Nissan Rogue Service Bulletins (2016)
323 manufacturer communications on file.
- December 9, 2016•Document ID: 10109117Service Bulletin/Repair InstructionsPOWER TRAIN; ELECTRICAL SYSTEM:SOFTWARE; POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM)
- Mfr Comm. #:
- PC490 - 2013-16
- Date Added:
- August 1, 2017
- Manufacturer:
- NISSAN
SummaryCVT Reprogramming Voluntary Service Campaign ***** Campaign Summary***** Nissan is conducting a voluntary service campaign on approximately 1,657,666 specific MY2013-16 Altima (L33) and MY2014-16 Rogue (T32) vehicles to reprogram the Continuously Variable Transmission (CVT) software. Under specific driving conditions, hydraulic pressure may decrease and result in belt slip within the CVT. This may result in MIL illumination (P0776) and poor acceleration in some vehicles. There is no safety concern due to built-in fail-safe logic. Nissan is proactively reprogramming the CVT to prevent durability concerns and high out of warranty repair costs for owners. ***** What Dealers Should Do ***** 1. Verify if vehicles are affected by this Voluntary Service Campaign using Service Comm I.D. PC490. 2. Dealers are requested to repair any affected vehicles in dealer new or pre-owned inventory to ensure customer satisfaction. 3. Dealers should use NTB16-121 to correct any vehicles subject to this campaign. 4. Once repaired, dealers should submit the claim, using the claims coding provided, and release the vehicle.
Associated Products (7)Associated Documents - December 8, 2016•Document ID: 10109112Service Bulletin/Repair InstructionsPOWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM); ELECTRICAL SYSTEM:SOFTWARE
- Mfr Comm. #:
- NTB16-121
- Date Added:
- August 1, 2017
- Manufacturer:
- NISSAN
SummaryVOLUNTARY SERVICE CAMPAIGN 2013-2016 ALTIMA AND 2014-2016 ROGUE; TCM REPROGRAMMING INTRODUCTION Nissan is conducting this voluntary service campaign to reprogram the Transmission Control Module (TCM) for the transmission on certain specific 2013-2016 Altima and 2014-2016 Rogue vehicles. This TCM reprogram will be performed at no charge for parts or labor. IDENTIFICATION NUMBER Nissan has assigned identification number PC490 to this campaign. This number must appear on all communications and documentation of any nature dealing with this campaign. DEALER RESPONSIBILITY Dealers are to repair vehicles falling within range of this campaign that enter the service department. This includes vehicles purchased from private parties, vehicles presented by transient (tourists) owners, and vehicles in a dealer?s inventory.
Associated Products (7)Associated Documents - November 30, 2016•Document ID: 10120596Service Bulletin/Repair InstructionsELECTRICAL SYSTEM:SOFTWARE
- Mfr Comm. #:
- NTB16-100
- Date Added:
- October 25, 2017
- Manufacturer:
- NISSAN
Summary20162016 NISSAN CONNECT NAVIGATION SYSTEM SOFTWARE UPDATE IF YOU CONFIRM: One or more of the following: - A status message ?Voice Recognition is initializing, please wait? is displayed when pressing the voice recognition button 2-3 minutes after the ignition is first turned ON. NOTE: If the message is displayed within the first 2-3 minutes this is normal. The voice recognition is loading phonebook contacts into its system. - A loud booming noise is emitted from the vehicle?s speaker while connected on a Bluetooth hands-free phone call. - The buttons on the navigation unit intermittently flicker. This is particularly noticeable at night when the buttons are illuminated. - Display night illumination is not automatically detected by the navigation unit. The center display screen illumination does not change at night when it is dark. - The navigation unit reboots (Nissan logo appears after loss of sound) only while listening to XM radio. And - The Software version has been confirmed as ?not current? (refer to page 3). ACTION: Perform the SERVICE PROCEDURE starting on page 2 and reprogram the Navigation system with USB memory stick listed on page 2.
