Kia Optima Service Bulletins (2013)
299 manufacturer communications on file.
- October 12, 2018•Document ID: 10147431Service Bulletin/Repair InstructionsSERVICE BRAKES
- Mfr Comm. #:
- TSBCHA092
- Date Added:
- November 13, 2018
- Manufacturer:
- KIA
SummaryTSB: BRAKE PEDAL STOPPER PAD REPLACEMENT - This bulletin provides the procedure to replace the brake pedal stopper pad on some 2012-2013MY Optima (QF) vehicles, produced from August 12, 2011 through September 27, 2013. The brake pedal stopper pad may deteriorate over time, allowing the stop lamp switch plunger to remain extended when the brake pedal is released. A deteriorated pad can result in the continuous illumination of the stop lamps. If the continuous illumination of the stop lamps is duplicated, follow the procedure outlined in this bulletin to replace the brake pedal stopper pad.
Associated Products (2)Associated Documents - September 28, 2018•Document ID: 10145194Service Bulletin/Repair InstructionsSERVICE BRAKES, HYDRAULIC:PEDALS AND LINKAGES
- Mfr Comm. #:
- WTY011_REIMB
- Date Added:
- October 9, 2018
- Manufacturer:
- KIA
SummaryWARRANTY EXTENSION PROGRAM (WTY011) - REQUEST FOR REIMBURSEMENT FORM - 2012-2013 MY OPTIMA BRAKE STOPPER PAD Kia New Vehicle Limited Warranty Extension
Associated Products (2)Associated Documents - September 28, 2018•Document ID: 10145192Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; SERVICE BRAKES, HYDRAULIC:PEDALS AND LINKAGES
- Mfr Comm. #:
- WTY011_OWNER
- Date Added:
- October 9, 2018
- Manufacturer:
- KIA
SummaryWARRANTY EXTENSION PROGRAM (WTY011) - OWNER LETTER - Dear Kia Optima Owner: Kia Motors America, Inc. takes pride in providing you with high quality and dependable vehicles. In order to maintain these standards, Kia is extending the New Vehicle Limited Warranty coverage, to all owners, for the brake stopper pad on certain 2012-2013 MY Kia Optima vehicles from 5-years/60,000-miles to 15-years/unlimited-miles, starting from the date of first service. The material of the brake pedal stopper pad, which is located between the stop lamp switch and the brake pedal arm, may deteriorate over time allowing the stop lamp switch plunger to remain extended when the brake pedal is released. A deteriorated pad can result in the continuous illumination of the stop lamps.
Associated Products (2)Associated Documents - September 26, 2018•Document ID: 10145193Service Bulletin/Repair InstructionsSERVICE BRAKES, HYDRAULIC:PEDALS AND LINKAGES
- Mfr Comm. #:
- WTY011_QA
- Date Added:
- October 9, 2018
- Manufacturer:
- KIA
SummaryWARRANTY EXTENSION PROGRAM (WTY011) - Q & A - 2012-2013 MY OPTIMA BRAKE PEDAL STOPPER PAD NEW VEHICLE LIMITED WARRANTY EXTENSION
Associated Products (2)Associated Documents - September 26, 2018•Document ID: 10145191Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; SERVICE BRAKES, HYDRAULIC:PEDALS AND LINKAGES
- Mfr Comm. #:
- WTY011_DPSM
- Date Added:
- October 9, 2018
- Manufacturer:
- KIA
SummaryWARRANTY EXTENSION PROGRAM (WTY011) - DEALER PARTS & SERVICE MANAGER LETTER - Kia Motors America, Inc. is extending the warranty coverage, to all owners, for the brake pedal stopper pad on all 2012-2013 MY Optima (QF) vehicles, manufactured at KMMG, from 5-years/60,000-miles to 15-years/unlimited-miles, starting from the date of first service. The material of the brake pedal stopper pad, which is located between the stop lamp switch and the brake pedal arm, may deteriorate over time allowing the stop lamp switch plunger to remain extended when the brake pedal is released. A deteriorated pad can result in the continuous illumination of the stop lamps.
