2022-2025 BMW X5, X6, X7 DME Programming Delivery Stop

BMW has issued Service Information Bulletin (SIB) 12 07 25, Revision 2, which replaces the previous SIB 12 07 25 dated June 2025. This bulletin announces a delivery stop for specific 2022-2025 BMW X5, X6, and X7 models. The delivery stop is necessary to address a programming error in the Digital Motor Electronics (DME) control unit.

Important Warnings for Dealers and Owners

BMW has issued strict instructions regarding vehicles affected by this delivery stop:

• "Do not deliver to a customer, a New, Certified Pre-Owned or Used vehicle subject to a Delivery Stop, until the vehicle is repaired."
• "Do not use or sell replacement equipment/parts subject to a Delivery Stop."

This means that any affected vehicle currently in dealer inventory cannot be sold or delivered until the necessary software update has been performed. Owners of affected vehicles should contact their BMW dealer to ensure the required update is completed.

Situation and Cause

A quality check revealed that the DME in these vehicles contains a programming error. This software issue leads to a deviation of the fuel-air mixture within the internal combustion engine. This BMW X5 DME programming error is a software-related issue that requires a specific update.

Correction and Repair Procedure Summary

To correct the BMW X5 DME programming error, technicians must determine the vehicle's current I-level using applications like AIR or ISPA NEXT/AWP. The vehicle then needs to be reprogrammed using ISTA 4.53.4x or a newer version of the software, which was released on June 4, 2025. The target integration level for this update is S18A-25-03-563.

During the programming process, it is crucial to connect a BMW-approved battery charger/power supply, as detailed in SI B04 23 10, to maintain stable voltage. The ISTA system will automatically reprogram and code all programmable control modules that do not have the latest software. If other open technical campaigns are present, they should also be performed during the same workshop visit.

Required Tools or Parts

Dealers will use the ISTA 4.53.4x (or higher) diagnostic and programming software. A BMW-approved battery charger/power supply, as referenced in SI B04 23 10, is also required to ensure a stable power supply during the reprogramming process.

Owner Action

If you own a 2022-2025 BMW X5, X6, or X7, your vehicle may be subject to this delivery stop. Vehicles requiring this campaign will show as “Open” in BMW's internal systems (AIR, AWP, Campaign Summary, or Warranty Vehicle Inquiry). BMW is not notifying consumers directly for delivery stops, so it is recommended to contact your authorized BMW dealer to check if your vehicle is affected and to schedule the necessary software update. The repair will be performed free of charge under warranty.