Toyota · Model Report
Showing safety data for the 2006 model year only.
Tenneco Automotive (DRiV) is recalling certain aftermarket ball joints for 2004-2007 Toyota Sequoia and 2004-2006 Toyota Tundra vehicles, MOOG part number K80521, K80522, NAPA part number NCP2601633, NCP2601634, ACDelco part number 45D2344, and 45D2345. The ball joint housing may have inadequate hardness, causing premature failure.
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2010-2016 4Runner, 2003-2006 Tundra, 2003-2013 Corolla, 2009-2010 Corolla Matrix, 2004-2005 RAV4, 2002-2007 Sequoia, 2011-2013 Sienna, 2008-2012 Scion xB, 2008-2009 Lexus IS-F, 2007-2012 Yaris and Lexus ES350, 2010-2017 Lexus GX460, 2002-2010 Lexus SC430, 2006-2012 Lexus IS250 and IS350 and 2010-2015 Lexus IS250C and IS350C vehicles. These vehicles had their driver or passenger frontal air bag inflators previously replaced under a prior recall using inflators of the same design. The inflators may explode due to propellant degradation occurring after long-term exposure to high absolute humidity, temperature and temperature cycling.
Southeast Toyota Distributors, LLC (SET) is recalling certain 2005-2011 4Runner, Highlander, Sequoia, and Sienna, 2005-2010 Avalon and Tundra, 2006-2008 Camry Solara, 2006-2010 Highlander hybrid, 2006-2011 Rav4 and Tacoma, 2007-2010 FJ Cruiser, 2007-2011 Camry hybrid, 2009-2010 Venza, 2010-2012 Prius, 1988-1990 and 2005-2010 Camry, and 1989 and 2009-2010 Corolla vehicles equipped with aftermarket accessory seat heaters with a copper strand heating element. The electrical wiring in the seat heaters may be damaged when the seat cushion is compressed.
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain model year 2003-2006 Toyota Land Cruiser and Lexus LX470, 2005-2006 Toyota Tundra and Sequoia, 2004-2006 Toyota 4Runner and Lexus GX470 vehicles equipped with side curtain-shield-air bags. The affected vehicles have an air bag control module that may be improperly programmed, causing the side curtain-shield-air bags to deploy inadvertently.
Toyota Motor Engineering & Manufacturing (Toyota) notified the agency on May 13, 2015 that they are recalling certain model year 2004 Sequoia vehicles manufactured August 18, 2003, to August 19, 2004, and 2003-2004 Tundra vehicles manufactured March 18, 2003, to August 25, 2004. On June 16, 2015, Toyota expanded the recall to include an additional 1,270,468 vehicles, including model year 2002-2003 and 2005-2007 Sequoia, 2005-2006 Tundra, 2003-2007 Corolla, 2003-2007 Corolla Matrix, 2003-2007 Pontiac Vibe and 2002-2007 Lexus SC vehicles. This is to address a safety defect in the passenger side frontal air bag inflator which may produce excessive internal pressure causing the inflator to rupture upon deployment of the air bag. This recall addresses both the passenger side frontal air bags that were originally installed in the vehicles, as well as replacement air bags that may have been installed as replacement service parts. A replacement air bag may have been installed, as one example, if a vehicle had been in a crash necessitating the replacement of the passenger side frontal air bag.
The vehicle was at the independent mechanic. For a repair and discovered that the bottom frame was rusted. The vehicle was not repaired. The dealer was also notified of the failure; however the vehicle was not diagnosed or repaired. The manufacturer was not notified of the issue. The approximate failure mileage was 330,000.
No injuries · No fire · No crash
My frame is rotting, with literal holes in it. I spoke with a dealership and they stated the recall had been fixed in 2015, prior to me owning it. I was told to contact the manufacturer and they said it would be an out of pocket expense. When I research the recall, the affected area of the frame is the same, with no apparent fixes.
No injuries · No fire · No crash
The frame has rusted so badly that the sway bar mount disengaged from the frame. Brought it to a Toyota dealership and confirmed that frame recalls were performed on earlier models with the same issue . However my year did not qualify.
No injuries · No fire · No crash
The contact’s father owns a 2006 Toyota Tundra equipped with Cooper Tires, Tire Line: Discoverer Rugged Trek, Tire Size: 265/70/R16, DOT Number: (N/A). While the contact’s father was driving at an undisclosed speed, the driver lost control of the vehicle. The contact’s father was able to regain control of the vehicle by releasing the accelerator pedal and allowing the vehicle to decelerate. The driver was able to pull over to the side of the road to inspect the vehicle. The driver became aware that the tread on the driver's side tire had separated, causing a portion of the tire near the seam to detach around the entire tire. The tire was a replacement tire. The driver replaced the tire with the spare. The contact sent an email to American Tire Depot where the tire was purchased. The manufacturer was informed of the failure. The vehicle failure mileage was approximately 194,040, and the tire failure mileage was approximately 17,339.
No injuries · No fire · No crash
I own a 2006 Toyota Tundra with severe frame corrosion and rot. The rust has eaten through major portions of the frame, especially around the rear crossmember and leaf spring mounts. It has compromised the vehicle’s safety and structural integrity. Toyota previously offered frame replacements and extended corrosion coverage for similar models (Tacoma, Sequoia, and certain Tundras), but my VIN was denied even though the issue is identical. The corrosion is so severe that it poses a risk of the frame snapping or suspension components detaching while driving. This is a serious safety defect, not just cosmetic rust. The frame can fail without warning, which could lead to loss of control or an accident. Toyota should be required to inspect and address this defect for all affected vehicles. Location of problem: Frame rails, rear crossmember, spare tire area, and control arm mounts. Date problem occurred: 07/09/2025 I’m requesting that NHTSA investigate and require Toyota to include my vehicle in their frame corrosion program or issue a new recall covering affected first-generation Tundras.
No injuries · No fire · No crash