Associated Products (2)Associated Documents - November 29, 2016•Document ID: 10119266Service Bulletin/Repair InstructionsENGINE
- Mfr Comm. #:
- NTB13-107a
- Date Added:
- October 15, 2017
- Manufacturer:
- NISSAN
SummaryINTELLIGENT KEY NOT DETECTED / ENGINE WILL NOT START This bulletin has been amended to update the Applied Vehicles and make changes to the body of the bulletin. Please discard previous versions.
Associated Products (21)2017 Nissan Altima2017 Nissan Maxima2017 Nissan Murano2017 Nissan Pathfinder2017 Nissan Rogue2017 Nissan Titan2016 Nissan Altima2016 Nissan Maxima2016 Nissan Murano2016 Nissan Pathfinder2016 Nissan Rogue2016 Nissan Titan2015 Nissan Altima2015 Nissan Murano2015 Nissan Pathfinder2015 Nissan Rogue2014 Nissan Altima2014 Nissan Pathfinder2014 Nissan Rogue2013 Nissan Altima+ 1 moreAssociated Documents - November 28, 2016•Document ID: 10119282Service Bulletin/Repair InstructionsENGINE
- Mfr Comm. #:
- NTB16-116
- Date Added:
- October 15, 2017
- Manufacturer:
- NISSAN
SummaryNISSAN; DIAGNOSIS INFORMATION FOR ABS DTC C1130 SERVICE INFORMATION When diagnosing for DTC C1130 (ENGINE SIGNAL): ECM related DTCs (P-codes) must be diagnosed, repaired, and DTCs erased first. - DTC C1130 is an ABS DTC that indicates an output signal of the ECM is not recognized. - Absent or incorrect ECM signals, that are indicated by corresponding P-codes, may trigger C1130 in the ABS control unit. - Some vehicle features that can be affected by absent or incorrect ECM signals are: - Forward Emergency Braking (FEB) - Intelligent Cruise Control (ICC) - VDC/ABS/TCS
Associated Products (86)2017 Nissan 370Z2017 Nissan Altima2017 Nissan Armada2017 Nissan Frontier2017 Nissan Juke2017 Nissan Maxima2017 Nissan Murano2017 Nissan Pathfinder2017 Nissan Quest2017 Nissan Rogue2017 Nissan Sentra2017 Nissan Titan2017 Nissan Versa2017 Nissan Versa Note2016 Nissan 370Z2016 Nissan Altima2016 Nissan Frontier2016 Nissan Juke2016 Nissan Maxima2016 Nissan Murano+ 66 moreAssociated Documents - November 15, 2016•Document ID: 10119268Service Bulletin/Repair InstructionsEQUIPMENT ADAPTIVE/MOBILITY
- Mfr Comm. #:
- NTB15-045d
- Date Added:
- October 15, 2017
- Manufacturer:
- NISSAN
Summary2014-2017 ROGUE; MANUAL HVAC IMPROPER OPERATION This bulletin has been amended. Changes have been made throughout. Please discard all previous versions.
Associated Products (4)Associated Documents - November 14, 2016•Document ID: 10119276Service Bulletin/Repair InstructionsEQUIPMENT ADAPTIVE/MOBILITY
- Mfr Comm. #:
- NTB15-086e
- Date Added:
- October 15, 2017
- Manufacturer:
- NISSAN
Summary2013-2014 ALTIMA AND 2014-2016 ROGUE; MIL ON WITH DTC P0776, P1715 MAY HAVE HESITATION AND/OR LACK OF POWER This bulletin has been amended to remove 2015-2016 Altima from the Applied Vehicles. Please discard previous versions of this bulletin.
Associated Products (5)Associated Documents - November 14, 2016•Document ID: 10119274Service Bulletin/Repair InstructionsENGINE
- Mfr Comm. #:
- NTB15-049j
- Date Added:
- October 15, 2017
- Manufacturer:
- NISSAN
SummaryTELEMATICS SERVICE INFORMATION This bulletin has been amended. Information for 2017 Rogue and Rogue Hybrid has been applied. No other changes have been made. Please discard previous versions of this bulletin.
