Jeep Renegade Service Bulletins
1,142 manufacturer communications on file.
- March 27, 2020•Document ID: 10175175Service Bulletin/Repair InstructionsPOWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM); EXTERIOR LIGHTING; ELECTRICAL SYSTEM
- Mfr Comm. #:
- 18-028-20
- Date Added:
- May 18, 2020
- Manufacturer:
- JEEP
SummaryFlash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the PCM with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find one or more ofthe following DTCs have been set:U0100 - Lost Communication With ECM/PCM. P0456 - EVAP System Small Leak. P1CEA - Boost Side EVAP Purge System Performance. In addition, the customer may also experience the following:The vehicle will not crank if the ECM gets hotter than 50 °C (122°F). Intermittent no-crank when first starting the vehicle.
Associated Products (1)Associated Documents - March 27, 2020•Document ID: 10175172Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; STEERING; WHEELS
- Mfr Comm. #:
- 08-043-20
- Date Added:
- May 18, 2020
- Manufacturer:
- JEEP
SummaryFlash: Comfort Seat and Wheel Module (CSWM) Enhancements This bulletin involves updating the CSWM with the latest available software. The customer may describe the following:The heated steering wheel and heated seats, turn off when Engine Stop Start (ESS) activates.
Associated Products (2)Associated Documents - March 27, 2020•Document ID: 10174256Service Bulletin/Repair InstructionsPOWER TRAIN; ELECTRICAL SYSTEM; EQUIPMENT ADAPTIVE/MOBILITY
- Mfr Comm. #:
- 21-026-20
- Date Added:
- April 27, 2020
- Manufacturer:
- JEEP
SummaryFlash: Transmission Control Module (TCM) Updates This bulletin involves reprogramming the TCM with the latest available software. Some customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation, a technician may find oneor more of the following Diagnostic Trouble Codes (DTCs) have been set:P0780 - Gear Shift Malfunction. P1DD2-00 - Torque Request Signal From TCM Denied. Customers or technicians may experience the following:Transmission will be placed into Limp-in mode. While driving at 65 kph (40 mph) a bump will be felt and the RPM will jumpto 4000 RPM.
Associated Products (1)Associated Documents - March 27, 2020•Document ID: 10174255Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; EQUIPMENT; POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM)
- Mfr Comm. #:
- 18-028-20
- Date Added:
- April 27, 2020
- Manufacturer:
- JEEP
SummaryFlash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the PCM with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find one or more ofthe following DTCs have been set:U0100 - Lost Communication With ECM/PCM. P0456 - EVAP System Small Leak. P1CEA - Boost Side EVAP Purge System Performance. In addition, the customer may also experience the following:The vehicle will not crank if the ECM gets hotter than 50 °C (122°F). Intermittent no-crank when first starting the vehicle.
Associated Products (1)Associated Documents - March 27, 2020•Document ID: 10174252Service Bulletin/Repair InstructionsPOWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM); ELECTRICAL SYSTEM; ENGINE
- Mfr Comm. #:
- 08-043-20
- Date Added:
- April 27, 2020
- Manufacturer:
- JEEP
SummaryFlash: Comfort Seat and Wheel Module (CSWM) Enhancements This bulletin involves updating the CSWM with the latest available software. The customer may describe the following:The heated steering wheel and heated seats, turn off when Engine Stop Start (ESS) activates.
Associated Products (2)Associated Documents - March 24, 2020•Document ID: 10175575Service Bulletin/Repair InstructionsEXTERIOR LIGHTING; ELECTRICAL SYSTEM; POWER TRAIN
- Mfr Comm. #:
- 21-025-20
- Date Added:
- May 26, 2020
- Manufacturer:
- JEEP
SummaryFlash: Transmission Control Module (TCM) Updates This bulletin involves reprogramming the TCM with the latest available software. Some customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation, a technician may find the following Diagnostic Trouble Codes (DTCs) have been set:P0780 - Gear Shift Malfunction. P1DD2-00 - Torque Request Signal From TCM Denied. Customers or technicians may experience the following:Transmission will be placed into Limp-in mode. While driving at 65 kph (40 mph) a bump will be felt and the RPM will jump to 4000 RPM.
