Jeep Renegade Service Bulletins
1,142 manufacturer communications on file.
- May 6, 2021•Document ID: 10223484Service Bulletin/Repair InstructionsPOWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE:SOFTWARE; ELECTRICAL SYSTEM; POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM)
- Mfr Comm. #:
- 1804521
- Date Added:
- October 17, 2022
- Manufacturer:
- JEEP
SummaryFlash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the PCM with the latest available software. Customers may experience the following: After a short trip and shutting the engine off for 5 - 10 minutes, vehicle exhibits a long crank/start condition.
Associated Products (1)Associated Documents - May 6, 2021•Document ID: 10223331Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; POWER TRAIN
- Mfr Comm. #:
- 1804521
- Date Added:
- October 17, 2022
- Manufacturer:
- JEEP
SummaryFlash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the PCM with the latest available software. Customers may experience the following: After a short trip and shutting the engine off for 5 - 10 minutes, vehicle exhibits a long crank/start condition.
Associated Products (1)Associated Documents - May 6, 2021•Document ID: 10198425Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; POWER TRAIN
- Mfr Comm. #:
- 18-045-21
- Date Added:
- June 28, 2021
- Manufacturer:
- JEEP
SummaryFlash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the PCM with the latest available software. Customers may experience the following: After a short trip and shutting the engine off for 5 - 10 minutes, vehicle exhibits a long crank/start condition.
Associated Products (1)Associated Documents - May 5, 2021•Document ID: 10230096Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; SERVICE BRAKES, HYDRAULIC; EQUIPMENT; EXTERIOR LIGHTING; ELECTRONIC STABILITY CONTROL:AUTOMATIC (ASC); BACK OVER PREVENTION
- Mfr Comm. #:
- 1804321
- Date Added:
- January 17, 2023
- Manufacturer:
- JEEP
SummaryFlash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the Powertrain Control Module (PCM) with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find the following Diagnostic Trouble Codes (DTCs) have been set: P1D7F - ETC Self-Learning Failure. P1524 - Oil Pressure Out Of Range - Camshaft Advance/Retard Disabled. P0000-00 - Will be displayed in the scan tool, but should really be displaying P0326-00 (Knock Sensor 1 Circuit Performance). In addition, the customer may notice the following condition:After a short trip and shutting the engine off for 5-10 minutes, vehicle exhibits a long crank/start condition(EMEA only). Hard start condition caused by spark plugs fouling. A ticking noise coming from the top of the engine area. The ticking noise is heard particularly at idle(EMEA and APAC only).
Associated Products (1)Associated Documents - May 5, 2021•Document ID: 10230095Service Bulletin/Repair InstructionsELECTRONIC STABILITY CONTROL:AUTOMATIC (ASC); BACK OVER PREVENTION; ELECTRICAL SYSTEM; EXTERIOR LIGHTING
- Mfr Comm. #:
- 1804221
- Date Added:
- January 17, 2023
- Manufacturer:
- JEEP
SummaryFlash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the Powertrain Control Module (PCM) with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find one or more of the following Diagnostic Trouble Codes (DTCs) have been set: P1D7F-00 - ETC Self-Learning Failure. P1523-00 - VVA Low Oil Pressure. P1524-00 - Oil Pressure Out Of Range - Camshaft Advance/Retard Disabled. P0141 - O2 Sensor 1/2 Heater Performance. Some customers may experience one or more of the following conditions: After a short trip and shutting the engine off for 5-10 minutes, vehicle exhibits a long crank/start condition(2016 BU EMEA only). Cruise control will not set at 32 kph (20 mph). Engine cranking times out after five seconds. Cruise control will not engage at highway speeds and when in 6th gear. A ticking noise coming from the top of the engine area. The ticking noise is heard particularly at idle (EMEA and APAC only). The following enhancements are also included: Improved purge sensor performance. Updated fuel strategy to inhibit spark plug fouling.
Associated Products (3)Associated Documents - May 5, 2021•Document ID: 10230094Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; ELECTRONIC STABILITY CONTROL:AUTOMATIC (ASC); EXTERIOR LIGHTING
- Mfr Comm. #:
- 1804421
- Date Added:
- January 17, 2023
- Manufacturer:
- JEEP
SummaryFlash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the Powertrain Control Module (PCM) with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find the following Diagnostic Trouble Codes (DTCs) have been set: P1D7F-00 - ETC Self-Learning Failure.(North America only). P0456-00 - EVAP Purge System Small Leak.(North America only). P0441-00 - EVAP Purge System Performance.(North America only). P0440-00 - General EVAP System Failure. (North America only). P0455-00 - EVAP Purge System Large Leak.(North America only). P1CEA-00 - Boost Side EVAP Purge System Performance.(North America only). In addition, the following software enhancement is available: After a short trip and shutting the engine off for 5-10 minutes, vehicle exhibits a long crank/start condition(EMEA only). Updated EVAP system diagnostics.(North America only).