Associated Products (2)Associated Documents - September 26, 2018•Document ID: 10145190Service Bulletin/Repair InstructionsSERVICE BRAKES, HYDRAULIC:PEDALS AND LINKAGES
- Mfr Comm. #:
- WTY011_DP
- Date Added:
- October 9, 2018
- Manufacturer:
- KIA
SummaryWARRANTY EXTENSION PROGRAM (WTY011) - DEALER PRINCIPAL LETTER - Kia Motors America, Inc. is extending the warranty coverage, to all owners, for the brake pedal stopper pad on all 2012-2013 MY Optima (QF) vehicles, manufactured at KMMG, from 5-years/60,000-miles to 15-years/unlimited-miles, starting from the date of first service. The material of the brake pedal stopper pad, which is located between the stop lamp switch and the brake pedal arm, may deteriorate over time allowing the stop lamp switch plunger to remain extended when the brake pedal is released. A deteriorated pad can result in the continuous illumination of the stop lamps.
Associated Products (2)Associated Documents - August 28, 2018•Document ID: 10145149Service Bulletin/Repair InstructionsEQUIPMENT; ELECTRICAL SYSTEM; ENGINE
- Mfr Comm. #:
- DC_20180828
- Date Added:
- October 9, 2018
- Manufacturer:
- KIA
SummaryDEALER COMMUNICATION - RECENT KIA MEDIA REPORTS - Dear Kia Retailer, You and your customers may have seen recent media reports regarding thermal incidents in Kia vehicles or NHTSA?s announcement of the opening of a Defect Petition for fire cases involving the 2011-14 Sorentos and Optimas, and I want to update you on KMA?s response to this issue. All automobiles contain combustible materials and a vehicle fire may be a result of any number of complex factors which must be carefully evaluated by trained technicians to, if possible, determine its cause and, ultimately, determine if a defect trend exists. At Kia, customer safety is paramount and although both KMA and NHTSA have independently concluded that no defect trends exist, KMA has significantly increased its committed resources to ensure that all thermal incidents are fully evaluated.
Associated Products (8)Associated Documents - August 16, 2018•Document ID: 10144232Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- TSBELE151
- Date Added:
- September 10, 2018
- Manufacturer:
- KIA
SummaryTSB: BMS LOGIC IMPROVEMENT AFTER HIGH VOLTAGE BATTERY REPLACEMENT - This bulletin provides the procedure to improve the logic of the Battery Management System (BMS) on some 2011-2016MY Optima Hybrid (TF HEV) vehicles, produced from February 15, 2011 through July 22, 2015, to match the new generation high voltage (HV) battery assemblies.
Associated Products (6)Associated Documents - August 13, 2018•Document ID: 10144237Service Bulletin/Repair InstructionsPOWER TRAIN
- Mfr Comm. #:
- TSBTRA079
- Date Added:
- September 10, 2018
- Manufacturer:
- KIA
SummaryTSB: SERVICE ACTION: HCU/TCU LOGIC IMPROVEMENT FOR DTC P1744 (400 MESH EQUIPPED TRANS) (SA351) - This bulletin provides the procedure to improve the logic of the Hybrid Control Unit (HCU) and the Transmission Control Unit (TCU) on some 2013-2015MY Optima Hybrid (TF HEV) vehicles, produced from September 27, 2012 through September 5, 2014, which may experience a malfunction indicator lamp illumination with DTC P1744. To correct this concern, apply the improved logic to the HCU and TCU using the KDS ECU Upgrade function as described in this bulletin.
