Mercury Milan Complaints

2,579 consumer complaints on file.

#11489461October 16, 2022
STEERING
I was driving to the store, luckily only going 30mph. Suddenly the power steering stopped working, the message center displayed "service power steering now" and "service advancetrac" along with an illuminated light on the dash. I've looked into the issue and there is no recall for 2010 models. Only 2011. Knowing my way around cars, I've looked into purchasing a new steering rack and installing it but new they are $1000 or more. This issue needs to be resolved with a recall. Things could have gone a lot different if I was on the highway and this happened.
Crash:
No
Fire:
No
Injuries:
0
Deaths:
0
#11488921October 12, 2022
STEERING
The contact owns a 2011 Mercury Milan. The contact stated that upon the start of the vehicle, the power steering assist failed to operate as needed as the "service power steering" warning message appeared on the instrument panel. The contact stated that her vehicle was placed under NHTSA Campaign Number:15V340000(Steering) and was previously serviced by a dealer. The contact took the vehicle back to the dealer where she was informed that the recall had expired and that they could not offer any more assistance. The manufacturer was also notified of the failure and was given the same information as the dealer. The vehicle had yet to be repaired. The failure mileage was approximately 89,000.
Crash:
No
Fire:
No
Injuries:
0
Deaths:
0
#11488510October 9, 2022
SERVICE BRAKES
So my ABS and Traction control lights came on while driving, my steering wheel became stiff, and I had ZERO brakes. I almost hit another vehicle. After being able to pull over and safely park without hurting myself and child or anyone else, I had my husband come get my car. He said that when opening the break fluid cap it was sucked down. It "fixed" itself after the cap was fixed. After a few weeks, my 16 yr old was driving and it happened to her, she pulled over, called me. I came to get her and done what my Husband said, shutting the car off, turn the break fluid cap off see if the rubber part was sucked down, and it was , to push it back up, check fluid , put cap back on, restart car. This happens every 2-3 weeks. Driving down a very steep Canyon in Colorado I feared my breaks going out on me. I looked this issue up and there is a RECALL on 2010 Mercury Milan Hybrids just NOT for particular VIN. This is a serious issue that needs to be addressed.
Crash:
No
Fire:
No
Injuries:
0
Deaths:
0
#11488511October 9, 2022
EXTERIOR LIGHTING
My head lights are NOT sufficient. It does not have the option for 2 bulbs. I have changed out the bulbs 3 times while owning this vehicle and from the first night I drove it after owning it, I noticed the lights where very off. I drive around town and on dark roads where there is NO Road LIGHTS at night with my head lights on Bright and I DO NOT get brighted back. I have hit an animal due to the lights not being bright. I fear driving the car at night or where it's to dark because the light assembly is not proper. No warning lights.
Crash:
Yes
Fire:
No
Injuries:
0
Deaths:
0
#11488072October 5, 2022
SERVICE BRAKES
Was not able to drive my car because you had to press the breaks all the way to the ground in order for the vehicle to attempt to stop. A recall was issued for the hydraulic breaks in 2019 and no parts were available for almost a year. Car has been at the dealership being repaired since August 12, but now they are telling us that the hydraulic breaks issues has caused the break master cylinder to fail - leaving the car unsafe and undrivable but they are expecting us to pay for the replacement of the master cylinder when the dealership openly admitted this was directly caused because of the recall
Crash:
No
Fire:
No
Injuries:
0
Deaths:
0
#11486957September 28, 2022
SERVICE BRAKES, HYDRAULIC
The contact owns a 2007 Mercury Milan. The contact stated while pulling out of the driveway, the contact depressed the brake pedal because of an oncoming vehicle however, the vehicle failed to stop as needed. The contact pumped the brake pedal and the vehicle stopped in the middle of the road. The vehicle was taken to the local dealer and the contact was informed that the vehicle had passed the hydraulic control unit (HCU) test and had not experienced the failure listed in NHTSA Campaign Number: 19V904000 (Service Brakes, Hydraulic) and that no failure was found. The manufacturer was contacted and made aware of the failure. The contact was then referred to the NHTSA Hotline to file a complaint. The failure mileage was 130,000.
