Jeep Grand Cherokee Service Bulletins (2011)
197 manufacturer communications on file.
- May 10, 2013•Document ID: 10188672Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; ENGINE AND ENGINE COOLING; POWER TRAIN:TRANSFER CASE (4-WHEEL DRIVE)
- Mfr Comm. #:
- 21-004-13
- Date Added:
- March 15, 2021
- Manufacturer:
- DODGE
SummaryFlash: Drivetrain Control Module (DCTM) - Transfer Case Operational Enhancements This bulletin involves flashing the Drivetrain Control Module (DCTM) Owners may indicate that they have experienced one or more of the following symptoms: Moaning or groaning noise while coasting and/or during a very light acceleration around 5 to 8 mph (8 to 13 kph). The SERV 4WD message appears and the vehicle shifts from 4WD to 2WD. Binding of the front driveline while turning on steep grades at speeds around 3 to 5 mph (5 to 8 kph).Surge/Shudder at speeds greater than 50 mph (80 kph).
Associated Products (2)Associated Documents - May 10, 2013•Document ID: 10136850Service Bulletin/Repair InstructionsPOWER TRAIN:DRIVELINE:DRIVESHAFT
- Mfr Comm. #:
- 21-004-13
- Date Added:
- May 21, 2018
- Manufacturer:
- DODGE
SummaryFlash: Drivetrain Control Module (DCTM) - Transfer Case Operational Enhancements This bulletin involves flashing the Drivetrain Control Module (DCTM) Owners may indicate that they have experienced one or more of the following symptoms:Moaning or groaning noise while coasting and/or during a very light acceleration around 5 to 8 mph (8 to 13 kph).The SERV 4WD message appears and the vehicle shifts from 4WD to 2WD.Binding of the front driveline while turning on steep grades at speeds around 3 to 5 mph (5 to 8 kph).Surge/Shudder at speeds greater than 50 mph (80 kph).
Associated Products (2)Associated Documents - April 27, 2013•Document ID: 10069238Service Bulletin/Repair InstructionsPOWER TRAIN:AUTOMATIC TRANSMISSION
- Mfr Comm. #:
- 21-004-13
- Date Added:
- June 2, 2016
- Manufacturer:
- JEEP
SummarySUMMARY TO BE PROVIDED ON A FUTURE DATE.
Associated Products (2)Associated Documents - April 27, 2013•Document ID: 10069235Service Bulletin/Repair InstructionsPOWER TRAIN:AUTOMATIC TRANSMISSION
- Mfr Comm. #:
- 21-003-13
- Date Added:
- June 2, 2016
- Manufacturer:
- JEEP
SummarySUMMARY TO BE PROVIDED ON A FUTURE DATE.
Associated Products (6)Associated Documents - April 3, 2013•Document ID: 10215809Service Bulletin/Repair InstructionsSUSPENSION:FRONT:SHOCK ABSORBER; EQUIPMENT:MECHANICAL:INTEGRATED JACK/LEVELER/STABILIZER; SUSPENSION:REAR:SHOCK ABSORBER
- Mfr Comm. #:
- 17-005-13
- Date Added:
- July 18, 2022
- Manufacturer:
- JEEP
SummaryThis bulletin involves verifying and if necessary replacing the right and left rear shock absorbers. Rattle and/or clunk noise from the rear of the vehicle equipped with load leveling suspension.
Associated Products (3)Associated Documents - April 3, 2013•Document ID: 10188642Service Bulletin/Repair InstructionsSUSPENSION; EQUIPMENT
- Mfr Comm. #:
- 17-005-13
- Date Added:
- March 15, 2021
- Manufacturer:
- DODGE
SummaryThis bulletin involves verifying and if necessary replacing the right and left rear shock absorbers. Rattle and/or clunk noise from the rear of the vehicle equipped with load leveling suspension.
Associated Products (6)Associated Documents - April 3, 2013•Document ID: 10062983Service Bulletin/Repair InstructionsSUSPENSION:REAR:SHOCK ABSORBER
- Mfr Comm. #:
- 17-005-13
- Date Added:
- April 26, 2016
- Manufacturer:
- DODGE
SummarySUMMARY TO BE PROVIDED ON A FUTURE DATE.
Associated Products (6)Associated Documents - March 27, 2013•Document ID: 10216458Service Bulletin/Repair InstructionsBACK OVER PREVENTION; POWER TRAIN
- Mfr Comm. #:
- 9002877
- Date Added:
- July 25, 2022
- Manufacturer:
- JEEP
Summary52124768A$ - Bearing Assy - Rear For any noise related issue, before replacing this part please review and follow the updated "Hub & Bearing Noise Diagnostic Procedure", found in STAR News #75 and in Service Manual. See DealerCONNECT>TechCONNECT>Service Info>Rear Susp>Hub and Bearing>Diagnosis and Testing>Diagnosis and Testing - Hub and Bearing - Noise.
