Boletim de serviço

2021 BMW X3/X4 Engine Crankcase Manufacturing Error

A manufacturer communication, NHTSA ID 10188937, details a significant crankcase manufacturing error affecting certain 2021 BMW X3 and X4 models. This defect impacts the connecting rod bearings and necessitates a complete engine replacement before vehicle delivery.

Byeditor david chen2021 BMW X3
2021 BMW X3 — 2021 BMW X3 manufacturer_communication
Editorial illustration generated for this article.
NHTSA 10188937BMW X3 engine replacementBMW X4 engine replacementcrankcase manufacturing errorconnecting rod bearingBMW delivery stop2021 BMW X3 manufacturer_communication2021 BMW X4 manufacturer_communicationBMW engine defectBMW X3 engine issue
BMW X4
2021

Why This Matters

A critical manufacturing error in the engine's crankcase has been identified in certain 2021 BMW X3 and X4 vehicles. This defect directly impacts the connecting rod bearings, which are vital components for engine operation. Such an issue can lead to severe engine damage and potential failure if not addressed promptly, posing a significant safety concern.

What's Being Addressed

This manufacturer communication, identified by NHTSA ID 10188937, highlights a specific problem: the engine must be replaced due to a crankcase manufacturing error. This defect affects the connecting rod bearings, making the engine unfit for use. The required remedy is a complete engine replacement for affected vehicles.

Important Warnings for Owners and Dealers

BMW has issued strict guidelines regarding vehicles affected by this issue. It is crucial to understand these directives:

  • "Do not deliver to a customer, a New, Certified Pre-Owned or Used vehicle subject to a Delivery Stop, until the vehicle is repaired."
  • "Do not use or sell replacement equipment/parts subject to a Delivery Stop."

These warnings emphasize the severity of the defect and the necessity of repair before any vehicle delivery or parts sale. Owners of a 2021 BMW X3 manufacturer_communication should be aware of these restrictions.

Manufacturer's Remedy

The prescribed remedy for this crankcase manufacturing error is a full engine replacement. This ensures that the vehicle receives a new engine free from the identified defect, restoring its intended performance and safety. This repair is mandatory before any affected vehicle can be sold or delivered.

How to Check if Your Vehicle is Affected

If you own a 2021 BMW X3 or X4, and are concerned about this 2021 BMW X3 manufacturer_communication, it is recommended to contact your authorized BMW dealer immediately. Provide them with your vehicle's VIN to determine if your specific vehicle is subject to this delivery stop and requires the engine replacement. Dealers have access to the most current information regarding affected vehicles and the necessary repair procedures.


Source: NHTSA ID 10188937

Related Articles

2021 BMW X3 / X4 Active PDC Undesired Braking TSB

BMW has released Service Information Bulletin SIB 66 17 19 to address an issue where 2021 BMW X3 and X4 vehicles may experience undesired braking when reversing on an incline with Active Park Distance Control (PDC) engaged. This TSB outlines a software correction for the PDC control unit.

2021 BMW X3/X4 Knee Airbag Wiring Harness Extended Warranty

BMW has announced an extended limited warranty for the knee airbag wiring harness in certain 2021 BMW X3 and X4 vehicles. This extension addresses potential chafing issues that can lead to airbag warning lights and specific fault codes, covering repairs for 10 years or 120,000 miles.

2021-2022 BMW X3 Rear Cargo Rails Delivery Stop

BMW has issued a Delivery Stop, SIB 51 28 24, for certain 2021-2022 BMW X3 models (F97, G01) due to an insecure screw connection for the rear cargo rail bolts. This affects vehicles previously subject to Recall 24V-534. Dealers are instructed not to deliver or sell affected vehicles until repaired.

2021-2024 BMW M Front Strut Noise TSB 31 01 24

BMW has issued Service Information Bulletin 31 01 24 for 2021-2024 M models (X3, X4, M2, M3, M4) addressing a 'cracking or clicking type noise' from the front struts. This bulletin clarifies that the noise is a normal operating sound of the thrust bearing and does not require parts replacement.

2018-2021 BMW X3/X4 Knee Air Bag Wiring Harness Repair

BMW SIB 65 01 22 details a repair for knee airbag warning lights and fault codes (930949, 93094F, 93094C, 930952) in 2018-2021 BMW X3 and X4 models. The issue stems from chafed wiring harnesses. This bulletin outlines the diagnostic and repair steps.

Comments

Be the first to comment.

Leave a comment

Comments are moderated and may take a moment to appear. Only your first name and the initial of your last name are shown publicly.

Verifying you are human...