Crash:
No
Fire:
No
Injuries:
0
Deaths:
0
#11486715September 27, 2022
SERVICE BRAKES, AIR:ANTILOCK:ABS WARNING LIGHT, TRACTION CONTROL SYSTEM
The contact owns a 2010 Mercury Milan Hybrid. The contact stated that after driving approximately 20 MPH and coming to a stop, excessive force was required to apply the brake pedal. The contact stated that the ABS warning light, traction control, and brake warning lights were illuminated. The vehicle was taken to an independent mechanic where the failure code U3000 for the ABS module was retrieved. The contact referenced NHTSA Campaign Number: 19V904000 (Service Brakes, Hydraulic) as a possible solution to the failure however, the VIN was not included in the recall. The vehicle was not repaired. The manufacturer was made aware of the failure and advised the contact to file a complaint with the NHTSA Hotline. The approximate failure mileage was 139,000.
Crash:
No
Fire:
No
Injuries:
0
Deaths:
0
#11486103September 23, 2022
SERVICE BRAKES
The brakes failed to stop my car a week ago. A warning brake light appeared at the same time. It happened on a street near my home before I pulled onto the highway. No one was behind me. I shut engine off and when it restarted, I was able to brake, turn around, and return home. I had car towed to repair facility who examined the brakes and determined the brakes needed software update that only Ford could do as per a recall that just appeared. I had the car towed to Ford dealership where it now sits waiting to be worked into their schedule. This had also happened a year prior backing out of my driveway. Repair facility examined the brakes then, but found no issue as brakes began working again. Other than these 2 incidents, the brakes have been operating correctly. The car is available for inspection at Ford dealer in Lenoir City. TN.
Crash:
No
Fire:
No
Injuries:
0
Deaths:
0
#11484849September 16, 2022
SERVICE BRAKES, AIR BAGS
I am here to report a complaint as to Lasco Ford Lasco Ford on 2525 Owen Road Fenton, MI 48430 holding my daughter's vehicle for several days to fix 2 recalls. She is 19 and they seem to be trying to take advantage of her in telling her other things that need repair rather than just fixing the recalls. Now they are saying she needs to pay a diagnostic fee to get her car back now that she will not spend the $1000 to repair everything, they say she needs.
Crash:
No
Fire:
No
Injuries:
0
Deaths:
0
#11480026August 18, 2022
STEERING
I drove my Mercury Milan to a store a few blocks from my house and when I tried to drive home, I couldn't get the steering to turn. I turned my car off and tried again and same thing. I waited a while longer, tried again, and was able to turn it. I thought it was just a fluke. A couple days later the same thing happened and a message "Power Steering Assist Fault" appeared. My husband and I then took it to our local independent mechanic. He had to replace the steering rack and pinion. He said Ford has a recall for the 2011 Milan for this same problem but not for the 2010. I do quite a bit of interstate driving and am thankful it didn't go out while I was driving at a high rate of speed or it could have been a major safety concern (as it has been for others apparently).
Crash:
No
Fire:
No
Injuries:
0
Deaths:
0
#11478187August 8, 2022
SERVICE BRAKES
The contact owns a 2006 Mercury Milan. The contact stated while his 16-year-old daughter was driving in traffic and was making a complete stop while she was depressing on the brake pedal, the vehicle failed to stop. The contact stated that his daughter desperately depressed on the brake pedal and felt the brake pedal travel the floorboard but failed to respond causing her to strike the hitch of the vehicle in front of her causing front damage to the vehicle. No major injuries were reported and no police report was filed. The vehicle was towed to the dealer and the contact explained to the dealer that the vehicle experienced the same failure as recall NHTSA Campaign Number: 19V904000 (Service Brakes, Hydraulic), the dealer stated that the VIN was not included in the recall and that there was no failure with the brakes. The manufacturer was not notified of the failure. The failure was approximate 150.000.
Crash:
Yes
Fire:
No
Injuries:
0
Deaths:
0
#11476335July 28, 2022
AIR BAGS
In March 2021 I received important safety recall from Ford advising me that the Airbag inflator might explode in the event of a crash and may cause injury or death to the driver or passengers. My daughter still drives this car, why have they not followed up and replaced this part?
Crash:
No
Fire:
No
Injuries:
0
Deaths:
0
#11474118July 15, 2022
ELECTRICAL SYSTEM
Oct 2019 I went to My dealer to have a tire pressure sensor replaced due to a warning message. The sensor was replaced but the warning message remained. The mechanic did further checking and said I needed a smart junction box which can affect many things such as lights turn signals heat seat belts etc. Ford said they could not repair my car because they could not get this part. I recently inquired if it was available and there is still no ETA for this part. I had to pay them up front even though none are available. Is there a way that you can get this part expedited at Ford or issue a recall as it affects warnings and safety components. This part has to be programmed by the dealer so I do not think a salvage yard part is feasible not really sure.