Associated Products (13)Associated Documents - October 26, 2016•Document ID: 10109121Service Bulletin/Repair InstructionsSUSPENSION; SUSPENSION:FRONT:SPRINGS:COIL SPRINGS
- Mfr Comm. #:
- NTB15-062b
- Date Added:
- August 1, 2017
- Manufacturer:
- NISSAN
Summary2014-2016 ROGUE; POPPING NOISE FROM FRONT SUSPENSION WHEN TURNING This bulletin has been amended throughout. Discard all previous versions of this bulletin.
Associated Products (3)Associated Documents - October 21, 2016•Document ID: 10120586Service Bulletin/Repair InstructionsEQUIPMENT ADAPTIVE/MOBILITY
- Mfr Comm. #:
- NTB13-077b
- Date Added:
- October 25, 2017
- Manufacturer:
- NISSAN
SummaryCVT FLUID LEVEL CHECK SERVICE INFORMATION This bulletin has been amended. The APPLIED VEHICLES section has been revised. No other changes have been made. Please discard all previous versions of this bulletin.
Associated Products (33)2017 Nissan Altima2017 Nissan Maxima2017 Nissan Murano2017 Nissan Pathfinder2017 Nissan Sentra2017 Nissan Versa2017 Nissan Versa Note2016 Nissan Altima2016 Nissan Maxima2016 Nissan Murano2016 Nissan Pathfinder2016 Nissan Rogue2016 Nissan Sentra2016 Nissan Versa2016 Nissan Versa Note2015 Nissan Altima2015 Nissan Murano2015 Nissan Pathfinder2015 Nissan Rogue2015 Nissan Sentra+ 13 moreAssociated Documents - October 10, 2016•Document ID: 10120589Service Bulletin/Repair InstructionsEQUIPMENT ADAPTIVE/MOBILITY
- Mfr Comm. #:
- NTB15-049i
- Date Added:
- October 25, 2017
- Manufacturer:
- NISSAN
SummaryTELEMATICS SERVICE INFORMATION ONLY SPECIFIC TRIM PACKAGES ARE AFFECTED This bulletin has been amended. Information for 2017 Altima, Murano, Pathfinder, Sentra, and Titan/Titan XD vehicles has been applied. No other changes have been made. Please discard previous versions of this bulletin.
Associated Products (12)Associated Documents - September 27, 2016•Document ID: 10091608Service Bulletin/Repair InstructionsLATCHES/LOCKS/LINKAGES:DOORS:LATCH
- Mfr Comm. #:
- NTB16-092
- Date Added:
- February 14, 2017
- Manufacturer:
- NISSAN
Summary"NISSAN; DOORS DIFFICULT TO CLOSE WITH TEMPERATURE BELOW FREEZING IF YOU CONFIRM: THE FOLLOWING INCIDENT, OR THE CUSTOMER REPORTS THIS INCIDENT: - THE VEHICLE HAS BEEN SETTING (NOT RUNNING) IN TEMPERATURES BELOW 14°F (-10°C) FOR AN EXTENDED PERIOD (SUCH AS OVERNIGHT). THEN - A SIDE DOOR IS OPENED. THEN - THE DOOR IS DIFFICULT TO CLOSE/LATCH, WILL NOT CLOSE/LATCH WITH NORMAL PRESSURE; REQUIRES ADDITIONAL EFFORT TO CLOSE/LATCH, OR THE DOOR MAY ONLY LATCH HALF WAY. THEN - THE DOOR WILL CLOSE/LATCH NORMALLY WHEN THE VEHICLE HAS WARMED UP (VEHICLE LEFT IN THE SUN, MOVED INDOORS, OR DRIVEN FOR SEVERAL MINUTES). NOTE: O THE ABOVE INCIDENT DOES NOT APPLY TO SLIDING SIDE DOORS OR A REAR HATCH (BACK DOOR). O THE ABOVE INCIDENT, IF IT SHOULD OCCUR, COULD BE CONFIRMED OR REPORTED FOR ONE OR MORE SIDE DOORS. ACTION REPLACE THE DOOR LOCK FOR THE AFFECTED DOOR. - DO NOT REPLACE ALL SIDE DOOR LOCKS AUTOMATICALLY. REPLACE ONLY THE DOOR LOCK OF THE DOOR(S) WITH THE INCIDENT AS DESCRIBED UNDER IF YOU CONFIRM. - REFER TO THE ELECTRONIC SERVICE MANUAL (ESM), SECTION DLK DOOR & LOCK FOR REPLACEMENT PROCEDURE."
