Nissan Titan Service Bulletins
691 manufacturer communications on file.
- August 23, 2016•Document ID: 10091523Service Bulletin/Repair InstructionsEQUIPMENT
- Mfr Comm. #:
- NTB16-080
- Date Added:
- February 14, 2017
- Manufacturer:
- NISSAN
Summary"VOLUNTARY SERVICE CAMPAIGN 2016 TITAN XD; SPLASH GUARDS INTRODUCTION NISSAN IS CONDUCTING THIS VOLUNTARY SERVICE CAMPAIGN ON CERTAIN SPECIFIC 2016 TITAN XD VEHICLES TO INSTALL SPLASH GUARDS THAT SHOULD HAVE BEEN INSTALLED ON THE VEHICLE FROM THE FACTORY, BUT WERE NOT. THIS SERVICE WILL BE PERFORMED AT NO CHARGE TO THE CUSTOMER FOR PARTS OR LABOR. IDENTIFICATION NUMBER NISSAN HAS ASSIGNED IDENTIFICATION NUMBER PC434 TO THIS CAMPAIGN. THIS NUMBER MUST APPEAR ON ALL COMMUNICATIONS AND DOCUMENTATION OF ANY NATURE DEALING WITH THIS CAMPAIGN. DEALER RESPONSIBILITY DEALERS ARE TO REPAIR VEHICLES FALLING WITHIN RANGE OF THIS CAMPAIGN THAT ENTER THE SERVICE DEPARTMENT. THIS INCLUDES VEHICLES PURCHASED FROM PRIVATE PARTIES, VEHICLES PRESENTED BY TRANSIENT (TOURISTS) OWNERS, AND VEHICLES IN A DEALERS INVENTORY."
Associated Products (1)Associated Documents - August 23, 2016•Document ID: 10091521Service Bulletin/Repair InstructionsEQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
- Mfr Comm. #:
- NTB16-079
- Date Added:
- February 14, 2017
- Manufacturer:
- NISSAN
Summary"VOLUNTARY SERVICE CAMPAIGN 2016 TITAN XD; ELECTRONIC TAILGATE LOCK INTRODUCTION NISSAN IS CONDUCTING THIS VOLUNTARY SERVICE CAMPAIGN ON CERTAIN SPECIFIC 2016 TITAN XD VEHICLES TO INSTALL AN ELECTRONIC TAILGATE LOCK THAT SHOULD HAVE BEEN INSTALLED ON THE VEHICLE FROM THE FACTORY, BUT WAS NOT. THIS SERVICE WILL BE PERFORMED AT NO CHARGE TO THE CUSTOMER FOR PARTS OR LABOR. IDENTIFICATION NUMBER NISSAN HAS ASSIGNED IDENTIFICATION NUMBER PC466 TO THIS CAMPAIGN. THIS NUMBER MUST APPEAR ON ALL COMMUNICATIONS AND DOCUMENTATION OF ANY NATURE DEALING WITH THIS CAMPAIGN. DEALER RESPONSIBILITY DEALERS ARE TO REPAIR VEHICLES FALLING WITHIN RANGE OF THIS CAMPAIGN THAT ENTER THE SERVICE DEPARTMENT. THIS INCLUDES VEHICLES PURCHASED FROM PRIVATE PARTIES, VEHICLES PRESENTED BY TRANSIENT (TOURISTS) OWNERS, AND VEHICLES IN A DEALERS INVENTORY."