Associated Products (8)Associated Documents - March 27, 2013•Document ID: 10136528Service Bulletin/Repair InstructionsSUSPENSION:REAR
- Mfr Comm. #:
- 9002877
- Date Added:
- May 14, 2018
- Manufacturer:
- JEEP
Summary52124768A$ - Bearing Assy - Rear For any noise related issue, before replacing this part please review and follow the updated "Hub & Bearing Noise Diagnostic Procedure", found in STAR News #75 and in Service Manual. See DealerCONNECT>TechCONNECT>Service Info>Rear Susp>Hub and Bearing>Diagnosis and Testing>Diagnosis and Testing - Hub and Bearing - Noise.
Associated Products (8)Associated Documents - March 27, 2013•Document ID: 10129012Service Bulletin/Repair InstructionsSUSPENSION:FRONT:HUB
- Mfr Comm. #:
- 9002877
- Date Added:
- February 21, 2018
- Manufacturer:
- JEEP
Summary52124768A$ - Bearing Assy - Rear For any noise related issue, before replacing this part please review and follow the updated "Hub & Bearing Noise Diagnostic Procedure", found in STAR News #75 and in Service Manual. See DealerCONNECT>TechCONNECT>Service Info>Rear Susp>Hub and Bearing>Diagnosis and Testing>Diagnosis and Testing - Hub and Bearing - Noise.
Associated Products (8)Associated Documents - March 20, 2013•Document ID: 10129008Service Bulletin/Repair InstructionsEQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
- Mfr Comm. #:
- 9002519
- Date Added:
- February 21, 2018
- Manufacturer:
- DODGE
Summary82212076, 82203694 - Fabric Cleaner This "fabric cleaner" is not intended for sale in California, the otc states (Connecticut, Delaware, Massachusetts, Maine, New Hampshire, New Jersey, New York, Pennsylvania, Virginia, and Washington dc), and some ladco states (Illinois, Michigan, and Ohio). Mopar offers an alternative product (82213192) which is a water based product approved for sale in the aforementioned states.~ ~ Please inform the customer & your prep dept that spraying excessive amounts of the fabric protector on load floors will result in the breaking down of the adhesive (glue) that is used to create the bond between the fabric (carpet) and the load floor. This will apply to any vehicles equipped with rear load floors such as WK, WD, PM, MK, KA, KK. The carpet will appear to be loose, wrinkly, or bunch up~
Associated Products (456)2018 Alfa Romeo Stelvio2018 Chrysler 2002018 Chrysler Pacifica2018 Dodge Challenger2018 Dodge Charger2018 Dodge Durango2018 Dodge Grand Caravan2018 Jeep Cherokee2018 Jeep Compass2018 Jeep Grand Cherokee2018 Ram 15002018 Ram 25002018 Ram 35002018 Ram 45002018 Ram 55002017 Chrysler 2002017 Chrysler 3002017 Chrysler 300C2017 Chrysler Pacifica2017 Chrysler Town and Country+ 436 moreAssociated Documents - March 19, 2013•Document ID: 10216444Service Bulletin/Repair InstructionsBACK OVER PREVENTION; ELECTRONIC STABILITY CONTROL:AUTOMATIC (ASC); ELECTRICAL SYSTEM; EQUIPMENT
- Mfr Comm. #:
- 08-017-13
- Date Added:
- July 25, 2022
- Manufacturer:
- JEEP
SummaryFlash: Vehicle Theft Alarm Intermittently Sounds This bulletin involves reprogramming the Intrusion module with new software and adding double sided tape to secure the module. The customer may experience the theft alarm siren turning on for no reason.This could be caused by the overhead console not retaining the intrusion module in place as well as it should. With the module not properly secured and with temperature changes, the wiring stiffens and relaxes moving the module. This set?s off the alarm. Reprogramming the module is to improve sensor stability that makes it less sensitive to movement. Adding tape to the module prevents movement.