Associated Products (25)2016 Nissan Altima2016 Nissan Leaf2016 Nissan NV2002016 Nissan Pathfinder2016 Nissan Rogue2016 Nissan Sentra2016 Nissan Versa Note2015 Nissan Altima2015 Nissan Leaf2015 Nissan NV2002015 Nissan Pathfinder2015 Nissan Rogue2015 Nissan Sentra2015 Nissan Versa Note2014 Nissan Altima2014 Nissan Leaf2014 Nissan NV2002014 Nissan Pathfinder2014 Nissan Rogue2014 Nissan Sentra+ 5 moreAssociated Documents - September 6, 2016•Document ID: 10091586Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL
- Mfr Comm. #:
- NTB15-099B
- Date Added:
- February 14, 2017
- Manufacturer:
- NISSAN
Summary"SERVICE INFORMATION FOR DTCS C1A12 AND C1A16 THIS BULLETIN HAS BEEN AMENDED. THE APPLIED VEHICLES SECTION HAS BEEN REVISED, A PHOTO HAS BEEN ADDED TO PAGE 4, AND ICC/DISTANCE SENSOR LOCATION INFORMATION FOR MAXIMA AND ROGUE HAS BEEN ADJUSTED. NO OTHER CHANGES HAVE BEEN MADE. PLEASE DISCARD PREVIOUS VERSIONS OF THIS BULLETIN."
Associated Products (7)Associated Documents - August 11, 2016•Document ID: 10091505Service Bulletin/Repair InstructionsEQUIPMENT:APPLIANCE:AIR CONDITIONER
- Mfr Comm. #:
- NTB15-045C
- Date Added:
- February 14, 2017
- Manufacturer:
- NISSAN
Summary"2014-2016 ROGUE; MANUAL HVAC IMPROPER OPERATION MANUAL HVAC SYSTEM ONLY IF YOU CONFIRM THERE ARE NO HVAC DTCS STORED, AND ONE OF THE FOLLOWING CONDITIONS IS OCCURRING: - AIR TEMPERATURE FROM THE HVAC VENTS DOES NOT MATCH THE TEMPERATURE SETTING (WARM AIR IS DISCHARGED WHEN COLD IS SELECTED, OR VICE VERSA). OR - AIR IS DISCHARGED FROM THE INCORRECT LOCATION. FOR EXAMPLE, VENT IS SELECTED BUT 100% OF AIR IS DISCHARGED TO THE FOOT OR DEFROST. NOTE: IF HVAC DTC(S) ARE STORED, THIS BULLETIN DOES NOT APPLY. REFER TO THE ELECTRONIC SERVICE MANUAL FOR FURTHER INFORMATION. ACTION USE CONSULT-III PLUS (C-III PLUS) TO PERFORM DOOR MOTOR STARTING POSITION RESET."