Associated Products (1)Associated Documents - August 23, 2016•Document ID: 10091514Service Bulletin/Repair InstructionsEQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
- Mfr Comm. #:
- NTB16-078
- Date Added:
- February 14, 2017
- Manufacturer:
- NISSAN
Summary"VOLUNTARY SERVICE CAMPAIGN 2016 TITAN XD; DUAL WALL BEDLINER AND CARGO TIE DOWN KIT INTRODUCTION NISSAN IS CONDUCTING THIS VOLUNTARY SERVICE CAMPAIGN ON CERTAIN SPECIFIC 2016 TITAN XD VEHICLES TO INSTALL A DUAL WALL BEDLINER AND A CARGO TIE DOWN KIT THAT SHOULD HAVE BEEN INSTALLED ON THE VEHICLE FROM THE FACTORY, BUT WERE NOT. THIS SERVICE WILL BE PERFORMED AT NO CHARGE TO THE CUSTOMER FOR PARTS OR LABOR. IDENTIFICATION NUMBER NISSAN HAS ASSIGNED IDENTIFICATION NUMBER PC423 TO THIS CAMPAIGN. THIS NUMBER MUST APPEAR ON ALL COMMUNICATIONS AND DOCUMENTATION OF ANY NATURE DEALING WITH THIS CAMPAIGN. DEALER RESPONSIBILITY DEALERS ARE TO REPAIR VEHICLES FALLING WITHIN RANGE OF THIS CAMPAIGN THAT ENTER THE SERVICE DEPARTMENT. THIS INCLUDES VEHICLES PURCHASED FROM PRIVATE PARTIES, VEHICLES PRESENTED BY TRANSIENT (TOURISTS) OWNERS, AND VEHICLES IN A DEALERS INVENTORY."
Associated Products (1)Associated Documents - August 17, 2016•Document ID: 10091567Service Bulletin/Repair InstructionsSEATS:BARRIERS
- Mfr Comm. #:
- UPDATE 2 - PC469
- Date Added:
- February 14, 2017
- Manufacturer:
- NISSAN
Summary"CENTER SEAT QUALITY ASSURANCE HOLD THE ANNOUNCEMENT FROM AUGUST 1ST, 2016 HAS BEEN REVISED TO INCLUDE: - REPAIR, PARTS, AND CLAIMS INFORMATION FOR THE PREVIOUSLY ANNOUNCED QUALITY HOLD"
Associated Products (1)Associated Documents - August 15, 2016•Document ID: 10091525Service Bulletin/Repair InstructionsPOWER TRAIN:DRIVELINE
- Mfr Comm. #:
- NTB16-082
- Date Added:
- February 14, 2017
- Manufacturer:
- NISSAN
Summary"2016 TITAN XD; BUMP FELT ON LIGHT THROTTLE APPLICATION AT SPEEDS OVER 40 MPH GAS V8 ENGINE ONLY WITH 7-SPEED A/T IF YOU CONFIRM A BUMP OR SHOCK IS FELT FROM THE DRIVETRAIN, - ONLY WHILE TRAVELING AT 40 MPH OR MORE, AND THEN - LIGHTLY APPLYING THE ACCELERATOR AFTER BRIEFLY COASTING. ACTION 1. REFER TO STEP 6 IN THE SERVICE PROCEDURE TO CONFIRM THIS BULLETIN APPLIES TO THE VEHICLE YOU ARE WORKING ON. 2. IF THIS BULLETIN APPLIES, REPROGRAM THE ECM."
Associated Products (1)Associated Documents - August 5, 2016•Document ID: 10091565Service Bulletin/Repair InstructionsEQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
- Mfr Comm. #:
- UPDATE 1 - PC471
- Date Added:
- February 14, 2017
- Manufacturer:
- NISSAN
Summary"TITAN XD QUALITY ASSURANCE HOLD THE ANNOUNCEMENT FROM JULY 22ND, 2016 HAS BEEN REVISED TO INCLUDE: - INFORMATION ON ACTION NECESSARY FOR THE PREVIOUSLY ANNOUNCED QUALITY HOLD"
Associated Products (1)Associated Documents - August 4, 2016•Document ID: 10091503Service Bulletin/Repair InstructionsEQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
- Mfr Comm. #:
- NTB13-097D
- Date Added:
- February 14, 2017
- Manufacturer:
- NISSAN
Summary"ALL MODEL YEAR 2012 AND NEWER NISSAN VEHICLES; EVAP LEAK DTC P0442, P0455, P0456 INFORMATION THIS BULLETIN HAS BEEN AMENDED. THE TITLE HAS BEEN REVISED, AND THE BULLETIN NOW INCLUDES VEHICLES IN PRODUCTION AS OF THE DATE OF THIS UPDATE. NO OTHER CHANGES HAVE BEEN MADE. PLEASE DISCARD ALL PREVIOUS VERSIONS OF THIS BULLETIN."
