Lexus LX Service Bulletins (2022)
54 manufacturer communications on file.
- February 7, 2025•Document ID: 11015489Service Bulletin/Repair InstructionsSTRUCTURE:BODY
- Mfr Comm. #:
- L-SB-0017-19 Rev1
- Date Added:
- March 11, 2025
- Manufacturer:
- LEXUS
SummarySome 2010 – 2026 model year Lexus vehicles may exhibit paint stains after the removal of Rapgard™. The paint stains may appear to be under the clear coat but are usually under wrinkles in the Rapgard™. The wrinkles may trap water and cause the paint to stain from the trapped moisture, especially on horizontal surfaces such as the hood, roof, and trunk.
Associated Products (51)Associated Documents - January 30, 2025•Document ID: 11014220Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- L-SB-0021-23 Rev2
- Date Added:
- February 12, 2025
- Manufacturer:
- LEXUS
SummarySome 2022 – 2025 model year Lexus vehicles may require the download and installation of vehicle specific software or configuration software when the Electronic Control Unit (ECU) is replaced. GTS+ software has been modified to indicate when configuration software is required. A new Configure column has been added to the GTS+ Health Check Results screen to show when configuration software is available for a specific ECU.
Associated Products (18)Associated Documents - January 28, 2025•Document ID: 11014206Service Bulletin/Repair InstructionsENGINE
- Mfr Comm. #:
- L-SB-0007-25
- Date Added:
- February 12, 2025
- Manufacturer:
- LEXUS
SummarySome 2022 – 2024 model year LX 600 vehicles may exhibit a MIL ON condition with one or more of the following Diagnostic Trouble Codes (DTCs) present: •P030000 – Random/Multiple Cylinder Misfire Detected •P030027 – Random/Multiple Cylinder Misfire Detected (Emission) Signal Rate of Change Above Threshold •P030085 – Random/Multiple Cylinder Misfire Detected (Over Temperature) Signal Above Allowable Range The Engine Control Module (ECM) (SAE term: Powertrain Control Module / PCM) logic has been modified to address this condition.
Associated Products (3)Associated Documents - January 24, 2025•Document ID: 11014197Service CampaignENGINE
- Mfr Comm. #:
- 24LC04
- Date Added:
- February 12, 2025
- Manufacturer:
- LEXUS
SummarySPECIAL SERVICE CAMPAIGN 24LC04 Certain 2022-2024 Model Year Lexus LX600 Engine Electronic Control Unit (ECU) Reprogram Frequently Asked Questions
Associated Products (3)Associated Documents - January 24, 2025•Document ID: 11014196Service Bulletin/Repair InstructionsENGINE
- Mfr Comm. #:
- 24LC04
- Date Added:
- February 12, 2025
- Manufacturer:
- LEXUS
SummaryTECHNICAL INSTRUCTIONS FOR SPECIAL SERVICE CAMPAIGN 24LC04 REPROGRAMMING FOR ENGINE ELECTRONIC CONTROL UNIT CERTAIN 2022, 2023 and 2024 LX600 VEHICLES
Associated Products (3)Associated Documents - January 24, 2025•Document ID: 11014195Service CampaignENGINE
- Mfr Comm. #:
- 24LC04
- Date Added:
- February 12, 2025
- Manufacturer:
- LEXUS
SummaryLexus provided certain specifications for horsepower when the LX600 was introduced into the market. It was recently discovered that these vehicles may have a horsepower rating lower than those specifications.
Associated Products (3)Associated Documents - January 24, 2025•Document ID: 11014194Service CampaignENGINE
- Mfr Comm. #:
- 24LC04
- Date Added:
- February 12, 2025
- Manufacturer:
- LEXUS
SummaryLexus provided certain specifications for horsepower when the LX600 was introduced into the market. It was recently discovered that these vehicles may have a horsepower rating lower than those specifications.
Associated Products (3)Associated Documents - October 8, 2024•Document ID: 11010335Service Bulletin/Repair InstructionsSERVICE BRAKES
- Mfr Comm. #:
- L-SB-0036-24
- Date Added:
- November 8, 2024
- Manufacturer:
- LEXUS
SummarySome 2024 model year GX 550 and 2022 – 2024 model year LX 600 vehicles may exhibit a condition where the front brakes produce a squealing noise when driving forward or in reverse.
Associated Products (4)Associated Documents - July 29, 2024•Document ID: 11007456Service Bulletin/Repair InstructionsSTRUCTURE:BODY
- Mfr Comm. #:
- L-SB-0030-24 Rev1
- Date Added:
- September 7, 2024
- Manufacturer:
- LEXUS
SummarySome 2005 – 2024 Lexus vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manuals and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This Service Bulletin is to provide a general overview and direction for the odor remediation process.
