BMW X1 Service Bulletins
556 manufacturer communications on file.
- May 1, 2013•Document ID: 10149593Service Bulletin/Repair InstructionsPOWER TRAIN; ELECTRICAL SYSTEM
- Mfr Comm. #:
- 270212
- Date Added:
- November 26, 2018
- Manufacturer:
- BMW
Summary"The warning lamps for DSC, ABS and brake warning are illuminated. There may also be a warning in the control display for ""Chassis Control System failure."" One or more of the following fault codes are stored: DSC: * D36D44 - Signal error longitudinal torque distribution (LMV) * 48097D - Transfer Case clutch position open F01, F02, F07, F10, F12 and F13 LMV: * 440108 - Control Unit internal error * 44010F - Control Unit internal error E70, E71 and E84 LMV: * 5219 - Control Unit: EEPROM Writing-reading-error * 522D - Control Unit: internal Error CAUSE Software calibration error in the LMV"
Associated Products (39)Associated Documents - May 1, 2013•Document ID: 10149581Service Bulletin/Repair InstructionsENGINE
- Mfr Comm. #:
- 120513
- Date Added:
- November 26, 2018
- Manufacturer:
- BMW
SummaryService Engine Soon Light Flashes with Throttle Adaptation Faults Stored. The EML light flashes with a check control message for reduced power output and/or the Service Engine Soon lamp (MIL) flashes. During the throttle valve adaptation (teach-in limit run), faults may occur due to signal voltage oscillations. This could lead to a termination of the teach-in routine or an incorrect value taught in at the lower limit. The following faults can be stored in the DME memory: E82, E84, E88, E89, E92, and E93 BN2000 vehicles * 28D0: throttle valve, adaptation: Initial adaptation, lower limit not taught in * 28D4: throttle valve, adaptation: Subsequent teach-in, lower limit not taught in * 28C4: throttle valve, adaptation: Emergency air position not adapted * 28A0: throttle valve angle - Intake manifold absolute comparison: pressure too high ??3166: Tank-ventilation system: fault F01, F02, F06, F07, F10, F12, F13, F30, F31, and ALPINA B7 BN2020 vehicles: * 101408: throttle valve, adaptation: Initial adaptation, lower limit not taught in * 107AE0: throttle valve, adaptation: Subsequent teach-in, lower limit not taught in * 101402: throttle valve, adaptation: Emergency air position not adapted * 101F01: throttle valve angle - Intake manifold absolute comparison: pressure too high ??190F08: Tank-ventilation system: fault Sensitivity of the throttle valve sensor (only affects parts installed during this production period)
Associated Products (38)Associated Documents - May 1, 2013•Document ID: 10052365Service Bulletin/Repair InstructionsEXTERIOR LIGHTING:BRAKE LIGHTS; SERVICE BRAKES, AIR:DISC; SERVICE BRAKES, AIR:ANTILOCK:ABS WARNING LIGHT
- Mfr Comm. #:
- SIB-34-06-12
- Date Added:
- July 18, 2013
- Manufacturer:
- BMW
SummaryBMW: WARNING LAMPS ARE ILLUMINATED FOR THE DSC, ABS AND BRAKE AND A POSSIBLE WARNING IN CONTROL DISPLAY FOR CHASSIS CONTROL SYSTEM FAILURE. MODELS 2012 F25, 30, 01, 02, 07, 10, 12, 13, E70, 71, 84. *PE
Associated Products (10)Associated Documents - May 1, 2013•Document ID: 10052356Service Bulletin/Repair InstructionsENGINE; ELECTRICAL SYSTEM
- Mfr Comm. #:
- SIB-12-05-13
- Date Added:
- July 17, 2013
- Manufacturer:
- BMW
SummaryBMW: SERVICE ENGINE SOON LAMP FLASHES OR EML LIGHT FLASHERS WITH CHECK CONTROL MESSAGE TO REDUCED POWER OUTPUT. MODELS 2013 E82, 84, 88, 89, 92, 93, F01, 02, 06, 07, 10, 12, 13, 30, 31. *PE
Associated Products (1)Associated Documents - March 1, 2013•Document ID: 10150130Service Bulletin/Repair InstructionsEQUIPMENT:ELECTRICAL:NAVIGATIONAL SYSTEM(GLOBAL POSITIONING SYSTEM); EQUIPMENT
- Mfr Comm. #:
- 651009
- Date Added:
- December 3, 2018
- Manufacturer:
- BMW
SummaryThe vehicle position is missing or incorrect on the navigation map. The navigation system integrated in the Car Information Computer (CIC) is not calibrated correctly.
Associated Products (173)Associated Documents - March 1, 2013•Document ID: 10150109Service Bulletin/Repair InstructionsVISIBILITY
- Mfr Comm. #:
- 510613
- Date Added:
- December 3, 2018
- Manufacturer:
- BMW
SummaryDriver's Door Mirror Adjustment Range Not Sufficient. The driver's door mirror inward travel is not sufficient. CAUSE The mirror glass carrier inward bump stop is too high and limits the inward travel.
Associated Products (3)Associated Documents - March 1, 2013•Document ID: 10150096Service Bulletin/Repair InstructionsPOWER TRAIN; ENGINE
- Mfr Comm. #:
- 121611
- Date Added:
- December 3, 2018
- Manufacturer:
- BMW
SummaryN55 Engine Failsafe - FC 120308 Boost Pressure Control, Plausibility: Pressure Too Low Stored in DME Fault Memory. INFORMATION The customer complains the SES is illuminated and the engine has reduced power (engine failsafe mode).