Associated Products (104)2017 Nissan Altima2017 Nissan Armada2017 Nissan Leaf2017 Nissan Maxima2017 Nissan Murano2017 Nissan Pathfinder2017 Nissan Rogue2017 Nissan Titan2017 Nissan Versa2016 Nissan 370Z2016 Nissan Altima2016 Nissan Armada2016 Nissan Cube2016 Nissan Frontier2016 Nissan GT-R2016 Nissan Juke2016 Nissan Leaf2016 Nissan Maxima2016 Nissan Murano2016 Nissan NV+ 84 moreAssociated Documents - August 1, 2016•Document ID: 10091509Service Bulletin/Repair InstructionsSTRUCTURE:BODY:TAILGATE
- Mfr Comm. #:
- NTB16-074
- Date Added:
- February 14, 2017
- Manufacturer:
- NISSAN
Summary"2016 TITAN XD; TAILGATE WILL NOT OPEN OR UNLOCK IF YOU CONFIRM - TAILGATE WILL NOT UNLOCK WITH THE MECHANICAL KEY OR ELECTRICALLY WITH THE KEY FOB. AND/OR - TAILGATE WILL NOT UNLATCH OR REQUIRES EXCESSIVE FORCE WHEN PULLING ON THE TAIL GATE HANDLE. ACTION SEE THE FLOW CHART ON PAGE 2 FOR THE APPROPRIATE REPAIR FOR THE VIN AND DATE OF THE VEHICLE BEING WORKED ON."
Associated Products (1)Associated Documents - August 1, 2016•Document ID: 10091080Service Bulletin/Repair InstructionsSEATS:MID/REAR ASSEMBLY
- Mfr Comm. #:
- UPDATE 1 - PC469
- Date Added:
- February 9, 2017
- Manufacturer:
- NISSAN
Summary"CENTER SEAT QUALITY ASSURANCE HOLD THE ANNOUNCEMENT FROM JULY 14TH, 2016 HAS BEEN REVISED TO INCLUDE: - INFORMATION ON ACTION NECESSARY FOR THE PREVIOUSLY ANNOUNCED QUALITY HOLD ***** DETAILED INFORMATION ***** AS PER OUR PREVIOUS ANNOUNCEMENT, NISSAN PLACED A TEMPORARY QUALITY ASSURANCE (QA) HOLD ON APPROXIMATELY 23 MY 2016 TITAN VEHICLES ON JULY 14, 2016 TO ENSURE VEHICLES DELIVERED TO OUR CUSTOMERS MEET OUR EXACTING STANDARDS AND CUSTOMER EXPECTATIONS. THIS TEMPORARY HOLD REMAINS IN EFFECT. NISSAN HAS CONCLUDED THE AFFECTED VEHICLES WILL REQUIRE THE FRONT CENTER SEAT ASSEMBLY TO BE REPLACED AS THE CENTER SEAT RISER DOES NOT MEET NISSAN DESIGN STANDARDS. ***** WHAT DEALERS SHOULD DO ***** 1. VERIFY IF VEHICLES CURRENTLY IN DEALER INVENTORY ARE AFFECTED BY THIS QA HOLD USING SERVICE COMM I.D. PC469 NOTE: DEALERS SHOULD CONTINUE TO CHECK NEW ARRIVING INVENTORY FOR QA HOLD APPLICABILITY. 2. PLEASE DO NOT SELL OR TRADE ANY AFFECTED VEHICLES IN DEALER INVENTORY. 3. NO FURTHER ACTION IS NECESSARY AT THIS TIME. NISSAN WILL COMMUNICATE INSTRUCTIONS AND CLAIMS INFORMATION WHEN PARTS SHIPMENTS BEGIN TO AFFECTED DEALERS."
