Mazda CX-5 Service Bulletins (2018)
634 manufacturer communications on file.
- February 28, 2020•Document ID: 10171836Service Bulletin/Repair InstructionsEQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
- Mfr Comm. #:
- SA-034-20
- Date Added:
- February 29, 2020
- Manufacturer:
- MAZDA
SummaryDTC P0942:49 TROUBLESHOOTING: P0942:49 is missing from the Workshop Manual on MGSS. Follow the repair procedure below to repair the vehicle until the information is added to the Workshop Manual.
Associated Products (11)Associated Documents - February 26, 2020•Document ID: 10171843Service Bulletin/Repair InstructionsWHEELS
- Mfr Comm. #:
- 02-004-20-3685
- Date Added:
- February 29, 2020
- Manufacturer:
- MAZDA
SummarySome automotive cleaning products contain strong acid or alkali. When these types of cleaners are used to clean the wheels on Mazda vehicles, the chemicals contents penetrate the clear coating of the wheel surface and damage the paint under the clear coating. The damaged area has the appearance of dark stains.
Associated Products (39)2020 Mazda CX-32020 Mazda CX-302020 Mazda CX-52020 Mazda CX-92020 Mazda Mazda32020 Mazda Mazda62020 Mazda MX-52019 Mazda CX-32019 Mazda CX-52019 Mazda CX-92019 Mazda Mazda32019 Mazda Mazda62019 Mazda MX-52018 Mazda CX-32018 Mazda CX-52018 Mazda CX-92018 Mazda Mazda32018 Mazda Mazda62018 Mazda MX-52017 Mazda CX-3+ 19 moreAssociated Documents - February 26, 2020•Document ID: 10171792Service Bulletin/Repair InstructionsPOWER TRAIN
- Mfr Comm. #:
- SA-030-20
- Date Added:
- February 27, 2020
- Manufacturer:
- MAZDA
SummaryService part Automatic Transaxles (ATX) manufactured on or after July, 2018 are shipped with a blank TCM that requires configuration. NOTE: The following Caution is included with every ATX that requires configuration.
Associated Products (40)2020 Mazda CX-32020 Mazda CX-302020 Mazda CX-52020 Mazda CX-92020 Mazda Mazda32020 Mazda Mazda62020 Mazda MX-52019 Mazda CX-32019 Mazda CX-52019 Mazda CX-92019 Mazda Mazda32019 Mazda Mazda62019 Mazda MX-52018 Mazda CX-32018 Mazda CX-52018 Mazda CX-92018 Mazda Mazda32018 Mazda Mazda62018 Mazda MX-52017 Mazda CX-3+ 20 moreAssociated Documents - February 20, 2020•Document ID: 10171844Service Bulletin/Repair InstructionsSERVICE BRAKES, HYDRAULIC
- Mfr Comm. #:
- 04-003-20-3668
- Date Added:
- February 29, 2020
- Manufacturer:
- MAZDA
SummarySome vehicles may exhibit grooves (1) in rear brake disc plate(s), as shown below. This concern is mostly found on new or low mileage vehicles, when the brakes are new. The grooves may be caused through abrasion from the accumulation of metal particles from the rear brake disc plates. The metal particles get caught between the brake pads and disc plates causing groove damage. To eliminate this concern, the disc plate surface honing process has been changed to reduce metal particle formation.
Associated Products (10)Associated Documents - February 18, 2020•Document ID: 10171780Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; EQUIPMENT ADAPTIVE/MOBILITY
- Mfr Comm. #:
- SA-011-20a
- Date Added:
- February 27, 2020
- Manufacturer:
- MAZDA
SummarySome customers may complain about a MAZDA CONNECT system reboot or blank screen. Use the troubleshooting chart below to repair the vehicle.