Associated Products (3)Associated Documents - August 13, 2018•Document ID: 10144235Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; POWER TRAIN
- Mfr Comm. #:
- TSBTRA068_CLOSED
- Date Added:
- September 10, 2018
- Manufacturer:
- KIA
SummaryTSB: HCU/TCU LOGIC IMPROVEMENT FOR DTC P1744 (400 MESH EQUIPPED TRANSMISSIONS ONLY) - TSB TRA068 CLOSED. REFER TO TSB TRA079/SA351
Associated Products (5)Associated Documents - May 17, 2018•Document ID: 10142244Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- TSBELE147
- Date Added:
- June 25, 2018
- Manufacturer:
- KIA
SummaryTSB - BMS LOGIC IMPROVEMENT FOR DTC P1B70 - This bulletin provides the procedure to improve the logic of the Battery Management System (BMS) on some 2011-2016MY Optima Hybrid (TF HEV) vehicles, produced from February 15, 2011 through July 22, 2015, which may experience a malfunction indicator light (MIL) illumination with DTC P1B70 even though there is no actual malfunction.
Associated Products (6)Associated Documents - April 10, 2018•Document ID: 10136505Service Bulletin/Repair InstructionsPOWER TRAIN; POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM)
- Mfr Comm. #:
- TSBTRA059_R4
- Date Added:
- May 14, 2018
- Manufacturer:
- KIA
SummaryTSB - HCU/TCU UPGRADE ? FOR 100MESH SOLENOID - EQUIPPED HYBRID TRANSMISSIONS - This bulletin has been revised to include additional information. This bulletin provides information related to a software upgrade of the Hybrid Control Unit (HCU) and the Transmission Control Unit (TCU) of some 2011-2016MY Optima Hybrid (TF HEV) after replacement of the transmission with improved 100 mesh solenoids has taken place.
Associated Products (6)Associated Documents - March 21, 2018•Document ID: 10133183Service Bulletin/Repair InstructionsPOWER TRAIN
- Mfr Comm. #:
- TSBTRA059_R3
- Date Added:
- April 16, 2018
- Manufacturer:
- KIA
SummaryTSB - HCU/TCU UPGRADE ? FOR 100MESH SOLENOID EQUIPPED HYBRID TRANSMISSIONS - This bulletin has been revised to include additional information. This bulletin provides information related to a software upgrade of the Hybrid Control Unit (HCU) and the Transmission Control Unit (TCU) of some 2011-2016MY Optima Hybrid (TF HEV) after replacement of the transmission with improved 100 mesh solenoids has taken place. To apply the improved logic, the HCU/TCU should be reprogrammed using the KDS download, as described in this bulletin.
Associated Products (6)Associated Documents - March 2, 2018•Document ID: 10133170Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- PS539
- Date Added:
- April 16, 2018
- Manufacturer:
- KIA
SummaryPITSTOP - ENGINE COMPONENT RE-USE GUIDELINES - In general, parts and components removed during engine repairs should be considered serviceable, and should be thoroughly cleaned and transferred to the new engine.
Associated Products (147)Associated Documents - February 23, 2018•Document ID: 10130099Service Bulletin/Repair InstructionsSTEERING: STEERING WHEEL/HANDLE BAR; STEERING
- Mfr Comm. #:
- TSBCHA060_R1
- Date Added:
- March 13, 2018
- Manufacturer:
- KIA
SummaryTSB - ECM UPGRADE ? STEERING LOGIC IMPROVEMENT -This bulletin has been revised to include additional information. This bulletin provides information related to the MDPS ECU software upgrade for some 2011 ~ 2014MY Optima (TF/QF) vehicles, produced from Job #1 through July 27, 2014, which may experience a notchy feel in the steering wheel.
Associated Products (4)Associated Documents - February 16, 2018•Document ID: 10130104Service Bulletin/Repair InstructionsPOWER TRAIN:AXLE ASSEMBLY:AXLE SHAFT
- Mfr Comm. #:
- TSBTRA047_R2
- Date Added:
- March 13, 2018
- Manufacturer:
- KIA
SummaryTSB - DRIVESHAFT SERVICEABILITY - This bulletin has been revised most recently to include additional information. This bulletin provides information regarding axle shaft serviceability for Kia vehicles equipped with a six-speed automatic transmission.