Associated Products (42)Associated Documents - July 29, 2024•Document ID: 11006162Service Bulletin/Repair InstructionsSTRUCTURE:BODY
- Mfr Comm. #:
- L-SB-0030-24 Rev1
- Date Added:
- August 8, 2024
- Manufacturer:
- LEXUS
SummarySome 2005 – 2024 Lexus vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manuals and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This Service Bulletin is to provide a general overview and direction for the odor remediation process.
Associated Products (42)Associated Documents - June 21, 2024•Document ID: 11005121Service Bulletin/Repair InstructionsSTRUCTURE:BODY
- Mfr Comm. #:
- L-SB-0030-24
- Date Added:
- July 23, 2024
- Manufacturer:
- LEXUS
SummarySome 2005 – 2024 Lexus vehicles that have undergone water intrusion may exhibit a condition in which a musty smell is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to all model and model year specific Repair Manuals and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This Service Bulletin is to provide a general overview and direction for the odor remediation process.
Associated Products (42)Associated Documents - June 21, 2024•Document ID: 11005063Service Bulletin/Repair InstructionsSTRUCTURE:BODY
- Mfr Comm. #:
- L-SB-0030-24
- Date Added:
- July 23, 2024
- Manufacturer:
- LEXUS
SummarySome 2005 – 2024 Lexus vehicles that have undergone water intrusion may exhibit a condition in which a musty smell is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to all model and model year specific Repair Manuals and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This Service Bulletin is to provide a general overview and direction for the odor remediation process.
Associated Products (42)Associated Documents - May 28, 2024•Document ID: 11005178Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- L-SB-0027-24
- Date Added:
- July 23, 2024
- Manufacturer:
- LEXUS
SummaryA head unit software update is now available for 2022 model year LX 600, NX 250, NX 350, NX 350h, and NX 450h+ vehicles equipped with Lexus Multimedia (version 1020 or earlier). This update provides improved performance and capability for the following: •User Profile configuration and display. •Cloud Navigation and Intelligent Voice Assistant. •Mobile device connectivity. •On-screen display and system settings/configuration. •Security enhancements. A head unit software update is now available for 2022 LX 600, NX 250, NX 350, NX 350h, and NX 450h+ vehicles equipped with Lexus Multimedia (earlier than version 1040). This software update includes the following improvements: •Cloud navigation. •Intelligent assistant voice recognition. •Showing and controlling explicit audio content. •User interface. •Bluetooth®. •Bug fixes. This software update removes the following feature: •Hybrid radio. A head unit software update is now available for 2023 model year LX 600, NX 250, NX 350, NX 350h, and NX 450h+ vehicles equipped with Lexus Multimedia (version 1040 or earlier). This software update provides improved performance and capability for the following: •User Profile. •Over-the-air (OTA) notifications. •Ability to search during a call. •Bug fixes settings/configuration. •Security enhancements. A head unit software update is now available for 2022 – 2023 model year LX 600 vehicles; 2023 – 2024 model year RX 350, RX 350h, RX 450h+, and RX 500h vehicles; 2022 – 2024 model year NX 250, NX 350, NX 350h, and NX 450h+ vehicles; 2023 model RZ 450e vehicles equipped with Lexus Multimedia (earlier than version 2050). This software update includes the following improvements: •User interface design. •Intelligent assistant. •Navigation lane guidance. •Phone book search. •Bug fixes. A head unit software update is now available for 2022 – 2024 model year LX 600, NX 250, NX 350, NX 350h, and NX 450h+ vehicles; 2023 – 2024 model year RX 350, RX 350h, RX 450h+, RX 500h, and RZ 450e vehicles; 2024 model year TX 350, TX 500h, and TX 550h+ vehicles equipped with Lexus Multimedia (earlier than version 2170). This software update includes the following improvements: •User Profile. •User interface. •Cloud navigation. •Intelligent assistant voice recognition. •Bug fixes.
Associated Products (11)Associated Documents - April 24, 2024•Document ID: 11003652Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- L-TT-0323-23 Rev1
- Date Added:
- July 6, 2024
- Manufacturer:
- LEXUS
SummaryWhen setting up the Lexus Interface (21MM) user profile, if the QR code is not working please use the following recommendations. 1. Refer to the TAS 21MM Diagnostics Pre-Call Worksheet (PCW) on the TAS case creation page. The following steps will provide some answers for the PCW. 2. Start with the vehicle running outside for 5-10 minutes in an area with no overhead obstructions. a. Enter the radio Service Menu (diagnostic mode) using Techstream or GTS+, or the manual swiping method as outlined in the Repair Manual. b. Once the Service Menu is shown, the Function Check/Setting, and Product information buttons will be used. 3. Select the Product Information button to display radio and DCM registration details. 4. Accurate GNSS Date and Time is needed for the QR code to work. From the Service Menu select Function Check/Setting > System Sensors Check to display GNSS details.