Associated Products (3)Associated Documents - August 9, 2016•Document ID: 10091513Service Bulletin/Repair InstructionsBACK OVER PREVENTION: CAMERA SYSTEM
- Mfr Comm. #:
- NTB16-077
- Date Added:
- February 14, 2017
- Manufacturer:
- NISSAN
Summary"2016 MURANO, ROGUE AND PATHFINDER; AROUND VIEW MONITOR MIRROR CAMERA INOPERATIVE IF YOU CONFIRM - EITHER THE LEFT OR RIGHT AROUND VIEW MONITOR DOOR MIRROR CAMERA IS INOPERATIVE. NOTE: THE FOLLOWING DTCS MAY ALSO BE PRESENT: - U111B (SIDE CAMERA LH IMAGE SIGNAL CIRCUIT) DTC IS STORED. AND/OR - U111D (SIDE CAMERA RH IMAGE SIGNAL CIRCUIT) DTC IS STORED. ACTION CHECK THE SIDE CAMERA HARNESS CONNECTION BETWEEN THE SIDE CAMERA AND THE MIRROR HARNESS LOCATED INSIDE THE INOPERATIVE DOOR MIRROR. - IF THE HARNESS CONNECTOR IS NOT LATCHED (CAN BE DISCONNECTED BY A GENTLE TUG), SEAT THE CONNECTOR, CLEAR THE DTC AND RETEST. - IF THE HARNESS CONNECTOR IS LATCHED (CANNOT BE DISCONNECTED BY A GENTLE TUG) REFER TO THE ELECTRONIC SERVICE MANUAL (ESM) FOR FURTHER DIAGNOSTIC INFORMATION. NOTE: IF A SIDE CAMERA REQUIRES REPLACEMENT, DO NOT REPLACE THE ENTIRE MIRROR, REPLACE ONLY THE SIDE CAMERA."
Associated Products (3)Associated Documents - August 9, 2016•Document ID: 10091506Service Bulletin/Repair InstructionsPOWER TRAIN:AUTOMATIC TRANSMISSION
- Mfr Comm. #:
- NTB15-086D
- Date Added:
- February 14, 2017
- Manufacturer:
- NISSAN
Summary"2013-2016 ALTIMA AND 2014-2016 ROGUE; MIL ON WITH DTC P0776, P1715 MAY HAVE HESITATION AND/OR LACK OF POWER ALTIMA WITH 4-CYLINDER ENGINE ONLY THIS BULLETIN HAS BEEN AMENDED. THE TITLE IS CHANGED, A DTC IS ADDED UNDER IF YOU CONFIRM, AND TCM REPROGRAMMING IS ADDED TO THE SERVICE PROCEDURE. PLEASE DISCARD PREVIOUS VERSIONS OF THIS BULLETIN."
Associated Products (8)Associated Documents - August 4, 2016•Document ID: 10091503Service Bulletin/Repair InstructionsEQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
- Mfr Comm. #:
- NTB13-097D
- Date Added:
- February 14, 2017
- Manufacturer:
- NISSAN
Summary"ALL MODEL YEAR 2012 AND NEWER NISSAN VEHICLES; EVAP LEAK DTC P0442, P0455, P0456 INFORMATION THIS BULLETIN HAS BEEN AMENDED. THE TITLE HAS BEEN REVISED, AND THE BULLETIN NOW INCLUDES VEHICLES IN PRODUCTION AS OF THE DATE OF THIS UPDATE. NO OTHER CHANGES HAVE BEEN MADE. PLEASE DISCARD ALL PREVIOUS VERSIONS OF THIS BULLETIN."
Associated Products (104)2017 Nissan Altima2017 Nissan Armada2017 Nissan Leaf2017 Nissan Maxima2017 Nissan Murano2017 Nissan Pathfinder2017 Nissan Rogue2017 Nissan Titan2017 Nissan Versa2016 Nissan 370Z2016 Nissan Altima2016 Nissan Armada2016 Nissan Cube2016 Nissan Frontier2016 Nissan GT-R2016 Nissan Juke2016 Nissan Leaf2016 Nissan Maxima2016 Nissan Murano2016 Nissan NV+ 84 moreAssociated Documents - July 22, 2016•Document ID: 10091409Service Bulletin/Repair InstructionsELECTRICAL SYSTEM:IGNITION
- Mfr Comm. #:
- NTB09-118D
- Date Added:
- February 13, 2017
- Manufacturer:
- NISSAN
Summary"INTELLIGENT KEY BATTERY VOLTAGE CHECK AND REPLACEMENT THIS BULLETIN HAS BEEN SUPERSEDED BY NTB15-077. NISSAN; SIGNAL TECH-II INTELLIGENT KEY BATTERY TEST AND SIGNAL CHECK PLEASE DISCARD PREVIOUS VERSIONS OF THIS BULLETIN."
