2021-2025 BMW Delivery Stop: Program Control Units
BMW has issued a delivery stop, SIB 12 04 25, for various 2021-2025 models. This is due to a software error causing certain fault memories to be permanently stored, which does not comply with CARB regulations. Vehicles must be reprogrammed before delivery or sale.
David Chen2022 BMW X5
Também se aplica a
- BMW 530i
- 2022–2025
- BMW 740i
- 2023–2025
- BMW X1
- 2021–2023
- BMW X2
- 2023
- BMW X5
- 2023–2025
- BMW X6
- 2022–2023
- BMW X7
- 2021–2023
▸ Mostrar mais 1▾ Mostrar menos
Important Warnings
BMW has issued a critical advisory regarding this delivery stop, SIB 12 04 25:
- "Do not deliver to a customer, a New, Certified Pre-Owned or Used vehicle subject to a Delivery Stop, until the vehicle is repaired. Do not use or sell replacement equipment/parts subject to a Delivery Stop."
This means affected vehicles cannot be sold or delivered until the necessary software update is performed.
What's the Issue?
BMW AG has initiated a delivery stop, effective April 24, 2025, for certain 2021-2025 BMW vehicles. The core problem stems from a software error that results in specific fault memories being permanently stored within the vehicle's control units. While this fault does not impact the vehicle's use by the customer, the permanent storage of these fault memories does not meet the legal specifications set by the California Air Resources Board (CARB).
This issue requires a BMW delivery stop program control units action to ensure compliance and proper vehicle operation. The underlying cause has been identified as a software error, necessitating a reprogramming of the affected control units.
Repair Procedure Summary
To correct the permanently stored fault memories, the control units must be reprogrammed. There are two primary methods for this BMW delivery stop program control units update:
1. Remote Software Upgrade (RSU)
This method is applicable if the vehicle is capable of receiving over-the-air updates. Owners can check for available RSU offerings through the vehicle's
Frequently Asked Questions
- What is the BMW SIB 12 04 25 delivery stop?
- The SIB 12 04 25 is a delivery stop issued by BMW for certain 2021-2025 models. It addresses a software error causing specific fault memories to be permanently stored, which violates CARB regulations. Vehicles under this delivery stop must be repaired before sale or delivery.
- What does "program control units" mean in this context?
- To "program control units" means to update the software within your BMW's electronic control modules. This specific update is designed to correct the software error that leads to permanently stored fault memories, ensuring compliance with regulatory standards.
- How can I tell if my BMW is affected by this delivery stop?
- You can check if your vehicle is affected by looking for an "Open" status in BMW's internal systems like AIR, AWP, Campaign Summary, or Warranty Vehicle Inquiry. Your dealer can also check the Inventory Campaign Details (ICD) under ROSS. The affected models include various X Series, 5 Series, and 7 Series vehicles from model years 2021-2025.
- What is the required software version for the Remote Software Upgrade (RSU)?
- For the Remote Software Upgrade (RSU) to resolve this issue, the software version to be installed must be 03/2025.47 or higher. If a lower version is available via RSU, the vehicle will need to be programmed via ISTA at a dealership.
- What happens if the control unit programming fails?
- If one or more control modules fail during the reprogramming procedure, the dealership will perform additional consequential repair work. This may involve using the IRAP Control Unit Recovery procedure and will be claimed under specific repair codes, such as 0099770200, along with corresponding labor operation codes.
Related Articles
2022 BMW Front Axle Grease Buildup SIB 31 01 22
This BMW Service Information Bulletin SIB 31 01 22 clarifies that grease buildup on front axle CV boots is often normal. It provides guidelines for when a CV boot or axle half-shaft replacement is truly necessary for 2022 BMW X-series and 2 Series Gran Coupe models.
2021-2023 BMW X5, X6, X7 Knee Airbag Warning TSB
BMW has released Service Information Bulletin SIB 65 27 24 to address a common issue in 2021-2023 X5, X6, and X7 models where chafing wiring can cause a knee airbag fault and trigger a red airbag warning light. This bulletin outlines the repair procedure to prevent future damage.
2022-2024 BMW Valvetronic Emissions Recall 24E-A02
BMW's Voluntary Emissions Recall 24E-A02 addresses a DME calibration error affecting Valvetronic systems in certain 2022-2024 X5, X6, X7, XM, and 7 Series vehicles. The recall, documented in SIB 12 02 24, involves a software update to correct the issue.
2022-2025 BMW Emissions Recall: Program Control Units
BMW has announced Emissions Recall 25E-A02, identified as Service Information Bulletin SIB 12 04 25, for certain 2022-2025 models. A software error causes permanent storage of fault memories, requiring control unit reprogramming to comply with emissions regulations.
2022-2023 BMW Delivery Stop: Integrated Braking System
BMW has issued Service Information Bulletin SIB 34 04 25, a delivery stop for certain 2022-2023 models. This action addresses a data input error causing permanent storage of fault memories in the integrated braking system control unit, which is resolved by a software update.
Leave a comment
Comments are moderated and may take a moment to appear. Only your first name and the initial of your last name are shown publicly.
Comments
Be the first to comment.