Chevrolet · Model Report
Showing safety data for the 1983 model year only.
CERTAIN REPLACEMENT FUEL FILTERS, FRAM BRAND NAME P/N G3727, WITH DATE CODES X52911 THROUGH X60801 SEQUENTIALLY OR X600141 AND A MEXICO COUNTRY OR ORIGIN MARKING ON THE FUEL FILTER HOUSING MANUFACTURED FROM OCTOBER 18, 2005, THROUGH MARCH 21, 2006, SOLD FOR USE ON THE VEHICLES LISTED ABOVE AND ON CERTAIN SCHOOL BUSES. (TO SEE THE SCHOOL BUS ENGINE SIZES, CLICK ON "DOCUMENT SEARCH" AND THEN "BUS APPLICATIONS"). THE CONNECTOR ON THE FUEL FILTER WAS NOT MANUFACTURED TO HONEYWELL'S SPECIFICATION. AS A RESULT, THE O-RING MAY NOT SEAT CORRECTLY ON THE FUEL LINE.
INTERNAL CORROSION OF PULSAIR CHECK VALVE ASSEMBLY COULD PERMIT EXHAUST GAS TO MELT THE PLASTIC SHUT OFF VALVE AND DRAW VALVE PIECES INTO THE AIR CLEANER AND THROTTLE BODY.
THE METAL FLOOR PAN ANCHOR BAR COULD FATIGUE AND BREAK AROUND THE LEFT FRONT OUTER SEAT ADJUSTER STUD OF THE DRIVERS SEAT, ALLOWING THE STUD TO SEPARATE FROM THE FLOOR PAN ANCHOR BAR.
THE BRAKE PROPORTIONER VALVES MAY BREAK AND SEPARATE FROM THE MASTER CYLINDER. THIS WOULD ALLOW BRAKE FLUID TO LEAK AND WOULD RESULT IN A PARTIAL LOSS OF THE BRAKE SYSTEM.
THE LEFT FRONT SUSPENSION CONTROL ARM WHICH SUPPORTS THE FRONT WHEEL, BRAKE AND STEERING ASSEMBLY, MAY COME LOOSE AT ITS MOUNTING BRACKET. THIS IS DUE TO POSSIBLE INADEQUATE WELDING OF THE BRACKET.
THE ENGINE OVERHEATED AND FLAMES BEGAN TO COME FROM UNDER THE HOOD, THE PLASTIC OVERFLOW TANK WAS MELTED AND THE PLASTIC CAP MELTED. (OHIO TRAFFIC CRASH REPORT) NLM
#2 PISTON BROKE BETWEEN OIL RING SLOT AND COMPRESSION RING SLOT CAUSING ENGINE FAILURE.
No injuries · No fire · No crash
PLASTIC VALVE MELTED/LODGED AGAINST THE THROTTLE PLATE, CAUSING LOSS OF ACCELERATOR CONTROL PRIOR TO RECALL, RECALL REPAIRS REFUSED.
No injuries · No fire · No crash