Nissan Sentra Service Bulletins
710 manufacturer communications on file.
- April 19, 2018•Document ID: 10138224Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING; EQUIPMENT
- Mfr Comm. #:
- NTB16-086b
- Date Added:
- May 21, 2018
- Manufacturer:
- NISSAN
Summary2013-2014 SENTRA; ENGINE TURNS OFF OR HESITATES WHEN ACCELERATING FROM A STOP DURING HOT AMBIENT TEMPERATURES (100°F OR MORE) This bulletin has been amended to update Table A. No other changes were made. Discard previous versions of this bulletin.
Associated Products (2)Associated Documents - April 9, 2018•Document ID: 10138223Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING; EQUIPMENT; ELECTRICAL SYSTEM
- Mfr Comm. #:
- NTB16-018c
- Date Added:
- May 21, 2018
- Manufacturer:
- NISSAN
SummaryMIL ON WITH P0603 STORED FOR ECM BACK UP CIRCUIT This bulletin does NOT apply to Titan equipped with Cummins V8 Diesel engine. This bulletin has been amended to add a NOTE in the Applied Vehicles. No other changes have been made. Please discard previous versions of this bulletin.
Associated Products (95)2019 Nissan 370Z2019 Nissan Altima2019 Nissan Armada2019 Nissan Frontier2019 Nissan GT-R2019 Nissan Kicks2019 Nissan Leaf2019 Nissan Maxima2019 Nissan Murano2019 Nissan NV2019 Nissan NV2002019 Nissan Pathfinder2019 Nissan Rogue2019 Nissan Rogue Sport2019 Nissan Sentra2019 Nissan Titan2019 Nissan Versa2019 Nissan Versa Note2018 Nissan 370Z2018 Nissan Altima+ 75 moreAssociated Documents - April 5, 2018•Document ID: 10139450Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- P8307
- Date Added:
- June 4, 2018
- Manufacturer:
- NISSAN
SummaryECM Reprogram Dealer Inventory This bulletin applies only to vehicles equipped with 1.6L engine (SR and NISMO trim levels). *****Dealer Announcement***** Nissan is conducting a quality action to update the Engine Control Module (ECM) software to prevent permanent storage of a DTC as a result of a Multiway Control Valve (MCV) malfunction on 1,013 specific 2018 Nissan Sentra (B17) SR and NISMO vehicles equipped with the MR16DDT engine. If a MCV malfunction occurred and was repaired, the current ECM logic will allow a technician to reset the Malfunction Indicator Lamp (MIL), but the DTC will remain stored in ECM memory. Resulting in Inspection/Maintenance (I/M; a.k.a. smog test) failure when a DTC check is performed at an inspection station. Affected vehicles are not subject to stop sale and are either currently in dealer inventory or assigned and in transit to the dealer. In the interest of customer satisfaction, Nissan requests dealers to update the ECM software on the affected vehicles prior to retail sale. *****What Dealers Should Do***** 1. Verify if vehicles currently in new dealer inventory are affected by this quality action using Service Comm or DBS National Service History ? Open Campaign I.D. P8307 - New vehicles in dealer inventory can also be identified using DBS (Sales-> Vehicle Inventory, and filter by Open Campaign). - Refer to NPSB 15-460 for additional information - Please continue to check newly arriving inventory for campaign applicability. 2. Use the attached procedure to remedy vehicles affected by this quality action. 3. The service department should submit the applicable warranty claim for the action(s) performed so it can be closed on Service Comm and release the vehicle.
Associated Products (1)Associated Documents - April 3, 2018•Document ID: 10139405Service Bulletin/Repair InstructionsSTEERING
- Mfr Comm. #:
- NTB18-030
- Date Added:
- June 4, 2018
- Manufacturer:
- NISSAN
Summary2013 ? 2016 SENTRA; OIL RESIDUE FOUND ON STEERING COLUMN IF YOU CONFIRM Oil residue is found on the steering column assembly near the lower shaft assembly connection. ACTION Clean oil drip and residue from the steering column assembly per the SERVICE PROCEDURE on page 2. NOTE: Do NOT replace the Steering Column Assembly for this incident, if it should occur. IMPORTANT: The purpose of ACTION (above) is to give you a quick idea of the work you will be performing. You MUST closely follow the entire SERVICE PROCEDURE as it contains information that is essential to successfully completing this repair.