Associated Products (1)Associated Documents - May 5, 2021•Document ID: 10223481Service Bulletin/Repair InstructionsBACK OVER PREVENTION; POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM); ELECTRONIC STABILITY CONTROL:AUTOMATIC (ASC); ELECTRICAL SYSTEM; EQUIPMENT; EXTERIOR LIGHTING; SERVICE BRAKES, HYDRAULIC
- Mfr Comm. #:
- 1804321
- Date Added:
- October 17, 2022
- Manufacturer:
- JEEP
SummaryFlash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the Powertrain Control Module (PCM) with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find the following Diagnostic Trouble Codes (DTCs) have been set: P1D7F - ETC Self-Learning Failure. P1524 - Oil Pressure Out Of Range - Camshaft Advance/Retard Disabled. P0000-00 - Will be displayed in the scan tool, but should really be displaying P0326-00 (Knock Sensor 1 Circuit Performance). In addition, the customer may notice the following condition:After a short trip and shutting the engine off for 5-10 minutes, vehicle exhibits a long crank/start condition(EMEA only). Hard start condition caused by spark plugs fouling. A ticking noise coming from the top of the engine area. The ticking noise is heard particularly at idle(EMEA and APAC only).
Associated Products (1)Associated Documents - May 5, 2021•Document ID: 10223480Service Bulletin/Repair InstructionsSERVICE BRAKES, HYDRAULIC; ELECTRICAL SYSTEM; EXTERIOR LIGHTING; BACK OVER PREVENTION; ELECTRONIC STABILITY CONTROL:AUTOMATIC (ASC); POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM)
- Mfr Comm. #:
- 1804221
- Date Added:
- October 17, 2022
- Manufacturer:
- JEEP
SummaryFlash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the Powertrain Control Module (PCM) with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find one or more of the following Diagnostic Trouble Codes (DTCs) have been set: P1D7F-00 - ETC Self-Learning Failure. P1523-00 - VVA Low Oil Pressure. P1524-00 - Oil Pressure Out Of Range - Camshaft Advance/Retard Disabled. P0141 - O2 Sensor 1/2 Heater Performance. Some customers may experience one or more of the following conditions: After a short trip and shutting the engine off for 5-10 minutes, vehicle exhibits a long crank/start condition(2016 BU EMEA only). Cruise control will not set at 32 kph (20 mph). Engine cranking times out after five seconds. Cruise control will not engage at highway speeds and when in 6th gear. A ticking noise coming from the top of the engine area. The ticking noise is heard particularly at idle (EMEA and APAC only). The following enhancements are also included: Improved purge sensor performance. Updated fuel strategy to inhibit spark plug fouling.
Associated Products (3)Associated Documents - May 5, 2021•Document ID: 10223479Service Bulletin/Repair InstructionsELECTRONIC STABILITY CONTROL:AUTOMATIC (ASC); ELECTRICAL SYSTEM; POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM); EXTERIOR LIGHTING
- Mfr Comm. #:
- 1804421
- Date Added:
- October 17, 2022
- Manufacturer:
- JEEP
SummaryFlash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the Powertrain Control Module (PCM) with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find the following Diagnostic Trouble Codes (DTCs) have been set: P1D7F-00 - ETC Self-Learning Failure.(North America only). P0456-00 - EVAP Purge System Small Leak.(North America only). P0441-00 - EVAP Purge System Performance.(North America only). P0440-00 - General EVAP System Failure. (North America only). P0455-00 - EVAP Purge System Large Leak.(North America only). P1CEA-00 - Boost Side EVAP Purge System Performance.(North America only). In addition, the following software enhancement is available: After a short trip and shutting the engine off for 5-10 minutes, vehicle exhibits a long crank/start condition(EMEA only). Updated EVAP system diagnostics.(North America only).