Associated Products (2)Associated Documents - March 19, 2013•Document ID: 10216442Service Bulletin/Repair InstructionsPOWER TRAIN
- Mfr Comm. #:
- 18-014-13
- Date Added:
- July 25, 2022
- Manufacturer:
- JEEP
SummaryFlash: MIL Illumination P0108- Manifold Absolute Pressure Sensor Circuit High This bulletin involves selectively erasing and reprogramming the Powertrain Control Module (PCM) with new software. A small number of customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the Technician may find that the following Diagnostic Trouble Code has been set: P0108- Manifold Absolute Pressure Sensor Circuit High
Associated Products (2)Associated Documents - March 19, 2013•Document ID: 10136514Service Bulletin/Repair InstructionsEQUIPMENT:ELECTRICAL:ANTI-THEFT DEVICES
- Mfr Comm. #:
- 08-017-13
- Date Added:
- May 14, 2018
- Manufacturer:
- JEEP
SummaryFlash: Vehicle Theft Alarm Intermittently Sounds This bulletin involves reprogramming the Intrusion module with new software and adding double sided tape to secure the module. The customer may experience the theft alarm siren turning on for no reason.This could be caused by the overhead console not retaining the intrusion module in place as well as it should. With the module not properly secured and with temperature changes, the wiring stiffens and relaxes moving the module. This set?s off the alarm. Reprogramming the module is to improve sensor stability that makes it less sensitive to movement. Adding tape to the module prevents movement.
Associated Products (2)Associated Documents - March 19, 2013•Document ID: 10136512Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING:EXHAUST SYSTEM:MANIFOLD/HEADER/MUFFLER/TAIL PIPE; POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM)
- Mfr Comm. #:
- 18-014-13
- Date Added:
- May 14, 2018
- Manufacturer:
- JEEP
SummaryFlash: MIL Illumination P0108- Manifold Absolute Pressure Sensor Circuit High This bulletin involves selectively erasing and reprogramming the Powertrain Control Module (PCM) with new software. A small number of customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the Technician may find that the following Diagnostic Trouble Code has been set: P0108- Manifold Absolute Pressure Sensor Circuit High
Associated Products (2)Associated Documents - March 19, 2013•Document ID: 10128998Service Bulletin/Repair InstructionsELECTRICAL SYSTEM:SOFTWARE
- Mfr Comm. #:
- 08-017-13
- Date Added:
- February 21, 2018
- Manufacturer:
- JEEP
SummaryFlash: Vehicle Theft Alarm Intermittently Sounds This bulletin involves reprogramming the Intrusion module with new software and adding double sided tape to secure the module. The customer may experience the theft alarm siren turning on for no reason.This could be caused by the overhead console not retaining the intrusion module in place as well as it should. With the module not properly secured and with temperature changes, the wiring stiffens and relaxes moving the module. This set?s off the alarm. Reprogramming the module is to improve sensor stability that makes it less sensitive to movement. Adding tape to the module prevents movement.
Associated Products (2)Associated Documents - March 19, 2013•Document ID: 10128996Service Bulletin/Repair InstructionsPOWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM)
- Mfr Comm. #:
- 18-014-13
- Date Added:
- February 21, 2018
- Manufacturer:
- DODGE
SummaryFlash: MIL Illumination P0108- Manifold Absolute Pressure Sensor Circuit High This bulletin involves selectively erasing and reprogramming the Powertrain Control Module (PCM) with new software. A small number of customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the Technician may find that the following Diagnostic Trouble Code has been set: P0108- Manifold Absolute Pressure Sensor Circuit High
Associated Products (2)Associated Documents - March 19, 2013•Document ID: 10068537Service Bulletin/Repair InstructionsELECTRICAL SYSTEM:SOFTWARE
- Mfr Comm. #:
- 18-014-13
- Date Added:
- June 2, 2016
- Manufacturer:
- JEEP
SummarySUMMARY TO BE PROVIDED ON A FUTURE DATE.
Associated Products (2)Associated Documents - March 19, 2013•Document ID: 10068527Service Bulletin/Repair InstructionsELECTRICAL SYSTEM:SOFTWARE
- Mfr Comm. #:
- 08-017-13
- Date Added:
- June 2, 2016
- Manufacturer:
- JEEP
SummarySUMMARY TO BE PROVIDED ON A FUTURE DATE.
Associated Products (2)Associated Documents - March 1, 2013•Document ID: 10216265Service Bulletin/Repair InstructionsEQUIPMENT; ENGINE AND ENGINE COOLING; SUSPENSION:REAR:SPRINGS:AIR SUSPENSION SYSTEM; ELECTRONIC STABILITY CONTROL:AUTOMATIC (ASC)
- Mfr Comm. #:
- 17-004-13
- Date Added:
- July 25, 2022
- Manufacturer:
- JEEP
SummaryCleaning Of Rear Air Suspension At Every Engine Oil Change This bulletin involves cleaning the left and right side rear air spring bellows and piston area at the lower control arm pocket in the rear of the vehicle. Rear suspension air springs may become damaged due to abrasion from road debris or the air spring can become punctured due to ice/snow build-up at bottom of piston at lower control arm.
Associated Products (4)Associated Documents