Associated Products (55)2018 Kia Forte2018 Kia Optima2018 Kia Rio2018 Kia Sorento2018 Kia Soul2018 Kia Sportage2017 Kia Forte2017 Kia Optima2017 Kia Rio2017 Kia Sedona2017 Kia Sorento2017 Kia Soul2017 Kia Sportage2016 Kia Forte2016 Kia Optima2016 Kia Rio2016 Kia Sedona2016 Kia Sorento2016 Kia Soul2016 Kia Sportage+ 35 moreAssociated Documents - December 13, 2017•Document ID: 10127029Service Bulletin/Repair InstructionsFUEL SYSTEM, GASOLINE; POWER TRAIN
- Mfr Comm. #:
- TSBENG172
- Date Added:
- January 16, 2018
- Manufacturer:
- KIA
SummaryTSB - SERVICE ACTION: TURBO OIL FEED LINE REPLACEMENT (SA300) - This bulletin provides the procedure to replace the turbo oil feed line on some 2011-2015MY Optima (TF), produced from November 1, 2010 through August 30, 2011, 2012-2015MY Optima (QF), produced from August 31, 2011 through October 2, 2015, and 2011-2015MY Sportage (SL) vehicles, produced from December 30, 2010 through November 6, 2015, equipped with Theta 2.0T-GDI engine, which may exhibit an oil leak at the turbo oil feed line.
Associated Products (10)Associated Documents - November 20, 2017•Document ID: 10126423Service Bulletin/Repair InstructionsELECTRICAL SYSTEM:SOFTWARE
- Mfr Comm. #:
- TSBELE091R3
- Date Added:
- December 22, 2017
- Manufacturer:
- KIA
SummaryTSB - IDENTIFYING HEAD UNIT SOFTWARE VERSION FOR DIRECT EXCHANGE - This bulletin provides the procedure on how to identify and record the head unit software level on various head unit platforms and generations.
Associated Products (45)2016 Kia Cadenza2016 Kia Forte2016 Kia K9002016 Kia Optima2016 Kia Rio2016 Kia Sedona2016 Kia Sorento2016 Kia Soul2016 Kia Sportage2015 Kia Cadenza2015 Kia Forte2015 Kia K9002015 Kia Optima2015 Kia Rio2015 Kia Sedona2015 Kia Sorento2015 Kia Soul2015 Kia Sportage2014 Kia Cadenza2014 Kia Forte+ 25 moreAssociated Documents - October 31, 2017•Document ID: 10123322Service Bulletin/Repair InstructionsEXTERIOR LIGHTING
- Mfr Comm. #:
- TSBBOD172
- Date Added:
- November 14, 2017
- Manufacturer:
- KIA
SummaryTSB - OUTSIDE REAR COMBINATION LAMP WATER INTRUSION - This bulletin provides the procedure to replace the outside rear combination lamp pads on some 2011-2015MY Optima (TF), produced from August 12, 2010 through July 23, 2015, and some 2011-2016MY Optima (TF HEV) vehicles, produced from February 15, 2011 through July 22, 2015, which may exhibit evidence of water intrusion in the outside rear combination lamps.
Associated Products (6)Associated Documents - October 12, 2017•Document ID: 10123331Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- TSBTRA068
- Date Added:
- November 14, 2017
- Manufacturer:
- KIA
SummaryTSB - HCU/TCU LOGIC IMPROVEMENT FOR DTC P1744 (400 MESH EQUIPPED TRANSMISSIONS ONLY) - This bulletin provides the procedure to improve the logic of the Hybrid Control Unit (HCU) on some 2011-2012MY Optima Hybrid (TF HEV), produced from February 15, 2011 through December 28, 2012, and both the Hybrid Control Unit (HCU) and the Transmission Control Unit (TCU) on some 2013-2015MY Optima Hybrid (TF HEV) vehicles, produced from January 15, 2013 through March 27, 2015, which may experience a malfunction indicator lamp illumination with DTC P1744. To correct this concern, apply the improved logic to the HCU only (11-12MY) or HCU and TCU (13-15MY) using the KDS ECU Upgrade function as described in this bulletin. For confirmation that the latest reflash has been applied to a vehicle you are working on, verify the ROM ID using the table on page 3 of this bulletin.
Associated Products (5)Associated Documents