Associated Products (1)Associated Documents - March 24, 2020•Document ID: 10175162Service Bulletin/Repair InstructionsPOWER TRAIN; EXTERIOR LIGHTING; ELECTRICAL SYSTEM
- Mfr Comm. #:
- 21-025-20
- Date Added:
- May 18, 2020
- Manufacturer:
- JEEP
SummaryFlash: Transmission Control Module (TCM) Updates This bulletin involves reprogramming the TCM with the latest available software. Some customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation, a technician may find the following Diagnostic Trouble Codes (DTCs) have been set:P0780 - Gear Shift Malfunction. P1DD2-00 - Torque Request Signal From TCM Denied. Customers or technicians may experience the following:Transmission will be placed into Limp-in mode. While driving at 65 kph (40 mph) a bump will be felt and the RPM will jump to 4000 RPM.
Associated Products (1)Associated Documents - March 24, 2020•Document ID: 10174242Service Bulletin/Repair InstructionsEQUIPMENT ADAPTIVE/MOBILITY; ELECTRICAL SYSTEM; POWER TRAIN:AUTOMATIC TRANSMISSION:GEAR POSITION INDICATION (PRNDL); POWER TRAIN
- Mfr Comm. #:
- 21-025-20
- Date Added:
- April 27, 2020
- Manufacturer:
- JEEP
SummaryFlash: Transmission Control Module (TCM) Updates This bulletin involves reprogramming the TCM with the latest available software. Some customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation, a technician may find the following Diagnostic Trouble Codes (DTCs) have been set:P0780 - Gear Shift Malfunction. P1DD2-00 - Torque Request Signal From TCM Denied. Customers or technicians may experience the following:Transmission will be placed into Limp-in mode. While driving at 65 kph (40 mph) a bump will be felt and the RPM will jump to 4000 RPM.
Associated Products (1)Associated Documents - March 18, 2020•Document ID: 10175563Service Bulletin/Repair InstructionsLANE DEPARTURE; FUEL SYSTEM, DIESEL:STORAGE:TANK ASSEMBLY; EXTERIOR LIGHTING; STEERING; POWER TRAIN; ELECTRICAL SYSTEM
- Mfr Comm. #:
- 08-041-20
- Date Added:
- May 26, 2020
- Manufacturer:
- JEEP
SummaryFlash: Electric Power Steering (EPS) Module Updates This bulletin involves updating the EPS module with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find that the following Diagnostic Trouble Codes (DTCs) have been set:C1013-49 - Half Module Faulty - Internal Electronic Failure. U1702-64 - Electric Power Steering (EPS) - Signal Plausibility Failure. Both DTCs listed will be set simultaneously.In addition, the customer may notice one or more of the following:A ?Lane Assist Malfunction/Feature Not Available? message displayed in the Electronic Vehicle Information Center (EVIC). ?Lane Sense Off? message appears in the EVIC while driving, simultaneously turning the lane sense off. Power steering system warning lamp is illuminated on the Instrument Panel Cluster (IPC)Fig. 1.IPC Warning Lamp
Associated Products (1)Associated Documents - March 18, 2020•Document ID: 10175150Service Bulletin/Repair InstructionsSTEERING:AUTOMATED/ADAPTIVE STEERING; EQUIPMENT ADAPTIVE/MOBILITY
- Mfr Comm. #:
- 08-041-20
- Date Added:
- May 18, 2020
- Manufacturer:
- JEEP
SummaryFlash: Electric Power Steering (EPS) Module Updates This bulletin involves updating the EPS module with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find that the following Diagnostic Trouble Codes (DTCs) have been set:C1013-49 - Half Module Faulty - Internal Electronic Failure. U1702-64 - Electric Power Steering (EPS) - Signal Plausibility Failure. Both DTCs listed will be set simultaneously.In addition, the customer may notice one or more of the following:A ?Lane Assist Malfunction/Feature Not Available? message displayed in the Electronic Vehicle Information Center (EVIC). ?Lane Sense Off? message appears in the EVIC while driving, simultaneously turning the lane sense off. Power steering system warning lamp is illuminated on the Instrument Panel Cluster (IPC)Fig. 1.IPC Warning Lamp
Associated Products (1)Associated Documents - March 18, 2020•Document ID: 10174230Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; STEERING
- Mfr Comm. #:
- 08-041-20
- Date Added:
- April 27, 2020
- Manufacturer:
- JEEP