Associated Products (15)Associated Documents - April 24, 2024•Document ID: 11003597Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- L-TT-0323-23 Rev1
- Date Added:
- July 6, 2024
- Manufacturer:
- LEXUS
SummaryWhen setting up the Lexus Interface (21MM) user profile, if the QR code is not working please use the following recommendations. 1. Refer to the TAS 21MM Diagnostics Pre-Call Worksheet (PCW) on the TAS case creation page. The following steps will provide some answers for the PCW. 2. Start with the vehicle running outside for 5-10 minutes in an area with no overhead obstructions. a. Enter the radio Service Menu (diagnostic mode) using Techstream or GTS+, or the manual swiping method as outlined in the Repair Manual. b. Once the Service Menu is shown, the Function Check/Setting, and Product information buttons will be used. 3. Select the Product Information button to display radio and DCM registration details. 4. Accurate GNSS Date and Time is needed for the QR code to work. From the Service Menu select Function Check/Setting > System Sensors Check to display GNSS details.
Associated Products (15)Associated Documents - April 19, 2024•Document ID: 11003650Service Bulletin/Repair InstructionsSTRUCTURE:BODY
- Mfr Comm. #:
- L-SB-0023-24
- Date Added:
- July 6, 2024
- Manufacturer:
- LEXUS
SummaryTo prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.
Associated Products (50)Associated Documents - April 19, 2024•Document ID: 11003648Service Bulletin/Repair InstructionsSTRUCTURE:BODY
- Mfr Comm. #:
- L-SB-0024-24
- Date Added:
- July 6, 2024
- Manufacturer:
- LEXUS
SummaryThe condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. While Lexus paint quality, durability, and resistance to environmental factors is continuously being improved, it remains the responsibility of the dealer to protect and maintain the vehicle’s paint finish from the time of arrival at the dealership until retail delivery to the customer. In areas known for high frequency and/or concentration of acid rain, frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. BO029-91. •The entire bulletin has been updated. Service Bulletin No. BO029-91 is obsolete
Associated Products (51)Associated Documents - April 19, 2024•Document ID: 11003643Service Bulletin/Repair InstructionsSTRUCTURE:BODY
- Mfr Comm. #:
- L-SB-0022-24
- Date Added:
- July 6, 2024
- Manufacturer:
- LEXUS
SummaryAcid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: •Minor damage: requires only buffing to repair. •Moderate damage: usually requires neutralizing, color sanding, and buffing. •Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. While the quality and durability of paint on Lexus vehicles is continuously being improved, it remains the dealer’s responsibility to protect and maintain the quality of the vehicle’s paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
Associated Products (46)Associated Documents - April 19, 2024•Document ID: 11003642Service Bulletin/Repair InstructionsSTRUCTURE:BODY
- Mfr Comm. #:
- L-SB-0021-24
- Date Added:
- July 6, 2024
- Manufacturer:
- LEXUS
SummaryLexus vehicles are currently protected with RapgardTM protective film designed to protect the horizontal painted surfaces. This material protects from acid rain, environmental fallout, and rail contamination. Follow the Removal Procedure in this bulletin to remove the RapgardTM protective film within 90 days from initial application. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. L-PG004-94. •The entire bulletin has been updated.
Associated Products (46)Associated Documents - April 19, 2024•Document ID: 11003641Service Bulletin/Repair InstructionsSTRUCTURE:BODY
- Mfr Comm. #:
- L-SB-0020-24
- Date Added:
- July 6, 2024
- Manufacturer:
- LEXUS
SummaryVehicles may occasionally be subjected to contamination by airborne iron particles shed from railroad tracks, train wheels, exposure to heavy machinery facilities, grinding, welding, etc. This type of contamination can be identified by the presence of small, red or brown particles on the paint surface. These particles are often difficult to see on dark color paints but can be easily felt when brushing a hand across horizontal body surfaces such as the hood, roof, or deck lid. Follow the Repair Procedure in this bulletin to clean vehicles that may have been subjected to contamination by airborne iron particles such as rail dust during rail transportation or extended storage near industrial areas.
Associated Products (46)Associated Documents