Associated Products (12)Associated Documents - July 12, 2016•Document ID: 10091417Service Bulletin/Repair InstructionsELECTRICAL SYSTEM:12V/24V/48V BATTERY
- Mfr Comm. #:
- NTB15-077A
- Date Added:
- February 13, 2017
- Manufacturer:
- NISSAN
Summary"NISSAN; SIGNAL TECH-II INTELLIGENT KEY BATTERY TEST AND SIGNAL CHECK THIS BULLETIN HAS BEEN AMENDED. CHANGES HAVE BEEN MADE THROUGHOUT. PLEASE DISCARD PREVIOUS VERSIONS OF THIS BULLETIN. IF YOU CONFIRM THE INTELLIGENT KEY INTERMITTENTLY OR CONTINUOUSLY DOES NOT FUNCTION. ACTION CHECK THE BATTERY CONDITION WITH THE SIGNAL TECH-II I-KEY BATTERY TEST. IMPORTANT: CONFIRM THAT THE SIGNAL TECH-II HAS THE MOST RECENT UPDATE. UPDATE CAN BE PERFORMED THROUGH ASIST / SPECIALTY TOOLS / SIGNAL TECH-II."
Associated Products (12)Associated Documents - July 12, 2016•Document ID: 10091415Service Bulletin/Repair InstructionsEQUIPMENT
- Mfr Comm. #:
- NTB14-024C
- Date Added:
- February 13, 2017
- Manufacturer:
- NISSAN
Summary"20162014-2016 ROGUE; IPDM CONFIGURATION AFTER UNIT REPLACEMENT THIS BULLETIN HAS BEEN AMENDED. TWO PART NUMBER TABLES, AND SYMPTOMS THAT COULD OCCUR IF THE IPDM IS NOT CONFIGURED HAVE BEEN ADDED, AND THE APPLIED VEHICLES SECTION HAS BEEN REVISED. PLEASE DISCARD PREVIOUS VERSIONS OF THIS BULLETIN. SERVICE INFORMATION AFTER REPLACING AN IPDM IN AN APPLIED VEHICLE, THE IPDM ECU PART NUMBER MUST BE SELECTED FOR PROPER FUNCTION. USE CONSULT-III PLUS (C-III PLUS) THROUGH MANUAL CONFIGURATION TO DO THIS. THE SETTING IS BASED ON THE VEHICLE OPTIONS (SEE TABLE A, B OR C ON PAGE 2 FOR VEHICLE OPTIONS). -THE IPDM E/R PART NUMBER IS EXTERNALLY MARKED ON ALL IPDM E/R CASES AND DOES NOT INDICATE WHAT IT IS CONFIGURED AS. -ONCE CONFIGURED, THE CONFIGURED NUMBER CAN ONLY BE READ THROUGH READ / WRITE CONFIGURATION. -IPDM E/R CONFIGURATION CANNOT BE READ THROUGH WORK SUPPORT / ECU IDENTIFICATION AND WILL ONLY SHOW THE PART NUMBER THAT IS MARKED ON THE OUTSIDE OF THE CASE. -THE VEHICLE WILL NOT START UNTIL THE IPDM IS CONFIGURED. IF THE IPDM IS CONFIGURED INCORRECTLY FOR THE VEHICLES OPTIONS, THE SYMPTOMS SHOWN BELOW MAY OCCUR."
Associated Products (3)Associated Documents