2021 BMW X3 / X4 Glove Box Cover Issue
BMW has issued a manufacturer communication, NHTSA ID 10194299, regarding a potential issue with the passenger side glove compartment cover in certain 2021 BMW X3 and X4 vehicles. The communication notes that some covers may be 'out-of-specification,' potentially affecting fitment or function.
Marcus Weber2021 BMW X3
Também se aplica a
- BMW X4
- 2021
BMW has issued a manufacturer communication, identified by NHTSA ID 10194299, concerning a potential issue with the glove compartment cover in certain 2021 BMW X3 and X4 models. This Technical Service Bulletin (TSB) addresses a manufacturing quality detail that owners should be aware of.
What is the Glove Box Cover Issue?
According to the 2021 BMW X3 manufacturer_communication, it is possible that some vehicles were assembled with a passenger side glove compartment cover that does not meet BMW's exact specifications. An 'out-of-specification' part typically means it deviates from the intended design or manufacturing tolerances. While the communication does not detail specific symptoms or failures, such a condition could potentially lead to fitment issues, unusual noises, or affect the overall aesthetic and function of the glove box.
What Owners Should Do
If you own a 2021 BMW X3 or X4 and have concerns about your vehicle's glove compartment cover, it is recommended to contact your authorized BMW dealership. Reference the manufacturer communication, NHTSA ID 10194299, when discussing this potential issue. Dealership technicians can inspect the glove box cover to determine if it is affected and advise on any necessary actions. Since this is a manufacturer communication rather than a recall, BMW is not explicitly notifying consumers. Owners must proactively inquire about this 2021 BMW X3 manufacturer_communication.
Source: NHTSA ID 10194299
Related Articles
2021 BMW X3 / X4 Active PDC Undesired Braking TSB
BMW has released Service Information Bulletin SIB 66 17 19 to address an issue where 2021 BMW X3 and X4 vehicles may experience undesired braking when reversing on an incline with Active Park Distance Control (PDC) engaged. This TSB outlines a software correction for the PDC control unit.
2021 BMW X3/X4 Knee Airbag Wiring Harness Extended Warranty
BMW has announced an extended limited warranty for the knee airbag wiring harness in certain 2021 BMW X3 and X4 vehicles. This extension addresses potential chafing issues that can lead to airbag warning lights and specific fault codes, covering repairs for 10 years or 120,000 miles.
2021-2022 BMW X3 Rear Cargo Rails Delivery Stop
BMW has issued a Delivery Stop, SIB 51 28 24, for certain 2021-2022 BMW X3 models (F97, G01) due to an insecure screw connection for the rear cargo rail bolts. This affects vehicles previously subject to Recall 24V-534. Dealers are instructed not to deliver or sell affected vehicles until repaired.
2021-2024 BMW M Front Strut Noise TSB 31 01 24
BMW has issued Service Information Bulletin 31 01 24 for 2021-2024 M models (X3, X4, M2, M3, M4) addressing a 'cracking or clicking type noise' from the front struts. This bulletin clarifies that the noise is a normal operating sound of the thrust bearing and does not require parts replacement.
2018-2021 BMW X3/X4 Knee Air Bag Wiring Harness Repair
BMW SIB 65 01 22 details a repair for knee airbag warning lights and fault codes (930949, 93094F, 93094C, 930952) in 2018-2021 BMW X3 and X4 models. The issue stems from chafed wiring harnesses. This bulletin outlines the diagnostic and repair steps.
Leave a comment
Comments are moderated and may take a moment to appear. Only your first name and the initial of your last name are shown publicly.
Comments
Be the first to comment.