Crash:
No
Fire:
No
Injuries:
0
Deaths:
0
#11472229July 3, 2022
AIR BAGS
I received a recall notice in March 2021 that the driver airbag needs replacement, but the part is not yet available. It still is not available! I consider this dangerous and should be fixed.
Crash:
No
Fire:
No
Injuries:
0
Deaths:
0
#11472231July 3, 2022
AIR BAGS
I received a recall notice in March 2021 that the driver airbag needs replacement, but the part is not yet available. It still is not available! I consider this dangerous and should be fixed.
Crash:
No
Fire:
No
Injuries:
0
Deaths:
0
#11470697June 23, 2022
AIR BAGS
Takata recall. The contact owns a 2010 Mercury Milan. The contact received notification of NHTSA Campaign Number: 21V158000 (Air Bags) however, the part to do the recall repair was unavailable. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.
Crash:
No
Fire:
No
Injuries:
0
Deaths:
0
#11469080June 13, 2022
STEERING
The power steering in my car just randomly started getting really hard to steer while I was driving out of my neighborhood a few days ago. I was turning a corner and it became so hard to steer, I almost got hit by another vehicle coming really fast and I had both of my small children in my car with me. I have researched and see that a 2011 is recalled for this same exact issue but my 2010 is not. I didn’t have any warning lights come on until it started locking up. I’m so upset that this is not an issue that needs to be fixed by a recall. This is so scary for myself and for my children.
Crash:
No
Fire:
No
Injuries:
0
Deaths:
0
#11467781June 6, 2022
SERVICE BRAKES, HYDRAULIC
The contact owns a 2008 Mercury Milan. The contact stated while driving 25-30 MPH, the brake pedal was depressed but went all the way to the floorboard and failed to respond. The contact was unsure whether there was a warning light illuminated. The contact stated that she coasted the vehicle on a hill and turned off the vehicle. There was no warning light illuminated. The vehicle was towed to three different independent mechanics who diagnosed that the braking system had failed. However, the failure was unrepairable. The contact became aware of NHTSA Campaign Number: 19V904000 (Service Brakes, Hydraulic) which she associated with the failure. The dealer was notified of the failure and informed the contact that the remedy was not available. The vehicle was not repaired. The manufacturer was notified of the failure and confirmed that the remedy was not yet available. The failure mileage was approximately 97,000.
Crash:
No
Fire:
No
Injuries:
0
Deaths:
0
#11467810June 6, 2022
SERVICE BRAKES, TRACTION CONTROL SYSTEM
The contact owns a 2010 Mercury Milan. The contact stated while driving approximately 20 MPH and attempting to stop the vehicle at a gate, the brake pedal was depressed but failed to stop the vehicle. The contact engaged the parking to stop the vehicle. The ABS, brakes, and traction control warning light was illuminated. The vehicle was taken to the dealer to be diagnosed. The contact was informed that the hydraulic control unit and ABS control module failed and needed to be replaced. The vehicle was not repaired due to parts not being available. The manufacturer was made aware of the failure. The approximate failure mileage was 62,200.
Crash:
No
Fire:
No
Injuries:
0
Deaths:
0
#11467509June 4, 2022
SERVICE BRAKES
Brake pedal going to floor extending stopping distance. Early in 2022 I took it in for recall S1954. HCU passed test and dealer replaced DOT3 brake fluid with DOt4. 5/24/2022 Brake pedal started going to floor again. Dealer performed self test of hcu and electronic bleed hcu and said pedal was somewhat better but needed $400 of brake work to for Brake pads, lining and turn rotors. Car functioned fine for a few days. In early June I was driving on a wet street and put on the brakes. It appeared the ABS system was trying to kick in and suddenly the pedal again went to the floor. I was barely able to miss rear-ending a city bus. I pulled into a gas station, turned the car off. When I started it again the brake pedal went to the floor. After pumping it a number of times it came back up and was again functioning. Took it to dealer on 6/1/22. Dealer again tested the hcu test which once again it passed. They could find no other problems. Dealers recommended replacing the abs modlule and master cylinder to the tune of $1,400. Seems like they can test and find out which part isn't malfunctioning (hcu which is under recall), but cant test to find out which part is malfunctioning (ABS module or master cylinder) There is obviously still serious issue with the brake system on these cars that is not being corrected by the initial hcu recall. It needs to be fixed before someone is killed. There were no warning lights or messages relating to the brakes.
Crash:
No
Fire:
No
Injuries:
0
Deaths:
0

← Back to Mercury Milan