Associated Products (4)Associated Documents - March 26, 2018•Document ID: 10134856Service Bulletin/Repair InstructionsEQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
- Mfr Comm. #:
- NTB18-017a
- Date Added:
- April 23, 2018
- Manufacturer:
- NISSAN
SummaryNISSAN; SERVICE INFORMATION FOR DTCS B2EF0 AND B130C This bulletin applies only to vehicles equipped with Telematics. This bulletin has been amended. APPLIED VEHICLES was updated and a DTC listed in the SERVICE INFORMATION was corrected. No other changes have been made. Discard all previous versions of this bulletin.
Associated Products (23)2018 Nissan Altima2018 Nissan Armada2018 Nissan GT-R2018 Nissan Leaf2018 Nissan Maxima2018 Nissan Murano2018 Nissan Pathfinder2018 Nissan Rogue2018 Nissan Sentra2018 Nissan Titan2017 Nissan Altima2017 Nissan GT-R2017 Nissan Maxima2017 Nissan Murano2017 Nissan Pathfinder2017 Nissan Rogue2017 Nissan Sentra2017 Nissan Titan2016 Nissan Altima2016 Nissan Maxima+ 3 moreAssociated Documents - March 23, 2018•Document ID: 10134841Service Bulletin/Repair InstructionsWHEELS
- Mfr Comm. #:
- NTB11-044c
- Date Added:
- April 23, 2018
- Manufacturer:
- NISSAN
SummaryWHEEL BALANCING SERVICE INFORMATION This bulletin has been amended. The publication date has been revised to include the latest models and model years. No other changes have been made. Please discard previous versions of this bulletin.
Associated Products (144)2018 Nissan 370Z2018 Nissan Altima2018 Nissan Armada2018 Nissan Frontier2018 Nissan GT-R2018 Nissan Leaf2018 Nissan Maxima2018 Nissan Murano2018 Nissan Pathfinder2018 Nissan Rogue2018 Nissan Sentra2018 Nissan Titan2018 Nissan Versa2018 Nissan Versa Note2017 Nissan 370Z2017 Nissan Altima2017 Nissan Armada2017 Nissan Frontier2017 Nissan GT-R2017 Nissan Juke+ 124 moreAssociated Documents - February 27, 2018•Document ID: 10130503Service Bulletin/Repair InstructionsEQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL; POWER TRAIN
- Mfr Comm. #:
- NTB18-017
- Date Added:
- March 26, 2018
- Manufacturer:
- NISSAN
SummaryNISSAN; SERVICE INFORMATION FOR DTCS B2EF0 AND B130C This bulletin applies only to vehicles equipped with Telematics. SERVICE INFORMATION Diagnostic information in the Electronic Service Manuals (ESM) for the following DTCs may be missing or incorrect: -B2EF0 ? INTERNAL BATTERY (CIRC VOLT BELOW THRESHOLD) -B130C ? TCU (Telematics Control Unit) PAIRING ERROR If one of these DTCs is stored, follow the steps listed below along with the Electronic Service Manual (ESM) to compete the required repairs. DTC B2FE0 ? INTERNAL BATTERY (CIRC VOLT BELOW THRESHOLD): 1. Start the engine and let it idle for 30 minutes (to allow charging of the TCU internal battery). -2018 LEAF only: Put the vehicle in Ready to Drive mode (depress the brake pedal and depress the power [?ignition?] switch) for 30 minutes. 2. Verify the DTC can be erased. 3. If the DTC will not erase, replace the TCU. DTC B130C: 1. Collect all keys, and then re-register them to the vehicle. 2. Verify the DTC can be erased. 3. If the DTC will not erase, replace the TCU. NOTE: The related Electronic Service Manuals (ESM) will be updated at a later date. CLAIMS INFORMATION Refer to the current Nissan Warranty Flat Rate Manual and submit a claim for the repairs performed.
