
- Manufacturer:
- PORSCHE
SummaryIn the event of a complaint about low battery voltage in the vehicle electrical system and/or if the vehicle cannot be started or unlocked, the following instructionsmust be followed before doing any other work. Read out the hardware version fromthe instrument cluster and life cycle data from the gateway as described below (under 'Conditions'): ? If the hardware version that is read out = "011" and the life cycle data value is "20" at least once, ? aVehicle Analysis Log (VAL) must be created and attached to the PQIS claim and ? the work described under 'Action required' must be carried out.
Associated Products (1)Associated Documents - August 1, 2018•Document ID: 10148786Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- 122-R7X8Y-09
- Date Added:
- November 19, 2018
- Manufacturer:
- PORSCHE
SummaryCustomer Concern Customer complains of vehicle stalling and/or Check Engine Light illuminated (DME fault code ?P032200 Engine speed sender - no signal? or ?P032100 - Engine speed sensor, implausible signal? may be stored). Technical Background The crankshaft position sensor can have an intermittent internal electrical connection. It is from a bad batch produced at the supplier in April 2017. Vehicles built in late 2017 model year and very early 2018 model year may have one of these sensors.
Associated Products (2)Associated Documents