Associated Products (1)Associated Documents - July 30, 2016•Document ID: 10091068Service Bulletin/Repair InstructionsEQUIPMENT; EQUIPMENT ADAPTIVE/MOBILITY
- Mfr Comm. #:
- PC474 2016 TITAN
- Date Added:
- February 9, 2017
- Manufacturer:
- NISSAN
Summary"FRONT PROP SHAFT BOLT TORQUE DEALER INVENTORY INSPECTION *****DEALER ANNOUNCEMENT***** NISSAN IS CONDUCTING A DEALER INVENTORY INSPECTION ON 963 SPECIFIC 2016 TITAN VEHICLES IDENTIFIED IN SERVICE COMM. DEALERS SHOULD INSPECT THE FRONT PROP SHAFT BOLT TORQUE AND IF THE BOLTS ARE FOUND TO BE NOT TORQUED TO SPECIFICATION, ALL BOLTS AND NUTS SHOULD BE REPLACED AND TIGHTENED TO SPECIFICATION THESE VEHICLES ARE EITHER CURRENTLY IN DEALER INVENTORY OR ASSIGNED AND IN TRANSIT TO THE DEALER. *****WHAT DEALERS SHOULD DO***** PLEASE FOLLOW THE ATTACHED REPAIR INSTRUCTIONS: 1. VERIFY IF VEHICLES CURRENTLY IN DEALER INVENTORY ARE AFFECTED BY THIS INSPECTION USING SERVICE COMM I.D. PC474. -AS A REMINDER NEW VEHICLES IN DEALER INVENTORY CAN BE ALSO BE IDENTIFIED USING DCS (SALES-> VEHICLE INVENTORY, AND FILTER BY OPEN CAMPAIGN) OR SERVICE COMM. 2. USE THE ATTACHED PROCEDURE TO INSPECT THE FRONT PROP SHAFT BOLT TORQUE AND IF NECESSARY, REPLACE THE PROP SHAFT NUTS AND BOLTS AND TIGHTEN THE FASTENERS TO SPECIFICATION. 3. THE SERVICE DEPARTMENT SHOULD SUBMIT THE APPLICABLE WARRANTY CLAIM FOR THE ACTION PERFORMED SO IT CAN BE CLOSED ON SERVICE COMM AND RELEASE THE VEHICLE. ***** DEALER RESPONSIBILITY ***** IT IS THE DEALERS RESPONSIBILITY TO CHECK SERVICE COMM USING THE APPROPRIATE CAMPAIGN I.D FOR THE INSPECTION STATUS ON EACH AFFECTED VEHICLE CURRENTLY IN INVENTORY. NISSAN REQUESTS DEALERS TO PERFORM THIS INSPECTION ON VEHICLES IN INVENTORY PRIOR TO BEING RETAILED TO ENSURE CUSTOMER SATISFACTION."
Associated Products (1)Associated Documents - July 27, 2016•Document ID: 10091413Service Bulletin/Repair InstructionsENGINE
- Mfr Comm. #:
- NTB14-012D
- Date Added:
- February 13, 2017
- Manufacturer:
- NISSAN
Summary"REMOTE ENGINE START NOT WORKING THIS BULLETIN HAS BEEN AMENDED. CHANGES HAVE BEEN MADE TO ITEMS 1, 4, AND 13 IN THE SUPPLEMENTAL DIAGNOSIS TABLE. NO OTHER CHANGES HAVE BEEN MADE. PLEASE DISCARD PREVIOUS VERSIONS OF THIS BULLETIN. SERVICE INFORMATION IF A CUSTOMER STATES THE REMOTE ENGINE START (RES) FEATURE OF AN APPLIED VEHICLE IS NOT WORKING, MAKE SURE THE SYSTEM IS PROPERLY SET TO OPERATE: -THE IGNITION IS TURNED OFF -THE SHIFT SELECTOR IS IN PARK (P) -THE HOOD/DOORS/TRUNK LID/LIFT GATE ARE COMPLETELY CLOSED -NO OTHER OF THE VEHICLES INTELLIGENT KEYS (I-KEYS) ARE INSIDE, OR WITHIN STARTING RANGE OF, THE VEHICLE -THE I-KEY/KEY FOB (KEY FOB) IS WITHIN THE OPERATING RANGE OF 197 FT OR 60 M IF THE ABOVE CONDITIONS ARE MET, RES SHOULD WORK. 1. POINT THE KEY FOB AT THE VEHICLE. 2. PRESS THE LOCK BUTTON. 3. PRESS AND HOLD THE RES BUTTON WITHIN FIVE (5) SECONDS OF PRESSING THE LOCK BUTTON, UNTIL THE TURN SIGNAL LIGHTS TURN ON. WHENEVER AN APPLIED VEHICLE HAS A CONCERN WITH THE REMOTE ENGINE START (RES) FEATURE NOT WORKING PROPERLY, MAKE SURE TO VERIFY THE INCIDENT BEFORE STARTING ANY DIAGNOSIS AND/OR REPLACING PARTS. FOR A BETTER UNDERSTANDING OF THE RES SYSTEM, REFER TO SECTION 3: PRE-DRIVING CHECKS AND ADJUSTMENTS > REMOTE ENGINE START OF THE APPLIED VEHICLES OWNERS MANUAL. WHEN DIAGNOSING RES OPERATION, USE THE SUPPLEMENTAL RES SERVICE INFORMATION AND SUPPLEMENTAL DIAGNOSIS TABLE (STARTING ON PAGE 2) IN ADDITION TO THE ESM."