Associated Products (23)2018 Nissan Altima2018 Nissan Armada2018 Nissan GT-R2018 Nissan Leaf2018 Nissan Maxima2018 Nissan Murano2018 Nissan Pathfinder2018 Nissan Rogue2018 Nissan Sentra2018 Nissan Titan2017 Nissan Altima2017 Nissan GT-R2017 Nissan Maxima2017 Nissan Murano2017 Nissan Pathfinder2017 Nissan Rogue2017 Nissan Sentra2017 Nissan Titan2016 Nissan Altima2016 Nissan Maxima+ 3 moreAssociated Documents - February 26, 2018•Document ID: 10130493Service Bulletin/Repair InstructionsENGINE
- Mfr Comm. #:
- NTB17-104b
- Date Added:
- March 26, 2018
- Manufacturer:
- NISSAN
Summary2015 ? 2017 SENTRA; ENGINE TURNS OFF OR HESITATES WHEN ACCELERATING FROM A STOP DURING HOT AMBIENT TEMPERATURES (100°F OR MORE) This bulletin has been amended. Table A on page 4 has been revised, and additional information has been applied to step 7. No other changes have been made. Please discard previous versions of this bulletin.
Associated Products (3)Associated Documents - February 16, 2018•Document ID: 10130490Service Bulletin/Repair InstructionsEQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
- Mfr Comm. #:
- NTB15-049o
- Date Added:
- March 26, 2018
- Manufacturer:
- NISSAN
SummaryTELEMATICS SERVICE INFORMATION This bulletin applies only to vehicles equipped with a Telematics Communication Unit (TCU). This bulletin has been amended. Changes have been made throughout. It is necessary to read the revised procedure(s) in entirety to properly perform the action(s). Please discard previous versions of this bulletin.
Associated Products (23)2018 Nissan Altima2018 Nissan Armada2018 Nissan GT-R2018 Nissan Leaf2018 Nissan Maxima2018 Nissan Murano2018 Nissan Pathfinder2018 Nissan Rogue2018 Nissan Sentra2018 Nissan Titan2017 Nissan Altima2017 Nissan GT-R2017 Nissan Maxima2017 Nissan Murano2017 Nissan Pathfinder2017 Nissan Rogue2017 Nissan Sentra2017 Nissan Titan2016 Nissan Altima2016 Nissan Maxima+ 3 moreAssociated Documents - February 2, 2018•Document ID: 10130489Service Bulletin/Repair InstructionsSTRUCTURE
- Mfr Comm. #:
- NTB15-037e
- Date Added:
- March 26, 2018
- Manufacturer:
- NISSAN
SummaryVERSA SEDAN, VERSA NOTE, AND SENTRA; CVT VALVE BODY REPLACEMENT WITH CONFIRMED DTC This bulletin has been amended. Additional model years were added on pages 1, 3, 7, 15, and 39. Other minor changes were made on page 19, 20, 34, and 38. Please discard all previous versions of this bulletin.
Associated Products (15)Associated Documents - February 1, 2018•Document ID: 10130496Service Bulletin/Repair InstructionsEQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
- Mfr Comm. #:
- NTB18-008
- Date Added:
- March 26, 2018
- Manufacturer:
- NISSAN
SummaryADAS SYSTEM DTC C1A03, C1A04, AND/OR C1B01 SERVICE INFORMATION This bulletin applies only to vehicles equipped with Automatic Emergency Braking (AEB) or Forward Emergency Braking (FEB). SERVICE INFORMATION If the following ICC/ADAS codes are stored, make sure to follow the diagnostic procedures in the Electronic Service Manual (ESM) before replacing any parts. C1A03 ? VEHICLE SPEED SENSOR -The diagnostic procedure in the ESM includes check and, if needed, repair for ABS DTCs before replacing ADAS components. -If repairs are performed for the ABS system; when compete, perform DTC Confirmation Procedure again before doing any additional repairs. C1A04 ? ABS/TCS/VDC SYSTEM -The diagnostic procedure in the ESM includes check and, if needed, repair for ABS DTCs before replacing ADAS components. -If repairs are performed for the ABS system; when compete, perform DTC Confirmation Procedure again before doing any additional repairs. C1B01 CAM AIMING INCMP -The diagnostic procedure in the ESM includes check and, if needed, repair for LANE CAMERA DTCs before replacing ADAS components. -LANE CAMERA DTC may require adjustment of the lane camera. -If repairs/adjustments are performed for the Lane Camera; when compete, perform DTC Confirmation Procedure again before doing any additional repairs.