Associated Products (30)2020 Mazda CX-32020 Mazda CX-52020 Mazda CX-92020 Mazda Mazda62020 Mazda MX-52019 Mazda CX-32019 Mazda CX-52019 Mazda CX-92019 Mazda Mazda62019 Mazda MX-52018 Mazda CX-32018 Mazda CX-52018 Mazda CX-92018 Mazda Mazda32018 Mazda Mazda62018 Mazda MX-52017 Mazda CX-32017 Mazda CX-52017 Mazda CX-92017 Mazda Mazda3+ 10 moreAssociated Documents - February 13, 2020•Document ID: 10171841Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- 01-003-20-3654
- Date Added:
- February 29, 2020
- Manufacturer:
- MAZDA
SummarySome customers may experience a check engine light illumination with DTCs P24C6:00, P24AE:00, P24B1:00 and/or P24AF:00 stored in PCM memory. P24C6:00 - PM sensor: internal temperature sensor malfunction (1DC DTC) P24AE:00 - PM sensor control circuit range/performance problem (1DC DTC) P24B1:00 - PM sensor circuit high input (1DC DTC) P24AF:00 - PM sensor circuit range/performance (2DC DTC) [Particulate Matter (PM) Sensor] DTCs may be caused by the following: DTC P24C6:00: May be caused by water condensation in the exhaust system which may accumulate on the PM sensor element and result in cracks. DTCs P24AE:00, P24B1:00, P24AF:00: May also be caused by water condensation in the exhaust system which may accumulate on the PM sensor element and result in an incorrect output signal. To eliminate these DTCs, the following improvements have been made: The PM sensor has been improved (DTC P24C6:00). The mounting orientation of the PM sensor has been changed to reduce water accumulation (DTCs P24AE:00, P24B1:00, P24AF:00). The detection condition of DTCs P24AE:00 and P24B1:00 has been changed to 2DC, which will no longer detect a temporary incorrect sensor output
Associated Products (2)Associated Documents - February 11, 2020•Document ID: 10171787Service Bulletin/Repair InstructionsEQUIPMENT
- Mfr Comm. #:
- SA-026-20
- Date Added:
- February 27, 2020
- Manufacturer:
- MAZDA
SummaryUse the symptom troubleshooting tables below to diagnose MAZDA CONNECT concerns. Audio System, Bluetoothî, Center Dislay, DTC, i-ACTIVESENSE, Maintenance Monitor, Navigation, Noise, Reboot / Frozen Screen / Slow Response, USB / Aux Voice Command, How to Check Navi SD Card VIN Lock.
Associated Products (30)2020 Mazda CX-32020 Mazda CX-52020 Mazda CX-92020 Mazda Mazda62020 Mazda MX-52019 Mazda CX-32019 Mazda CX-52019 Mazda CX-92019 Mazda Mazda62019 Mazda MX-52018 Mazda CX-32018 Mazda CX-52018 Mazda CX-92018 Mazda Mazda32018 Mazda Mazda62018 Mazda MX-52017 Mazda CX-32017 Mazda CX-52017 Mazda CX-92017 Mazda Mazda3+ 10 moreAssociated Documents - February 11, 2020•Document ID: 10171786Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; ENGINE AND ENGINE COOLING; EQUIPMENT ADAPTIVE/MOBILITY; EQUIPMENT
- Mfr Comm. #:
- SA-025-20
- Date Added:
- February 27, 2020
- Manufacturer:
- MAZDA
SummaryA valve tapping or knocking noise may be heard from the top end after the engine cools down (the vehicle is parked overnight) or after it has been idling for an extended time. The tapping noise will decreases as the vehicle is being driven or if the rpm is held above 2500-3000 RPM. This may be caused by the valve Hydraulic Lifters (HLA) bleeding down as the engine cools or when the engine has been idling for an extended period of time, creating excessive valve lash clearance.
Associated Products (4)Associated Documents - January 29, 2020•Document ID: 10170941Service Bulletin/Repair InstructionsSERVICE BRAKES, HYDRAULIC
- Mfr Comm. #:
- SA-019-20
- Date Added:
- February 4, 2020
- Manufacturer:
- MAZDA
SummarySome vehicles exhibit brake related concerns such as brake noise, brake judder or brake dragging. If you encounter a customer complaint for any one of these symptoms, refer to the following information to understand why symptoms may occur, and to better assist the customer in resolving their specific brake concern.
Associated Products (34)2020 Mazda CX-32020 Mazda CX-302020 Mazda CX-52020 Mazda CX-92020 Mazda Mazda32020 Mazda Mazda62019 Mazda CX-32019 Mazda CX-52019 Mazda CX-92019 Mazda Mazda32019 Mazda Mazda62018 Mazda CX-32018 Mazda CX-52018 Mazda CX-92018 Mazda Mazda32018 Mazda Mazda62017 Mazda CX-32017 Mazda CX-52017 Mazda CX-92017 Mazda Mazda3+ 14 moreAssociated Documents - January 23, 2020•Document ID: 10170814Service Bulletin/Repair InstructionsSTEERING
- Mfr Comm. #:
- 02-003-20-3677
- Date Added:
- January 30, 2020
- Manufacturer:
- MAZDA
SummarySome customers may complain that the steering wheel is off center more than 3ð even when driving straight on a flat road. Customers having this concern should have their vehicle repaired using the following repair procedure.
