2024 BMW X5 Oil Pressure Sensor Delivery Stop

BMW has released Service Information Bulletin SIB 11 03 24, a Delivery Stop, for specific 2024 BMW models. This bulletin, which is Revision 1 and replaces SI B11 03 24 dated July 2024, addresses an issue with the engine oil pressure sensor. The 2024 BMW X5 oil pressure sensor, along with those in other affected models, was not tightened to the correct torque during manufacturing.

This Delivery Stop means that affected vehicles cannot be delivered to customers until the necessary repair is completed. The bulletin provides updated information regarding the cause, procedure, and claim details for this issue.

Important Warning for Dealers and Owners

BMW has issued a strict directive regarding this Delivery Stop:

"Do not deliver to a customer, a New, Certified Pre-Owned or Used vehicle subject to a Delivery Stop, until the vehicle is repaired. Do not use or sell replacement equipment/parts subject to a Delivery Stop."

This means that any vehicle identified under SIB 11 03 24 must undergo the repair before it can be sold or delivered. Furthermore, any replacement parts related to this issue are also subject to the Delivery Stop and should not be used or sold independently.

Cause of the Issue

The root cause of this Delivery Stop is that the engine oil pressure sensor was not tightened with the correct torque during the manufacturing process. This improper tightening could lead to potential issues with the sensor's function.

Repair Procedure Summary

The repair involves replacing the engine oil pressure sensor. Technicians are instructed to follow Repair Instruction 12 61 280, titled "Removing and installing or replacing oil pressure sensor." This procedure ensures the new sensor is installed correctly with the appropriate tightening torque.

Required Parts Information

For the repair, specific parts must be used and invoiced. The primary component is the engine oil pressure sensor itself. Additionally, hex bolts and specific types of engine oil (0W-30 LL01FE) are required for the procedure, either for topping up or as needed.

Part Number	Description	Quantity
12 61 8 647 488	Oil Pressure sensor	1
07 14 6 886 617	Hex bolt	Up to 12
07 14 8 837 399	Hex bolt	Up to 12
83 21 5 A42 D33	0W-30 LL01FE (209 Liter Drum, DN = one-tenth liter)	If/as needed/top up
83 21 5 A42 D39	0W-30 LL01FE (Bulk Tanker, DN = one-tenth liter)	If/as needed/top up

Other materials, fluids, lubricants, one-time use screws, nuts, and seals, not explicitly listed above, should be selected from the Electronic Parts Catalog (ETK) or other approved BMW resources as per the respective vehicle type and ISTA repair instructions.

Claim Information

For reimbursement, the defect code for this action is 0012220600, described as "F95 F96 G0x G7x S68T Replace oil pressure sensor." Dealers will use specific flat rate labor operation codes for claim submission, depending on the work package. For example, labor operation 00 76 868 is for replacing the oil pressure sensor, with varying labor allowances based on the specific model (F95, F96, G05, G07, G70). Sublet Code 4 is available for reimbursement of bulk supply materials like engine oil top-up.

What Owners Should Know

If you own a 2024 BMW X5, X6, X7, or 7 Series Sedan, especially if it falls within the production dates of November 10, 2023, and April 3, 2024, it is crucial to confirm if your vehicle is subject to this Delivery Stop. If your vehicle is affected, the repair involving the 2024 BMW X5 oil pressure sensor replacement must be completed by a BMW authorized service center before the vehicle can be delivered or driven.

NHTSA ID: 11006718