Associated Products (14)Associated Documents - February 1, 2018•Document ID: 10130492Service Bulletin/Repair InstructionsPOWER TRAIN
- Mfr Comm. #:
- NTB17-034e
- Date Added:
- March 26, 2018
- Manufacturer:
- NISSAN
Summary2013-2017 SENTRA AND VERSA SEDAN, AND 2014-2017 VERSA NOTE; CVT JUDDER AND/OR P0746/P0965 STORED This bulletin applies only to vehicles equipped with a Continuously Variable Transmission (CVT). This bulletin has been amended to add model years to Applied Vehicle, update Table B and make changes to page 116. No other changes were made. Please discard previous versions of this bulletin.
Associated Products (14)Associated Documents - January 12, 2018•Document ID: 10130686Service Bulletin/Repair InstructionsFUEL SYSTEM, GASOLINE; EQUIPMENT
- Mfr Comm. #:
- NTB18-001
- Date Added:
- April 2, 2018
- Manufacturer:
- NISSAN
Summary2017 SENTRA; MIL ON WITH DTC P00FE AND/OR FUEL GAUGE DOES NOT SHOW FULL AFTER FILLING IF YOU CONFIRM Fuel gauge does not show FULL after filling with fuel. AND/OR DTC P00FE EVAP CONTROL SYSTEM is stored. ACTION Replace the fuel tank with the new one listed in the PARTS INFORMATION section of this bulletin. - Refer to the Electronic Service Manual (ESM), section FE ? FUEL SYSTEM.
Associated Products (1)Associated Documents - January 5, 2018•Document ID: 10128641Service Bulletin/Repair InstructionsPOWER TRAIN:AUTOMATIC TRANSMISSION; POWER TRAIN:AXLE ASSEMBLY
- Mfr Comm. #:
- NTB17-041a
- Date Added:
- February 12, 2018
- Manufacturer:
- NISSAN
SummaryADDITIONAL SERVICE WHEN REPLACING CONTROL VALVE OR TRANSAXLE ASSEMBLY This bulletin applies to vehicles equipped with a CVT (Continuously Variable Transmission). This bulletin has been amended. Changes have been made throughout. It is necessary for you to read this revised procedure to properly perform this action. Please discard all previous versions of this bulletin.
Associated Products (14)Associated Documents - January 4, 2018•Document ID: 10128640Service Bulletin/Repair InstructionsEQUIPMENT
- Mfr Comm. #:
- NTB15-049n
- Date Added:
- February 12, 2018
- Manufacturer:
- NISSAN
SummaryTELEMATICS SERVICE INFORMATION This bulletin applies to vehicles equipped with a TCU (Telematics Communication Unit). This bulletin has been amended. A correction was made to the Service Procedure on page 23. No other changes were made. Please discard previous versions of this bulletin.
Associated Products (22)2018 Nissan Altima2018 Nissan Armada2018 Nissan GT-R2018 Nissan Maxima2018 Nissan Murano2018 Nissan Pathfinder2018 Nissan Rogue2018 Nissan Sentra2018 Nissan Titan2017 Nissan Altima2017 Nissan GT-R2017 Nissan Maxima2017 Nissan Murano2017 Nissan Pathfinder2017 Nissan Rogue2017 Nissan Sentra2017 Nissan Titan2016 Nissan Altima2016 Nissan Maxima2016 Nissan Rogue+ 2 moreAssociated Documents - December 11, 2017•Document ID: 10127453Service Bulletin/Repair InstructionsENGINE
- Mfr Comm. #:
- NTB17-123
- Date Added:
- January 29, 2018
- Manufacturer:
- NISSAN
Summary2018 ALTIMA AND SENTRA; DO NOT ERASE DTC P0315 This bulletin applies to vehicles equipped with a 4-cyl (non-turbo) engine only. SERVICE INFORMATION If DTC P0315 is stored on an Applied Vehicle, do not erase it. If DTC P0315 is stored, the description on the CONSULT-III plus screen will be listed as: (TBD) Crankshaft Position System Variation Not Learned. If you find DTC P0315 stored, please note the following: - Do not erase the DTC. - It will not turn ON the MIL. - No diagnosis or repair is necessary. - It will clear itself after a few trips with normal operation of the vehicle. NOTE: If DTC P0315 is erased with C-III plus, the ECM will restart the learning pattern: - The DTC may be stored again before the learning/driving pattern is complete. - The MIL will not come ON. - The DTC will clear itself after a few trips with normal operation of the vehicle.