Associated Products (12)Associated Documents - July 22, 2016•Document ID: 10091409Service Bulletin/Repair InstructionsELECTRICAL SYSTEM:IGNITION
- Mfr Comm. #:
- NTB09-118D
- Date Added:
- February 13, 2017
- Manufacturer:
- NISSAN
Summary"INTELLIGENT KEY BATTERY VOLTAGE CHECK AND REPLACEMENT THIS BULLETIN HAS BEEN SUPERSEDED BY NTB15-077. NISSAN; SIGNAL TECH-II INTELLIGENT KEY BATTERY TEST AND SIGNAL CHECK PLEASE DISCARD PREVIOUS VERSIONS OF THIS BULLETIN."
Associated Products (12)Associated Documents - July 22, 2016•Document ID: 10091341Service Bulletin/Repair InstructionsEQUIPMENT
- Mfr Comm. #:
- PC471 - 2016 TIT
- Date Added:
- February 13, 2017
- Manufacturer:
- NISSAN
Summary"TITAN XD QUALITY ASSURANCE HOLD A STOP SALE CONDITION IS IN EFFECT. ***** DETAILED INFORMATION ***** NISSAN IS COMMITTED TO A HIGH LEVEL OF CUSTOMER SERVICE AND SATISFACTION. THIS COMMITMENT REQUIRES NISSAN TO PERIODICALLY PLACE CERTAIN SPECIFIC VEHICLES ON A TEMPORARY QUALITY ASSURANCE (QA) HOLD TO ASSURE THAT THESE VEHICLES, AS DELIVERED TO OUR CUSTOMERS, MEET OUR EXACTING STANDARDS AND OUR CUSTOMERS EXPECTATIONS. EFFECTIVE IMMEDIATELY, NISSAN IS PLACING A TEMPORARY QUALITY ASSURANCE (QA) HOLD ON APPROXIMATELY 734 SPECIFIC MY 2016 TITAN XD (A61) VEHICLES. NOTE: ONLY CERTAIN TITAN SD VEHICLES ARE AFFECTED, AND OTHER TITAN XD VEHICLES ARE NOT AFFECTED BY THE QA HOLD, SO DEALERS NEED TO FOLLOW INSTRUCTIONS BELOW TO IDENTIFY THE AFFECTED VEHICLES. ***** WHAT DEALERS SHOULD DO ***** 1. VERIFY IF VEHICLES CURRENTLY IN DEALER INVENTORY ARE AFFECTED BY THIS QA HOLD USING SERVICE COMM I.D. PC471 NOTE: DEALERS SHOULD CONTINUE TO CHECK NEW ARRIVING INVENTORY FOR QA HOLD APPLICABILITY. 2. PLEASE DO NOT DRIVE, SELL, OR TRADE THE SPECIFIC 2016 TITAN XD VEHICLES IN DEALER INVENTORY SUBJECT TO THIS QA HOLD. 3. NO FURTHER ACTION IS NECESSARY AT THIS TIME. NISSAN WILL PROVIDE AN UPDATE BY AUGUST 5TH, 2016."