SummaryFlash: Electric Power Steering (EPS) Module Updates This bulletin involves updating the EPS module with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find that the following Diagnostic Trouble Codes (DTCs) have been set:C1013-49 - Half Module Faulty - Internal Electronic Failure. U1702-64 - Electric Power Steering (EPS) - Signal Plausibility Failure. Both DTCs listed will be set simultaneously.In addition, the customer may notice one or more of the following:A ?Lane Assist Malfunction/Feature Not Available? message displayed in the Electronic Vehicle Information Center (EVIC). ?Lane Sense Off? message appears in the EVIC while driving, simultaneously turning the lane sense off. Power steering system warning lamp is illuminated on the Instrument Panel Cluster (IPC)Fig. 1.IPC Warning Lamp
Associated Products (1)Associated Documents - March 13, 2020•Document ID: 10175481Service Bulletin/Repair InstructionsPOWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM); ELECTRICAL SYSTEM
- Mfr Comm. #:
- S2008000020
- Date Added:
- May 26, 2020
- Manufacturer:
- JEEP
SummaryNo Start, No Crank After PCM And RFHUB Replaced, DTC P0513 Invalid Skim Key Sets In The PCM
Associated Products (4)Associated Documents - March 13, 2020•Document ID: 10175069Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- S2008000020
- Date Added:
- May 18, 2020
- Manufacturer:
- JEEP
SummaryNo Start, No Crank After PCM And RFHUB Replaced, DTC P0513 Invalid Skim Key Sets In The PCM
Associated Products (4)Associated Documents - March 13, 2020•Document ID: 10174149Service Bulletin/Repair InstructionsEQUIPMENT:ELECTRICAL
- Mfr Comm. #:
- S2008000020
- Date Added:
- April 27, 2020
- Manufacturer:
- JEEP
SummaryNo Start, No Crank After PCM And RFHUB Replaced, DTC P0513 Invalid Skim Key Sets In The PCM
Associated Products (4)Associated Documents - March 7, 2020•Document ID: 10175548Service Bulletin/Repair InstructionsSTRUCTURE; ELECTRICAL SYSTEM
- Mfr Comm. #:
- 08-030-20 REV. A
- Date Added:
- May 26, 2020
- Manufacturer:
- JEEP
SummaryFlash: Body Control Module (BCM) Enhancements This bulletin involves reprogramming the BCM with the latest available software. The customer may describe the following:After starting the vehicle with remote start, the engine stops when the doors are unlocked.
Associated Products (4)Associated Documents - March 7, 2020•Document ID: 10175135Service Bulletin/Repair InstructionsSTRUCTURE; ELECTRICAL SYSTEM
- Mfr Comm. #:
- 08-030-20 REV. A
- Date Added:
- May 18, 2020
- Manufacturer:
- JEEP
SummaryFlash: Body Control Module (BCM) Enhancements This bulletin involves reprogramming the BCM with the latest available software. The customer may describe the following:After starting the vehicle with remote start, the engine stops when the doors are unlocked.
Associated Products (4)Associated Documents - March 7, 2020•Document ID: 10174215Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- 08-030-20 REV. A
- Date Added:
- April 27, 2020
- Manufacturer:
- JEEP
SummaryFlash: Body Control Module (BCM) Enhancements This bulletin involves reprogramming the BCM with the latest available software. The customer may describe the following:After starting the vehicle with remote start, the engine stops when the doors are unlocked.
Associated Products (4)Associated Documents - March 5, 2020•Document ID: 10175539Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- 09-004-20
- Date Added:
- May 26, 2020
- Manufacturer:
- JEEP
SummaryNo Weep Hole In Muffler Assembly This bulletin involves drilling a weep hole in the muffler assembly. The customer may describe a crank, no start condition, in freezing temperatures. This condition can be caused by condensation freezing in the muffler assembly.
Associated Products (13)Associated Documents - March 5, 2020•Document ID: 10175536Service Bulletin/Repair InstructionsSTRUCTURE; ELECTRICAL SYSTEM
- Mfr Comm. #:
- 08-030-20
- Date Added:
- May 26, 2020
- Manufacturer:
- JEEP
SummaryFlash: Body Control Module (BCM) Enhancements This bulletin involves reprogramming the BCM with the latest available software. The customer may describe the following:After starting the vehicle with remote start, the engine stops when the doors are unlocked.
Associated Products (1)Associated Documents - March 5, 2020•Document ID: 10175126Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING:EXHAUST SYSTEM:MANIFOLD/HEADER/MUFFLER/TAIL PIPE
- Mfr Comm. #:
- 09-004-20
- Date Added:
- May 18, 2020
- Manufacturer:
- JEEP
SummaryNo Weep Hole In Muffler Assembly This bulletin involves drilling a weep hole in the muffler assembly. The customer may describe a crank, no start condition, in freezing temperatures. This condition can be caused by condensation freezing in the muffler assembly.
Associated Products (13)Associated Documents