Associated Products (2)Associated Documents - November 20, 2017•Document ID: 10126257Service Bulletin/Repair InstructionsPOWER TRAIN
- Mfr Comm. #:
- NTB17-034d
- Date Added:
- December 22, 2017
- Manufacturer:
- NISSAN
Summary2014-2017 SENTRA AND VERSA SEDAN, AND 2015-2017 VERSA NOTE; CVT JUDDER AND/OR P0746/P0965 STORED This bulletin applies to vehicles equipped with a Continuously Variable Transmission (CVT). This bulletin has been amended to update Table B and make changes to pages 2, 6, 9 and 10. Please discard previous versions of this bulletin.
Associated Products (11)Associated Documents - November 14, 2017•Document ID: 10126254Service Bulletin/Repair InstructionsEQUIPMENT:ELECTRICAL
- Mfr Comm. #:
- NTB15-049m
- Date Added:
- December 22, 2017
- Manufacturer:
- NISSAN
SummaryTELEMATICS SERVICE INFORMATION This bulletin applies to vehicles that are equipped with a wireless communication device called a Telematics Communication Unit (TCU). This bulletin has been amended. Changes have been made throughout. You must read the entire bulletin to understand all the changed information. Please discard previous versions of this bulletin.
Associated Products (22)2018 Nissan Altima2018 Nissan Armada2018 Nissan GT-R2018 Nissan Maxima2018 Nissan Murano2018 Nissan Pathfinder2018 Nissan Rogue2018 Nissan Sentra2018 Nissan Titan2017 Nissan Altima2017 Nissan GT-R2017 Nissan Maxima2017 Nissan Murano2017 Nissan Pathfinder2017 Nissan Rogue2017 Nissan Sentra2017 Nissan Titan2016 Nissan Altima2016 Nissan Maxima2016 Nissan Rogue+ 2 moreAssociated Documents - October 13, 2017•Document ID: 10123359Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- PM700
- Date Added:
- November 14, 2017
- Manufacturer:
- NISSAN
SummaryRadiator Fan Dealer Inventory *****Dealer Announcement***** Nissan is conducting a quality action to inspect the date code on the cooling fan blade and, if necessary, replace the cooling fan shroud and motor assembly on 159 specific 2017 Sentra vehicles. Affected vehicles are not subject to stop sale and are either currently in dealer inventory or assigned and in transit to the dealer. Nissan requests dealers to inspect and, if necessary, remedy the affected vehicles prior to sale to help ensure customer satisfaction. *****What Dealers Should Do***** 1. Verify if vehicles currently in new dealer inventory are affected by this quality action using Service Comm or DBS National Service History ? Open Campaign I.D. PM700 - New vehicles in dealer inventory can also be identified using DBS (Sales-> Vehicle Inventory, and filter by Open Campaign). - Refer to NPSB 15-460 for additional information - Please continue to check newly arriving inventory for campaign applicability. 2. Use the attached procedure to inspect the vehicle and, if necessary, repair. 3. The service department should submit the applicable warranty claim for the action(s) performed so it can be closed on Service Comm and release the vehicle. ***** Dealer Responsibility ***** It is the dealer?s responsibility to check Service Comm or DBS National Service History - Open Campaign using the appropriate campaign I.D for the inspection status on each affected vehicle currently in new vehicle inventory. Nissan requests dealers to perform this repair on new vehicles in inventory prior to being retailed to help ensure customer satisfaction.
Associated Products (1)Associated Documents - October 13, 2017•Document ID: 10123345Service Bulletin/Repair InstructionsPOWER TRAIN
- Mfr Comm. #:
- NTB14-118c
- Date Added:
- November 14, 2017
- Manufacturer:
- NISSAN
SummaryJUDDER ON DECELERATION UNDER 15 MPH This bulletin applies to vehicles equipped with a Continuously Variable Transmission (CVT). This bulletin has been superseded by NTB17-034. 2014-2017 SENTRA AND VERSA SEDAN, AND 2015-2017 VERSA NOTE; CVT JUDDER AND/OR P0746/P0965 STORED Please discard previous versions of this bulletin.
Associated Products (4)Associated Documents