Associated Products (1)Associated Documents - July 20, 2016•Document ID: 10091081Service Bulletin/Repair InstructionsPOWER TRAIN:AUTOMATIC TRANSMISSION
- Mfr Comm. #:
- NTB16-068
- Date Added:
- February 9, 2017
- Manufacturer:
- NISSAN
Summary"2016 TITAN XD; ENGINE RPM FLARE DURING UP SHIFT AND/OR DOWN SHIFT BUMP IF YOU CONFIRM -WHEN COLD (TRANSMISSION FLUID BELOW 140°F [60°C]), THERE IS AN ENGINE RPM RISE (200 TO 500 RPM FLARE) DURING THE 1-2 SHIFT, 2-3 SHIFT, AND/OR THE 3-4 SHIFT. AND/OR -WHILE SLOWING TO A STOP, A 2-1 DOWN SHIFT BUMP IS FELT JUST BEFORE STOPPING. ACTION 1. COMPARE THE VEHICLES CURRENT TCM PART NUMBER TO THE PART NUMBER LISTED IN TABLE A ON PAGE 4. 2. IF THE CURRENT TCM PART NUMBER MATCHES A PART NUMBER LISTED IN TABLE A: A. REPROGRAM THE TCM. B. PERFORM TRANSMISSION CALIBRATION."
Associated Products (1)Associated Documents - July 14, 2016•Document ID: 10091323Service Bulletin/Repair InstructionsEQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
- Mfr Comm. #:
- PC469 - 2016 TIT
- Date Added:
- February 13, 2017
- Manufacturer:
- NISSAN
Summary"CENTER SEAT QUALITY ASSURANCE HOLD A STOP SALE CONDITION IS IN EFFECT. ***** DETAILED INFORMATION ***** NISSAN IS COMMITTED TO A HIGH LEVEL OF CUSTOMER SERVICE AND SATISFACTION. THIS COMMITMENT REQUIRES NISSAN TO PERIODICALLY PLACE CERTAIN SPECIFIC VEHICLES ON A TEMPORARY QUALITY ASSURANCE (QA) HOLD TO ASSURE THAT THESE VEHICLES, AS DELIVERED TO OUR CUSTOMERS, MEET OUR EXACTING STANDARDS AND OUR CUSTOMERS EXPECTATIONS. EFFECTIVE IMMEDIATELY, NISSAN IS PLACING A TEMPORARY QUALITY ASSURANCE (QA) HOLD ON APPROXIMATELY 23 MY 2016 TITAN (A61 AND A61D) VEHICLES. ***** WHAT DEALERS SHOULD DO ***** 1. VERIFY IF VEHICLES CURRENTLY IN DEALER INVENTORY ARE AFFECTED BY THIS QA HOLD USING SERVICE COMM I.D. PC469 NOTE: DEALERS SHOULD CONTINUE TO CHECK NEW ARRIVING INVENTORY FOR QA HOLD APPLICABILITY. 2. PLEASE DO NOT DRIVE, SELL, OR TRADE ANY OF THE 2016 TITAN VEHICLES IN DEALER INVENTORY SUBJECT TO THIS QA HOLD. 3. NO FURTHER ACTION IS NECESSARY AT THIS TIME. NISSAN WILL PROVIDE AN UPDATE BY JULY 29TH, 2016."
Associated Products (1)Associated Documents - July 12, 2016•Document ID: 10091417Service Bulletin/Repair InstructionsELECTRICAL SYSTEM:12V/24V/48V BATTERY
- Mfr Comm. #:
- NTB15-077A
- Date Added:
- February 13, 2017
- Manufacturer:
- NISSAN
Summary"NISSAN; SIGNAL TECH-II INTELLIGENT KEY BATTERY TEST AND SIGNAL CHECK THIS BULLETIN HAS BEEN AMENDED. CHANGES HAVE BEEN MADE THROUGHOUT. PLEASE DISCARD PREVIOUS VERSIONS OF THIS BULLETIN. IF YOU CONFIRM THE INTELLIGENT KEY INTERMITTENTLY OR CONTINUOUSLY DOES NOT FUNCTION. ACTION CHECK THE BATTERY CONDITION WITH THE SIGNAL TECH-II I-KEY BATTERY TEST. IMPORTANT: CONFIRM THAT THE SIGNAL TECH-II HAS THE MOST RECENT UPDATE. UPDATE CAN BE PERFORMED THROUGH ASIST / SPECIALTY TOOLS / SIGNAL TECH-II."
