BMW 335i Service Bulletins
690 manufacturer communications on file.
- June 1, 2013•Document ID: 10150078Service Bulletin/Repair InstructionsEQUIPMENT:ELECTRICAL; EQUIPMENT
- Mfr Comm. #:
- 651613
- Date Added:
- December 3, 2018
- Manufacturer:
- BMW
SummaryHeadunit Basic: Intermittently No AM Radio Reception. The Headunit Basic (HU-B), also called Radio Professional or ENTRY head unit, intermittently does not have AM radio reception after starting the vehicle when left in AM mode. * Only hissing or static noise can be heard * AM radio stations are correctly displayed Proper function can be restored by switching to FM mode and back to AM mode. No fault code is stored in the head unit. Software issue in the HU-B
Associated Products (11)Associated Documents - June 1, 2013•Document ID: 10150076Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL
- Mfr Comm. #:
- 620613
- Date Added:
- December 3, 2018
- Manufacturer:
- BMW
SummaryCondition Based Service Due Date Is Reset to 01/2000. The Condition Based Service (CBS) due date is reset to 01/2000 and cannot be updated for: * Oil Service * Check Vehicle Note: No fault code is stored Software error in the Instrument Cluster
Associated Products (70)Associated Documents - June 1, 2013•Document ID: 10150074Service Bulletin/Repair InstructionsLATCHES/LOCKS/LINKAGES; ELECTRICAL SYSTEM
- Mfr Comm. #:
- 511907
- Date Added:
- December 3, 2018
- Manufacturer:
- BMW
SummaryDoors Will Not Unlock Using the Key Fob or Central Locking Button. One or more of the doors may not unlock when using the remote key outside the vehicle, or the central locking button inside the car. It is still possible, however, to unlock the door by using the key in the driver's door lock cylinder or by pulling the door handle on the inside of the car. Typically fault codes A6D4 and A6D5 are stored in the Junction Box Electronics (JBE). This is due to a blown fuse in the JBE caused by either: * An excessive amperage draw by one of the door lock actuators, which is commonly attributed to silicone contamination; or * An intermittent, but acceptable, amperage spike slightly above 15A, due to normal variation in the locking system.
Associated Products (18)Associated Documents - June 1, 2013•Document ID: 10150065Service Bulletin/Repair InstructionsENGINE; EQUIPMENT; EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
- Mfr Comm. #:
- 010212
- Date Added:
- December 3, 2018
- Manufacturer:
- BMW
Summary"BMW NA has agreed to extend the emissions warranties of the turbocharger's wastegate to: ??8 years or 82,000 miles, whichever occurs first, as determined from the vehicle's original in-service date select the ""Vehicle Comment"" button to display the extended coverage information. The terms of the original New Vehicle/SAV Limited Warranty and applicable emissions warranty still apply. BMW NA will not provide warranty coverage to any Settlement Class Member's vehicle containing modifications or alterations to the turbocharger or its wastegates (software, hardware or otherwise), or evidencing other conditions not normally covered under the original New Vehicle/SAV Limited Warranty or applicable emissions warranty. Modifications excluded from warranty coverage include any aftermarket parts that affect the turbocharger system, or if there are other conditions that would normally exclude it from warranty coverage."