Associated Products (1)Associated Documents - May 5, 2021•Document ID: 10223324Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; POWER TRAIN
- Mfr Comm. #:
- 1804321
- Date Added:
- October 17, 2022
- Manufacturer:
- JEEP
SummaryFlash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the Powertrain Control Module (PCM) with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find the following Diagnostic Trouble Codes (DTCs) have been set: P1D7F - ETC Self-Learning Failure. P1524 - Oil Pressure Out Of Range - Camshaft Advance/Retard Disabled. P0000-00 - Will be displayed in the scan tool, but should really be displaying P0326-00 (Knock Sensor 1 Circuit Performance). In addition, the customer may notice the following condition:After a short trip and shutting the engine off for 5-10 minutes, vehicle exhibits a long crank/start condition(EMEA only). Hard start condition caused by spark plugs fouling. A ticking noise coming from the top of the engine area. The ticking noise is heard particularly at idle(EMEA and APAC only).
Associated Products (1)Associated Documents - May 5, 2021•Document ID: 10223323Service Bulletin/Repair InstructionsPOWER TRAIN; ELECTRICAL SYSTEM
- Mfr Comm. #:
- 1804221
- Date Added:
- October 17, 2022
- Manufacturer:
- JEEP
SummaryFlash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the Powertrain Control Module (PCM) with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find one or more of the following Diagnostic Trouble Codes (DTCs) have been set: P1D7F-00 - ETC Self-Learning Failure. P1523-00 - VVA Low Oil Pressure. P1524-00 - Oil Pressure Out Of Range - Camshaft Advance/Retard Disabled. P0141 - O2 Sensor 1/2 Heater Performance. Some customers may experience one or more of the following conditions: After a short trip and shutting the engine off for 5-10 minutes, vehicle exhibits a long crank/start condition(2016 BU EMEA only). Cruise control will not set at 32 kph (20 mph). Engine cranking times out after five seconds. Cruise control will not engage at highway speeds and when in 6th gear. A ticking noise coming from the top of the engine area. The ticking noise is heard particularly at idle (EMEA and APAC only). The following enhancements are also included: Improved purge sensor performance. Updated fuel strategy to inhibit spark plug fouling.
Associated Products (3)Associated Documents - May 5, 2021•Document ID: 10223322Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; POWER TRAIN
- Mfr Comm. #:
- 1804421
- Date Added:
- October 17, 2022
- Manufacturer:
- JEEP
SummaryFlash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the Powertrain Control Module (PCM) with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find the following Diagnostic Trouble Codes (DTCs) have been set: P1D7F-00 - ETC Self-Learning Failure.(North America only). P0456-00 - EVAP Purge System Small Leak.(North America only). P0441-00 - EVAP Purge System Performance.(North America only). P0440-00 - General EVAP System Failure. (North America only). P0455-00 - EVAP Purge System Large Leak.(North America only). P1CEA-00 - Boost Side EVAP Purge System Performance.(North America only). In addition, the following software enhancement is available: After a short trip and shutting the engine off for 5-10 minutes, vehicle exhibits a long crank/start condition(EMEA only). Updated EVAP system diagnostics.(North America only).
Associated Products (1)Associated Documents - May 5, 2021•Document ID: 10198418Service Bulletin/Repair InstructionsPOWER TRAIN
- Mfr Comm. #:
- 18-043-21
- Date Added:
- June 28, 2021
- Manufacturer:
- JEEP
SummaryFlash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the Powertrain Control Module (PCM) with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find the following Diagnostic Trouble Codes (DTCs) have been set: P1D7F - ETC Self-Learning Failure. P1524 - Oil Pressure Out Of Range - Camshaft Advance/Retard Disabled. P0000-00 - Will be displayed in the scan tool, but should really be displaying P0326-00 (Knock Sensor 1 Circuit Performance). In addition, the customer may notice the following condition:After a short trip and shutting the engine off for 5-10 minutes, vehicle exhibits a long crank/start condition(EMEA only). Hard start condition caused by spark plugs fouling. A ticking noise coming from the top of the engine area. The ticking noise is heard particularly at idle(EMEA and APAC only).
Associated Products (1)Associated Documents - May 5, 2021•Document ID: 10198417Service Bulletin/Repair InstructionsSERVICE BRAKES, HYDRAULIC; ELECTRICAL SYSTEM; EXTERIOR LIGHTING; BACK OVER PREVENTION; ELECTRONIC STABILITY CONTROL:AUTOMATIC (ASC)
- Mfr Comm. #:
- 18-042-21
- Date Added:
- June 28, 2021
- Manufacturer:
- JEEP
SummaryFlash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the Powertrain Control Module (PCM) with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find one or more of the following Diagnostic Trouble Codes (DTCs) have been set: P1D7F-00 - ETC Self-Learning Failure. P1523-00 - VVA Low Oil Pressure. P1524-00 - Oil Pressure Out Of Range - Camshaft Advance/Retard Disabled. P0141 - O2 Sensor 1/2 Heater Performance. Some customers may experience one or more of the following conditions: After a short trip and shutting the engine off for 5-10 minutes, vehicle exhibits a long crank/start condition(2016 BU EMEA only). Cruise control will not set at 32 kph (20 mph). Engine cranking times out after five seconds. Cruise control will not engage at highway speeds and when in 6th gear. A ticking noise coming from the top of the engine area. The ticking noise is heard particularly at idle (EMEA and APAC only). The following enhancements are also included: Improved purge sensor performance. Updated fuel strategy to inhibit spark plug fouling.