Associated Products (134)Associated Documents - March 1, 2013•Document ID: 10052012Service Bulletin/Repair InstructionsELECTRICAL SYSTEM:12V/24V/48V BATTERY
- Mfr Comm. #:
- SIB-61-13-05
- Date Added:
- May 1, 2013
- Manufacturer:
- BMW
SummaryBMW: BATTERY HAS AN INCREASED DEMAND DUE TO DEVELOPEMENTAL PROCESS OF THE ELECTRICAL SYSTEM. THIS IS CAUSING THE BATTER TO NEED TO UNDERGO AN ENERGY DIAGNOSIS. *KB
Associated Products (60)Associated Documents - March 1, 2013•Document ID: 10041407Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING:ENGINE
- Mfr Comm. #:
- SIB-12-16-11
- Date Added:
- September 30, 2011
- Manufacturer:
- BMW
SummaryBMW: SERVICE ENGINE SOON LIGHT IS ON AND THE ENGINE HAS REDUCED POWER WITH TROUBLE CODES STORED. *RM UPDATED ON 4/24/2013. *KB
Associated Products (23)Associated Documents - February 1, 2013•Document ID: 10149434Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; VISIBILITY
- Mfr Comm. #:
- 510113
- Date Added:
- November 26, 2018
- Manufacturer:
- BMW
SummaryDoor Mirror Heating Not Working Properly. Mirror heating has no effect or works intermittently. CAUSE Door mirror software error This only affects E84 LCI models with option code: * 430 (Auto dimming door mirror) and /or * 459 (Electric seat adjustment with memory)
Associated Products (2)Associated Documents - February 1, 2013•Document ID: 10149427Service Bulletin/Repair InstructionsENGINE
- Mfr Comm. #:
- 111212
- Date Added:
- November 26, 2018
- Manufacturer:
- BMW
SummaryN20 Engine: Engine Oil Filter Application. INFORMATION The current version of EPC does not provide all available options for the engine oil filters that are used in the N20 engine. The illustrations below will help identify the proper engine oil filter application until the EPC is corrected. Vehicles produced prior to 6/2012 will be equipped with a black plastic oil filter housing (1). In this case, engine oil filter kit P/N 11 42 7 634 291 should be used. Vehicles produced as of 6/2012 and later will be equipped with a silver aluminum oil filter housing (1). In this case, engine oil filter kit P/N 11 42 7 640 862 should be used.
Associated Products (41)Associated Documents - January 1, 2013•Document ID: 10149293Service Bulletin/Repair InstructionsENGINE
- Mfr Comm. #:
- 111012
- Date Added:
- November 26, 2018
- Manufacturer:
- BMW
Summary?N20 Engine: Repeated Juddering or Surging While Accelerating. The vehicle judders or surges repeatedly while accelerating in hot ambient temperatures between 3,000 RPM and 5,000 RPM. The Service Engine Soon lamp is not illuminated, and no fault codes are stored in the vehicle memory related to this complaint. CAUSE The EPDW (electropneumatic pressure convertor) for the turbocharger wastegate valve is binding internally.
Associated Products (41)Associated Documents - December 1, 2012•Document ID: 10150391Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- 660812
- Date Added:
- December 3, 2018
- Manufacturer:
- BMW
SummaryRear Park Distance Control Does Not Work. When the reverse gear is selected or the PDC button is pressed, the rear PDC sensors do not work and, at times, there is no check control messages displayed. CAUSE Water ingresses into the PDC sensor. This is because the wire connection for the driver's side rear outer PDC sensor is not protected from water, dirt and other foreign materials kicked up by the driver's side rear wheel.
Associated Products (2)Associated Documents - December 1, 2012•Document ID: 10150389Service Bulletin/Repair InstructionsEQUIPMENT
- Mfr Comm. #:
- 652212
- Date Added:
- December 3, 2018
- Manufacturer:
- BMW
SummaryService Action: CIC - Install Navigation Road Map Database 2013. The Car Information Computer (CIC) road map database 2013 must be installed onto the CIC internal Hard Disc Drive (HDD).
Associated Products (70)Associated Documents - December 1, 2012•Document ID: 10150379Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- 513312
- Date Added:
- December 3, 2018
- Manufacturer:
- BMW
Summary"Instrument Cluster Warning Displays Picture of Tailgate Open. The ""Tailgate open"" icon is displayed even though the tailgate is closed. The display icon may also illuminate when the engine is started. CAUSE The noise suppression filter for the aerial is faulty. Note: Replacing the JBE will not correct this issue."
Associated Products (2)Associated Documents - October 1, 2012•Document ID: 10150334Service Bulletin/Repair InstructionsEQUIPMENT
- Mfr Comm. #:
- 651512
- Date Added:
- December 3, 2018
- Manufacturer:
- BMW
Summary"Service Action: CIC - Install Navigation Road Map Database 2013. Before delivering affected vehicles to the customer, the Car Information Computer (CIC) road map database 2013 must be installed onto the CIC internal Hard Disc Drive (HDD). Note: The INITIAL enabling code ""FSC CIC map, N. America 2013 INITIAL"" is necessary to start the installation process and to activate the road map database."
Associated Products (70)Associated Documents