Associated Products (92)Associated Documents - June 1, 2013•Document ID: 10052615Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING:ENGINE:OTHER FUEL TYPES:TURBO/SUPERCHARGER; ENGINE AND ENGINE COOLING:ENGINE:GASOLINE:TURBO/SUPERCHARGER; EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
- Mfr Comm. #:
- SIB-01-02-12
- Date Added:
- August 21, 2013
- Manufacturer:
- BMW
SummaryBMW: ON CERTAIN VEHICLES, AN EMISSIONS WARRANTY HAS BEEN EXTENDED TO 8 YEARS/82,00 MILES ON ENGINE TURBOCHARGER WASTEGATE. MODELS 2008-2010 E60, E61, E71, E82, E88, AND 2009-2010 E89, AND 2007-2010 E90, E92, E93. *PE
Associated Products (15)Associated Documents - May 1, 2013•Document ID: 10149618Service Bulletin/Repair InstructionsEQUIPMENT
- Mfr Comm. #:
- 840613
- Date Added:
- November 26, 2018
- Manufacturer:
- BMW
SummaryiPhone Charging Status Constantly Switches On and Off. Do not replace any other parts! Advise the customer that he/she must use one of the following: * The original Apple iPhone/iPOD USB cable that came with the device * A BMW supplied iPhone/iPOD USB adapter cable PARTS INFORMATION Part Number
Associated Products (72)Associated Documents - May 1, 2013•Document ID: 10149617Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- 840513
- Date Added:
- November 26, 2018
- Manufacturer:
- BMW
SummaryTCB: Emergency Call Is Erroneously Triggered. An emergency call is erroneously made with no input from the driver. The following fault codes are stored in the TCB: * 0xB7F325 - Emergency call loud speaker: break in circuit * 0xB7F319 - Emergency call button: short circuit * 0xB7F326 - Emergency call loud speaker: short circuit to earth * 0xB7F33E - Automatic emergency call triggered frequently CAUSE TCB control unit error
Associated Products (51)Associated Documents - May 1, 2013•Document ID: 10149616Service Bulletin/Repair InstructionsSEAT BELTS
- Mfr Comm. #:
- 720111
- Date Added:
- November 26, 2018
- Manufacturer:
- BMW
Summary"Safety Belt Extender ""Handover"" Fails to Deliver the Belt to the Customer. The customer states that the seat belt extender ""handover"" on the front driver's or passenger side failed to deliver the belt. One or more of the following situations may apply: * The safety belt extender extends but the belt slips off. * The ""hand"" on the extender fails. * The safety belt is twisted. * The extender will not operate and makes noise while extending. S One or more of the following causes may apply: 1. The safety belt is incorrectly positioned. 2. The ""hand"" on the extender has mechanically failed. 3. The safety belt slips off the ""hand"" due to excessive resistance from the seat belt reel, not allowing the belt to extend properly. The seat belt is twisted. 4. The safety belt slips off the ""hand"" due to the belt material being excessively worn. 5. The safety belt extender fails to extend or retract intermittently due to FRM (Footwell Module) software. 6. The safety belt extender is noisy or inoperative, due to a communication problem or incorrect power or ground."
Associated Products (27)Associated Documents - May 1, 2013•Document ID: 10149615Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- 660412
- Date Added:
- November 26, 2018
- Manufacturer:
- BMW
SummaryThe PDC system falsely detects obstacles on all front and rear sensors when no obstacles are present around the vehicle. Software error in the REM (Rear Electronic Module)
Associated Products (6)Associated Documents - May 1, 2013•Document ID: 10149613Service Bulletin/Repair InstructionsEQUIPMENT
- Mfr Comm. #:
- 651310
- Date Added:
- November 26, 2018
- Manufacturer:
- BMW
SummaryIn all audio modes (radio, CD, AUX-In, etc.), the audio output is distorted. It is more noticeable with high bass and high audio volume settings. There may also be an intermittent interference noise coming from the loudspeakers at low audio volume or when the radio is turned off. Audio settings in the RAD2+ (radio professional)
Associated Products (57)Associated Documents - May 1, 2013•Document ID: 10149609Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; EQUIPMENT:ELECTRICAL:NAVIGATIONAL SYSTEM(GLOBAL POSITIONING SYSTEM)