Associated Products (12)Associated Documents - June 27, 2016•Document ID: 10090706Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING:EXHAUST SYSTEM
- Mfr Comm. #:
- NTB16056
- Date Added:
- February 7, 2017
- Manufacturer:
- NISSAN
Summary2016 TITAN XD; EXHAUST SMELL INSIDE VEHICLE WHEN HVAC IS ON FRESH AIR
Associated Products (1)Associated Documents - June 9, 2016•Document ID: 10192840Service Bulletin/Repair InstructionsTIRES; EQUIPMENT ADAPTIVE/MOBILITY
- Mfr Comm. #:
- NTB11027B
- Date Added:
- May 10, 2021
- Manufacturer:
- NISSAN
SummarySERVICE INFORMATION Temporary tire Flat Spotting is common on New Dealer In-Stock vehicles that have not been occasionally moved. Flat Spotting can occur after the vehicle has been parked (not moved) for a few days, or longer. In most cases it is temporary. In extreme cases it can be permanent. Vehicles should be moved every 30 days, in one direction only, enough to rotate the tires 90° (see Figure 1). Moving vehicles as shown will prevent tire Flat Spotting. See this bulletin for further detail.
Associated Products (125)2017 Nissan 370Z2017 Nissan Maxima2016 Nissan 370Z2016 Nissan Altima2016 Nissan Frontier2016 Nissan GT-R2016 Nissan Juke2016 Nissan Leaf2016 Nissan Maxima2016 Nissan Murano2016 Nissan NV2016 Nissan NV2002016 Nissan Pathfinder2016 Nissan Quest2016 Nissan Rogue2016 Nissan Sentra2016 Nissan Titan2016 Nissan Versa2016 Nissan Versa Note2015 Nissan 370Z+ 105 moreAssociated Documents - June 9, 2016•Document ID: 10090650Service Bulletin/Repair InstructionsELECTRICAL SYSTEM:SOFTWARE; ENGINE
- Mfr Comm. #:
- PC465
- Date Added:
- February 7, 2017
- Manufacturer:
- NISSAN
Summary"NISSAN IS CONDUCTING A DEALER INVENTORY SERVICE ACTION TO UPDATE THE ENGINE CONTROL MODULE (ECM) SOFTWARE ON 5,412 SPECIFIC 2016 TITAN XD VEHICLES IDENTIFIED IN SERVICE COMM. ON THE AFFECTED VEHICLES, THE SOFTWARE IS BEING UPDATED TO REFINE THE MIL ILLUMINATION LOGIC. THESE VEHICLES ARE EITHER CURRENTLY IN DEALER INVENTORY OR ASSIGNED AND IN TRANSIT TO THE DEALER."
Associated Products (1)Associated Documents - June 2, 2016•Document ID: 10192835Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; ENGINE; EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
- Mfr Comm. #:
- NTB16036A
- Date Added:
- May 10, 2021
- Manufacturer:
- NISSAN
SummarySERVICE INFORMATION This bulletin provides recommendations for proper engine operation in conditions where the ambient temperature is around or below 0°C (32°F). NOTE - These recommendations are also found in the vehicle Owner?s Manual. - Always use the correct engine oil for the prevailing conditions. - Use an engine block heater (if so equipped) when the ambient temperature is at or below -18°C (0°F). - Engine block heaters are used to assist with cold temperature starting. - Some engine block heaters will operate continuously while plugged into the correct voltage electrical outlet. IMPORTANT: DO NOT use the engine block heater in temperature conditions at or above 0°C (32°F). Doing so may cause damage to the engine block heater. See this bulletin for further detail.
Associated Products (1)Associated Documents