CAN-AM Spyder Service Bulletins (2013)
80 manufacturer communications on file.
- October 25, 2013•Document ID: 10129604Service Bulletin/Repair InstructionsENGINE
- Mfr Comm. #:
- Article 10-25
- Date Added:
- March 5, 2018
- Manufacturer:
- CAN-AM
SummaryTechnical Service Tip (TST) addressing that on some SE5 engines a high pitched or whining noise may be heard under specific RPM only. After investigation the cause of this noise is from a thrust washer vibrating and spinning in the HCM. Inspection of the HCM housing for wear is proposed; it may need to be replaced.
Associated Products (6)Associated Documents - October 22, 2013•Document ID: 10191376Service Bulletin/Repair InstructionsEQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC.
- Mfr Comm. #:
- Article Radio 10
- Date Added:
- May 3, 2021
- Manufacturer:
- CAN-AM
SummaryIf a customer wants to change the radio pre-set channel number and is unable to do so, here is the reason this is happening.
Associated Products (14)Associated Documents - October 22, 2013•Document ID: 10129607Service Bulletin/Repair InstructionsEQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC.
- Mfr Comm. #:
- Article 10-22
- Date Added:
- March 5, 2018
- Manufacturer:
- CAN-AM
SummaryTechnical service Tip (TST) informing dealers that if a customer wants to change the radio pre-set channel number and is unable to do so, this has been identified as being caused by the radio data system (RDS) refresh rate bringing the pre-set channel back to its original #. At this time there is no solution to this issue. Replacement of parts is not the solution.
Associated Products (1)Associated Documents - October 22, 2013•Document ID: 10129606Service Bulletin/Repair InstructionsELECTRICAL SYSTEM:SOFTWARE
- Mfr Comm. #:
- Article Radio di
- Date Added:
- March 5, 2018
- Manufacturer:
- CAN-AM
SummaryTechnical Service Tip (TST) informing dealers that It has been brought to BRP's attention that in some cases the radio station display option in the cluster will revert to "no display" after a few days. BRP is looking into the situation. This issue has been identified as a software problem between the cluster and the radio module. At this time replacement of parts is not the solution since they all have the problem.
Associated Products (4)Associated Documents - September 4, 2013•Document ID: 10126530Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- Letters 2013-8
- Date Added:
- December 22, 2017
- Manufacturer:
- CAN-AM
SummaryLetters to dealers and customers informing them of the 2013-8 warranty bulletin issued on August 30th regarding Tandem Master Cylinder Manifold Inlet - Fire Hazard.
Associated Products (1)Associated Documents - September 4, 2013•Document ID: 10125482Service Bulletin/Repair InstructionsEQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL; ELECTRICAL SYSTEM
- Mfr Comm. #:
- Letters 2013-8
- Date Added:
- December 14, 2017
- Manufacturer:
- CAN-AM
SummaryLetters to dealers and customers informing them of the 2013-8 warranty bulletin issued on August 30th regarding Tandem Master Cylinder Manifold Inlet - Fire Hazard.
Associated Products (1)Associated Documents - September 3, 2013•Document ID: 10126529Service Bulletin/Repair InstructionsEQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
- Mfr Comm. #:
- Posting 09-03
- Date Added:
- December 22, 2017
- Manufacturer:
- CAN-AM
SummaryPosting informing the community that BRP has been investigating multiple issues with 2013 units and it has come up with a number of solutions. Technical service tips (TST) has been made to assist with diagnostics. TST also goes over numerous campaigns and bulletins.
Associated Products (1)Associated Documents - September 3, 2013•Document ID: 10125481Service Bulletin/Repair InstructionsEQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
- Mfr Comm. #:
- Posting 09-03
- Date Added:
- December 14, 2017
- Manufacturer:
- CAN-AM
SummaryPosting informing the community that BRP has been investigating multiple issues with 2013 units and it has come up with a number of solutions. Technical service tips (TST) has been made to assist with diagnostics. TST also goes over numerous campaigns and bulletins.
Associated Products (1)Associated Documents - August 30, 2013•Document ID: 10124113Service Bulletin/Repair InstructionsSERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:MASTER CYLINDER
- Mfr Comm. #:
- Bulletin 2013-9
- Date Added:
- November 17, 2017
- Manufacturer:
- CAN-AM
SummaryService bulletin informing dealers that a new procedure has been developed to improve the replacement of the tandem master cylinder (TMC) without the necessity of bleeding the whole brake system.
Associated Products (6)Associated Documents - August 30, 2013•Document ID: 10124111Service Bulletin/Repair InstructionsEQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
- Mfr Comm. #:
- Posting 08-1
- Date Added:
- November 17, 2017
- Manufacturer:
- CAN-AM
SummaryPosting informing the community that Transport Canada published a recall notice from BRP. Agencies in other countries are also reviewing the solution for their own jurisdictions, including NHTSA in the United States.