- Mfr Comm. #:
- 620513
- Date Added:
- November 26, 2018
- Manufacturer:
- BMW
SummaryHead-up Display: Navigation Information Is Not Displayed. The navigation system information (turn advice - arrow view) is no longer displayed on the Head-up Display (HUD). Turning the ignition on and off doesn't resolve the issue. Application error between the instrument cluster and the Head-up Display
Associated Products (11)Associated Documents - May 1, 2013•Document ID: 10149607Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- 613212
- Date Added:
- November 26, 2018
- Manufacturer:
- BMW
Summary"REM: Various Electrical Faults in Rear of a Vehicle. Various electrical faults associated with the rear of the vehicle occur, including one or more of the following: * The REM (Rear Electronic Module) does not respond to diagnosis. * The one-touch function of the rear power windows is inoperative. * The rear power windows cannot be initialized. * The trunk lid cannot be opened. * The brake lights are not working (check control message ""Left/right brake light failed"" is displayed). * The rear turn indicator lights are not working (check control message ""Rear left/right turn indicator failed"" is displayed). One or more of the following faults are stored in the REM: * ""804805 Internal software control unit fault"" * ""804876 Turn indicator, rear left, faulty"" * ""804877 Turn indicator, rear right, faulty"" * ""804872 Brake light, left, faulty"" * ""804874 Brake light, right, faulty"" * ""30195 Window regulator, passenger's side door, rear: invalid characteristic curve, no normalization present"" * ""30115 Power window, rear door on driver's side: invalid characteristic curve, no normalization present"" * ""301A0 Window regulator on passenger's side door, rear: system is not normalized"" * ""30120 Power window, rear door on driver's side: system is not standardized"" CAUSE Rear power window drive(s) faulty"
Associated Products (6)Associated Documents - May 1, 2013•Document ID: 10149597Service Bulletin/Repair InstructionsAIR BAGS
- Mfr Comm. #:
- 340612
- Date Added:
- November 26, 2018
- Manufacturer:
- BMW
SummaryDSC Warning Light is On. The warning lamps for DSC, ABS and brake warning are illuminated. There may also be a warning in the control display for 'Chassis Control System failure' One or more of the following fault codes are stored: F25, F30 DSC * D36D44 - Signal error longitudinal torque distribution (LMV) * 48097D - Transfer Case clutch position open F01, F02, F07, F10, F12 and F13 LMV: * 440108 - Control Unit internal error * 44010F - Control Unit internal error E70, E71 and E84 LMV: * 5219 - Control Unit: EEPROM Writing-reading-error * 522D - Control Unit: internal Error CAUSE Software calibration error in the LMV
Associated Products (44)Associated Documents - May 1, 2013•Document ID: 10149595Service Bulletin/Repair InstructionsSERVICE BRAKES, HYDRAULIC
- Mfr Comm. #:
- 340208
- Date Added:
- November 26, 2018
- Manufacturer:
- BMW
SummaryErroneous Brake Pad Replacement Message. The Dynamic Stability Control module (DSC) calculates the brake pad replacement intervals based on information from the front and rear axle brake pad wear sensors. When replacement of the front and or rear brake pads is necessary, the DSC control module triggers an indicator lamp located in the vehicle's instrument cluster. However, the brake pad indicator lamp may be illuminated although a replacement of the brake pads is not necessary. Additionally, one or both of the following fault codes may be stored in the DSC control module: * 5DE0 Brake-pad wear: plausibility, front axle * 5DE1 Brake-pad wear: plausibility, rear axle CAUSE DSC software error
Associated Products (14)Associated Documents - May 1, 2013•Document ID: 10149594Service Bulletin/Repair InstructionsSTEERING
- Mfr Comm. #:
- 320213
- Date Added:
- November 26, 2018
- Manufacturer:
- BMW
SummaryElectronic Power Steering (EPS) Fails when Starting: Fault Code 4823E1. The EPS fails briefly when starting the engine. FC 4823E1 is stored in the EPS_20 control unit. CAUSE Specific undervoltage situation during engine starting.
