2024 Jeep Wrangler Tail Light Recall
Chrysler (FCA US, LLC) has issued a recall for certain 2024 Jeep Wrangler vehicles due to a potential issue with the power distribution center. This defect can prevent trailer turn signal lights and taillights from operating correctly, failing to comply with Federal Motor Vehicle Safety Standard…

Why This Matters
This 2024 Jeep Wrangler recall addresses a critical safety concern related to exterior lighting. Trailer taillights and turn signal lights that do not illuminate properly can significantly reduce a vehicle's visibility to other drivers, especially during turns or braking. This condition directly increases the risk of a crash, posing a danger to both the Wrangler occupants and other road users.
What's Being Recalled
Chrysler (FCA US, LLC) is recalling certain 2024 Jeep Wrangler vehicles. The core issue lies with the power distribution center, which may malfunction and prevent the trailer turn signal lights and taillights from working correctly. This defect means the affected vehicles do not comply with Federal Motor Vehicle Safety Standard number 108, which governs "Lamps, Reflective Devices, and Associated Equipment."
This specific recall is identified by NHTSA ID 24V414000 and Chrysler's internal recall number 57B.
How to Check if Your Vehicle is Affected
Owner notification letters for this 2024 Jeep Wrangler recall were mailed on July 2, 2024. If you own a 2024 Jeep Wrangler, you should have received or will soon receive a notification from FCA US, LLC. You can also contact FCA US, LLC customer service directly at 1-800-853-1403 to inquire about your vehicle's eligibility for recall 57B.
Additionally, you can visit the National Highway Traffic Safety Administration (NHTSA) website at www.nhtsa.gov and enter your Vehicle Identification Number (VIN) to check for any open recalls, including 24V414000.
Manufacturer's Remedy
To resolve this issue, authorized Jeep dealers will replace the power distribution center in affected vehicles. This repair will be performed free of charge to the owner. Owners are encouraged to schedule an appointment with their local dealer as soon as possible after receiving their notification.
Source: NHTSA Recall ID: 24V414000
Frequently Asked Questions
- Which Jeep Wrangler models are affected by this recall?
- This recall specifically affects certain 2024 Jeep Wrangler vehicles. Owners should check their VIN with FCA US, LLC customer service or on the NHTSA website to confirm if their vehicle is included.
- What is the problem described in recall 24V414000?
- Recall 24V414000, also known as manufacturer recall 57B, addresses a fault where the power distribution center in certain 2024 Jeep Wrangler vehicles may prevent trailer turn signal lights and taillights from operating as intended, violating Federal Motor Vehicle Safety Standard 108.
- What is the fix for the 2024 Jeep Wrangler recall?
- The remedy for this recall involves dealers replacing the faulty power distribution center in affected 2024 Jeep Wrangler vehicles. This repair will be completed free of charge to the owner.
- How will I be notified about this recall?
- Owner notification letters for this 2024 Jeep Wrangler recall were mailed on July 2, 2024. If you own an affected vehicle, you should receive a letter from FCA US, LLC. You can also contact FCA US, LLC customer service at 1-800-853-1403 or check the NHTSA website with your VIN.
Related Articles
2024 Jeep Wrangler Problems: Recalls, Complaints & TSBs
The 2024 Jeep Wrangler has faced four safety recalls, primarily concerning exterior lighting and airbag deployment. While no owner complaints or federal investigations have been reported, twenty manufacturer service bulletins address various issues from engine performance and electrical glitches…
2024-2026 Jeep, Ram, Dodge Cylinder Head Bolt Inspection
Mopar has issued a Quality Inspection Request (QIR) concerning cylinder head cover bolts, part number 04893799AJ, for various 2024-2026 Jeep, Ram, and Dodge models. Dealers are instructed to identify and quarantine suspect bolts with a chamfered flange.
2024 Jeep Wrangler PCM Update for Misfire & O2 Sensor DTCs
A Technical Service Bulletin (TSB 18-003-26 REV. A) has been issued for the 2024 Jeep Wrangler to address various engine performance issues, including misfires, rough idle, and O2 sensor fault codes. This update involves reprogramming the Powertrain Control Module (PCM).
2021-2026 Jeep Wrangler / Gladiator Wind Noise TSB S2623000018
This technical service bulletin, S2623000018, addresses "Wind Noise From Hard Top Freedom Panels Near Rear View Mirror While Driving" in 2021-2026 Jeep Wrangler and Gladiator models, detailing a diagnostic and repair procedure involving the header seal.
2024 Jeep Wrangler Heated Steering Wheel Not Working TSB
If your 2024 Jeep Wrangler's heated steering wheel isn't working or isn't warm enough, Technical Service Bulletin (TSB) 08-121-26 from Stellantis outlines a software update for the Comfort Seat Wheel Module (CSWM) to resolve the issue.
Leave a comment
Comments are moderated and may take a moment to appear. Only your first name and the initial of your last name are shown publicly.
Comments
Be the first to comment.