Associated Products (1)Associated Documents - July 17, 2013•Document ID: 10126528Service Bulletin/Repair InstructionsSUSPENSION
- Mfr Comm. #:
- 2013-7
- Date Added:
- December 22, 2017
- Manufacturer:
- CAN-AM
SummaryWarranty bulletin addressing a possible front shocks dampening issues. Some vehicles may have been produced with shock absorbers without enough dampening. The proposed solution is to replace both front shocks if problem is encountered.
Associated Products (1)Associated Documents - July 17, 2013•Document ID: 10125480Service Bulletin/Repair InstructionsSUSPENSION; SUSPENSION:FRONT:SHOCK ABSORBER
- Mfr Comm. #:
- 2013-7
- Date Added:
- December 14, 2017
- Manufacturer:
- CAN-AM
SummaryWarranty bulletin addressing a possible front shocks dampening issues. Some vehicles may have been produced with shock absorbers without enough dampening. The proposed solution is to replace both front shocks if problem is encountered.
Associated Products (1)Associated Documents - July 15, 2013•Document ID: 10126527Service Bulletin/Repair InstructionsSUSPENSION
- Mfr Comm. #:
- 2013-6R1
- Date Added:
- December 22, 2017
- Manufacturer:
- CAN-AM
SummaryRevision #1 of warranty bulletin 2013-6 addressing the issue that some vehicles have been produced with weak stabilizer bar link rods. Remove and inspect each link rod to find their production number. Replace if production number shows a "4", as CCVI 4 WITHOUT a painted dot.
Associated Products (1)Associated Documents - July 15, 2013•Document ID: 10125479Service Bulletin/Repair InstructionsEQUIPMENT
- Mfr Comm. #:
- 2013-6R1
- Date Added:
- December 14, 2017
- Manufacturer:
- CAN-AM
SummaryRevision #1 of warranty bulletin 2013-6 addressing the issue that some vehicles have been produced with weak stabilizer bar link rods. Remove and inspect each link rod to find their production number. Replace if production number shows a "4", as CCVI 4 WITHOUT a painted dot.
Associated Products (1)Associated Documents - July 3, 2013•Document ID: 10126526Service Bulletin/Repair InstructionsSUSPENSION
- Mfr Comm. #:
- 2013-5
- Date Added:
- December 22, 2017
- Manufacturer:
- CAN-AM
SummaryWarranty bulletin addressing a possible front shocks dampening issue. Some vehicles may have been produced with shock absorbers without enough dampening. The proposed solution is to replace both front shocks if problem is encountered.
Associated Products (1)Associated Documents - July 3, 2013•Document ID: 10125478Service Bulletin/Repair InstructionsSUSPENSION:FRONT:SHOCK ABSORBER
- Mfr Comm. #:
- 2013-5
- Date Added:
- December 14, 2017
- Manufacturer:
- CAN-AM
SummaryWarranty bulletin addressing a possible front shocks dampening issue. Some vehicles may have been produced with shock absorbers without enough dampening. The proposed solution is to replace both front shocks if problem is encountered.
Associated Products (1)Associated Documents - June 28, 2013•Document ID: 10054443Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- TBG-2013-006
- Date Added:
- January 27, 2014
- Manufacturer:
- CAN-AM
SummaryCAN-AM (BRP): INFORMATION CONCERNING THE VEHICLE CONTROL MODULE. THE CALIBRATION MAY BE CORRUPTED. THIS CAN CAUSE THE VEHICLE TO STOP WORKING, E WILL BE DISPLAYED IN THE GAUGE INSTEAD OF THE GEAR POSITION, AND NO COMMUNICATION WILL BE POSSIBLE WITH THE VEHICLE CONTROL MODULE USING THE DIAGNOSTIC TOOL. MODEL: COMMANDER ELECTRIC MODEL YEAR 2013. *JS
Associated Products (2)Associated Documents - June 27, 2013•Document ID: 10120761Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- Posting PO2017
- Date Added:
- October 25, 2017
- Manufacturer:
- CAN-AM
SummaryPosting discussing a possible solution for the Engine coolant over temperature condition, that will be added to the TST.
Associated Products (1)Associated Documents - June 27, 2013•Document ID: 10120760Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- Posting PO2017(2
- Date Added:
- October 25, 2017
- Manufacturer:
- CAN-AM
SummaryPosting discussing the Technical Service Tip (TST) about a diagnostic trouble code - Engine coolant over temperature condition.
Associated Products (1)Associated Documents - June 26, 2013•Document ID: 10120759Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- Article DTC P021
- Date Added:
- October 25, 2017
- Manufacturer:
- CAN-AM
SummaryTechnical Service Tip (TST) addressing a diagnostic trouble code - Engine coolant over temperature condition.
Associated Products (1)Associated Documents