Associated Products (6)Associated Documents - May 1, 2013•Document ID: 10149593Service Bulletin/Repair InstructionsPOWER TRAIN; ELECTRICAL SYSTEM
- Mfr Comm. #:
- 270212
- Date Added:
- November 26, 2018
- Manufacturer:
- BMW
Summary"The warning lamps for DSC, ABS and brake warning are illuminated. There may also be a warning in the control display for ""Chassis Control System failure."" One or more of the following fault codes are stored: DSC: * D36D44 - Signal error longitudinal torque distribution (LMV) * 48097D - Transfer Case clutch position open F01, F02, F07, F10, F12 and F13 LMV: * 440108 - Control Unit internal error * 44010F - Control Unit internal error E70, E71 and E84 LMV: * 5219 - Control Unit: EEPROM Writing-reading-error * 522D - Control Unit: internal Error CAUSE Software calibration error in the LMV"
Associated Products (39)Associated Documents - May 1, 2013•Document ID: 10149589Service Bulletin/Repair InstructionsFUEL SYSTEM, GASOLINE; ENGINE
- Mfr Comm. #:
- 130409
- Date Added:
- November 26, 2018
- Manufacturer:
- BMW
Summary"N54 Engine: Diagnosis of Cold Start Rough Running with Misfire Faults. The customer may complain that during the cold start in the morning, the engine runs very roughly and the Service Engine Soon lamp is illuminated. Various misfire fault codes (e.g., 29CC, 29D2, 29D1, 29D0, 29C0, 29CF) may be stored in the DME control module. The engine rough running complaint can be reproduced on a cold start in the workshop. During the course of diagnosis, the spark plugs, removed from the misfiring cylinders after the problem was reproduced, are found to be soaked (""wet"") with fuel, while the injector tips are covered with a layer of carbon deposit. Possible cause: high-pressure injector failure (leakage or incorrect spraying pattern) due to internal wear or unfavorable stock of tolerances IMPORTANT: For comprehensive N54 drivability diagnostics, always refer to the ""N54 Engine Diagnostic Fault Tree"" file (the current version ""02_14_13"" is found as a PDF attachment to SI B12 55 06)."
Associated Products (120)Associated Documents - May 1, 2013•Document ID: 10149587Service Bulletin/Repair InstructionsFUEL SYSTEM, GASOLINE
- Mfr Comm. #:
- 125506
- Date Added:
- November 26, 2018
- Manufacturer:
- BMW
SummaryN54: Diagnosis for DME FC 29DC/29F2/2FBF and Extended High-pressure Fuel Pump (HDP) Warranty Coverage.
Associated Products (31)Associated Documents - May 1, 2013•Document ID: 10149581Service Bulletin/Repair InstructionsENGINE
- Mfr Comm. #:
- 120513
- Date Added:
- November 26, 2018
- Manufacturer:
- BMW
SummaryService Engine Soon Light Flashes with Throttle Adaptation Faults Stored. The EML light flashes with a check control message for reduced power output and/or the Service Engine Soon lamp (MIL) flashes. During the throttle valve adaptation (teach-in limit run), faults may occur due to signal voltage oscillations. This could lead to a termination of the teach-in routine or an incorrect value taught in at the lower limit. The following faults can be stored in the DME memory: E82, E84, E88, E89, E92, and E93 BN2000 vehicles * 28D0: throttle valve, adaptation: Initial adaptation, lower limit not taught in * 28D4: throttle valve, adaptation: Subsequent teach-in, lower limit not taught in * 28C4: throttle valve, adaptation: Emergency air position not adapted * 28A0: throttle valve angle - Intake manifold absolute comparison: pressure too high ??3166: Tank-ventilation system: fault F01, F02, F06, F07, F10, F12, F13, F30, F31, and ALPINA B7 BN2020 vehicles: * 101408: throttle valve, adaptation: Initial adaptation, lower limit not taught in * 107AE0: throttle valve, adaptation: Subsequent teach-in, lower limit not taught in * 101402: throttle valve, adaptation: Emergency air position not adapted * 101F01: throttle valve angle - Intake manifold absolute comparison: pressure too high ??190F08: Tank-ventilation system: fault Sensitivity of the throttle valve sensor (only affects parts installed during this production period)
Associated Products (38)Associated Documents - April 1, 2013•Document ID: 10149495Service Bulletin/Repair InstructionsEQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL; EQUIPMENT
- Mfr Comm. #:
- 840313
- Date Added:
- November 26, 2018
- Manufacturer:
- BMW
Summary"Roadside Assistance and BMW Online Services Inoperative After Programming. Roadside Assistance and BMW Online services are inoperative after programming the vehicle with ISTA/P 2.48 to 2.49.0. The symptoms are as follows: * BMW Online - No network available when selected * Roadside Assistance - When selected, a message stating ""Service not enabled or contract expired"" is displayed. Also, ""Start service"" is grayed out and cannot be selected. CAUSE Software error in the CIC (Car Information Computer)"
Associated Products (34)Associated Documents