Associated Products (3)Associated Documents - May 5, 2021•Document ID: 10198416Service Bulletin/Repair InstructionsPOWER TRAIN
- Mfr Comm. #:
- 18-044-21
- Date Added:
- June 28, 2021
- Manufacturer:
- JEEP
SummaryFlash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the Powertrain Control Module (PCM) with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find the following Diagnostic Trouble Codes (DTCs) have been set: P1D7F-00 - ETC Self-Learning Failure.(North America only). P0456-00 - EVAP Purge System Small Leak.(North America only). P0441-00 - EVAP Purge System Performance.(North America only). P0440-00 - General EVAP System Failure. (North America only). P0455-00 - EVAP Purge System Large Leak.(North America only). P1CEA-00 - Boost Side EVAP Purge System Performance.(North America only). In addition, the following software enhancement is available: After a short trip and shutting the engine off for 5-10 minutes, vehicle exhibits a long crank/start condition(EMEA only). Updated EVAP system diagnostics.(North America only).
Associated Products (1)Associated Documents - April 29, 2021•Document ID: 10221225Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; EQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC.
- Mfr Comm. #:
- 0807021
- Date Added:
- September 26, 2022
- Manufacturer:
- JEEP
SummaryULQ Radio Enhancements This bulletin involves inspecting and if required, updating the radio software level to 34.2. If the software update is performed on a radio with software below 19.9, the radio could be damaged and will need to be replaced. Customers may experience one or more of the following:Lost radio presets. Radio display screen is black when the ignition is on. Radio may reset, turn itself off and then back on again. Park assist chime will continue to chime after the vehicle is turn off. Radio will display the incorrect speed limit in kph when approaching a road speed camera. In addition the following enhancements are included:Voice Recognition (VR) and Bluetooth® improvements. Improvements for Off-road pages.
Associated Products (12)Associated Documents - April 29, 2021•Document ID: 10194078Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- 08-070-21
- Date Added:
- May 24, 2021
- Manufacturer:
- JEEP
SummaryULQ Radio Enhancements This bulletin involves inspecting and if required, updating the radio software level to 34.2. If the software update is performed on a radio with software below 19.9, the radio could be damaged and will need to be replaced. Customers may experience one or more of the following:Lost radio presets. Radio display screen is black when the ignition is on. Radio may reset, turn itself off and then back on again. Park assist chime will continue to chime after the vehicle is turn off. Radio will display the incorrect speed limit in kph when approaching a road speed camera. In addition the following enhancements are included:Voice Recognition (VR) and Bluetooth® improvements. Improvements for Off-road pages.
Associated Products (12)Associated Documents - April 27, 2021•Document ID: 10221169Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- S2121000007
- Date Added:
- September 26, 2022
- Manufacturer:
- DODGE
SummaryMalfunction Indicator Lamp (MIL) Illuminated. Diagnostic Trouble Code (DTC) P076A ? SC Solenoid Circuit, Set.
Associated Products (4)Associated Documents - April 27, 2021•Document ID: 10194022Service Bulletin/Repair InstructionsEXTERIOR LIGHTING
- Mfr Comm. #:
- S2121000007
- Date Added:
- May 24, 2021
- Manufacturer:
- JEEP
SummaryMalfunction Indicator Lamp (MIL) Illuminated. Diagnostic Trouble Code (DTC) P076A ? SC Solenoid Circuit, Set.
Associated Products (4)Associated Documents - April 27, 2021•Document ID: 10221217Service Bulletin/Repair InstructionsELECTRICAL SYSTEM:12V/24V/48V BATTERY
- Mfr Comm. #:
- 0806621
- Date Added:
- September 26, 2022
- Manufacturer:
- JEEP
SummaryInstalling the Battery Positive Protection Cover (Missing) This bulletin involves installing the missing positive battery post protective cover. The positive battery cable protective cover is missing.
Associated Products (1)Associated Documents