Associated Products (49)2020 Mazda CX-32020 Mazda CX-302020 Mazda CX-52020 Mazda CX-92020 Mazda Mazda32020 Mazda Mazda62020 Mazda MX-52019 Mazda CX-32019 Mazda CX-52019 Mazda CX-92019 Mazda Mazda32019 Mazda Mazda62019 Mazda MX-52018 Mazda CX-32018 Mazda CX-52018 Mazda CX-92018 Mazda Mazda32018 Mazda Mazda62018 Mazda MX-52017 Mazda CX-3+ 29 moreAssociated Documents - January 23, 2020•Document ID: 10170813Service Bulletin/Repair InstructionsEQUIPMENT ADAPTIVE/MOBILITY; ELECTRICAL SYSTEM
- Mfr Comm. #:
- 01-002-20-3678
- Date Added:
- January 30, 2020
- Manufacturer:
- MAZDA
SummarySome vehicles may experience the CHECK ENGINE LIGHT ON with DTC P2610 and P2507 stored in memory after engine start and room fuse 15A (A) removed.ï· P2610:00: Instrument cluster internal engine off timer performance problem ï· P2507:00: PCM battery voltage low input. As a past malfunction, the customer will not notice it (no warning light illuminated), but the DTC may be found during a vehicle service. P2507 in this situation is only applicable on 2016 and later models. This is caused by the engine being started 3 or more times after a short duration of engine off (less than 15 seconds) with the room fused removed. NOTE: The odometer will display âÂÂF0-002â during transport mode (room fuse 15A removed). Transport mode is canceled when room fuse 15A is installed or the vehicle odometer is more than 12.4mi (20km).Vehicles in dealer inventory with this concern should be repaired using the following repair procedure.
Associated Products (35)2020 Mazda CX-32020 Mazda CX-52020 Mazda CX-92020 Mazda Mazda62020 Mazda MX-52019 Mazda CX-32019 Mazda CX-52019 Mazda CX-92019 Mazda Mazda62019 Mazda MX-52018 Mazda CX-32018 Mazda CX-52018 Mazda CX-92018 Mazda Mazda32018 Mazda Mazda62018 Mazda MX-52017 Mazda CX-32017 Mazda CX-52017 Mazda CX-92017 Mazda Mazda3+ 15 moreAssociated Documents - January 15, 2020•Document ID: 10170943Service Bulletin/Repair InstructionsEQUIPMENT ADAPTIVE/MOBILITY; ELECTRICAL SYSTEM
- Mfr Comm. #:
- SA-011-20
- Date Added:
- February 4, 2020
- Manufacturer:
- MAZDA
SummarySome customers may complain about a MAZDA CONNECT system reboot or blank screen. Use the troubleshooting chart below to repair the vehicle.
Associated Products (24)2019 Mazda CX-32019 Mazda CX-52019 Mazda CX-92019 Mazda MX-52018 Mazda CX-32018 Mazda CX-52018 Mazda CX-92018 Mazda Mazda32018 Mazda Mazda62018 Mazda MX-52017 Mazda CX-32017 Mazda CX-52017 Mazda CX-92017 Mazda Mazda32017 Mazda Mazda62017 Mazda MX-52016 Mazda CX-32016 Mazda CX-52016 Mazda CX-92016 Mazda Mazda3+ 4 moreAssociated Documents - January 15, 2020•Document ID: 10170829Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING; STRUCTURE; ELECTRICAL SYSTEM
- Mfr Comm. #:
- SA-009-20
- Date Added:
- January 30, 2020
- Manufacturer:
- MAZDA
SummaryLACK OF POWER UNDER HEAVY LOAD WITH NO WARNING LIGHTS OR DTCS: Some customers may complain of a lack of power under heavy load without any warning lights or DTCs. This concern may be due to a loose or detached hood weatherstrip, which can cause a blockage or restriction in the air intake system.
Associated Products (36)2020 Mazda CX-32020 Mazda CX-52020 Mazda CX-92020 Mazda Mazda62020 Mazda MX-52019 Mazda CX-32019 Mazda CX-52019 Mazda CX-92019 Mazda Mazda62019 Mazda MX-52018 Mazda CX-32018 Mazda CX-52018 Mazda CX-92018 Mazda Mazda32018 Mazda Mazda62018 Mazda MX-52017 Mazda CX-32017 Mazda CX-52017 Mazda CX-92017 Mazda Mazda3+ 16 moreAssociated Documents - January 13, 2020•Document ID: 10170819Service Bulletin/Repair InstructionsSTRUCTURE:BODY; EQUIPMENT
- Mfr Comm. #:
- 09-008-20-3675
- Date Added:
- January 30, 2020
- Manufacturer:
- MAZDA
SummarySome vehicles may experience stains appearing on the hood, roof and/or trunk of the vehicle. This concern is most likely to be found in a cold weather areas just after the RAPGARD is removed at PDI. This may be caused by moisture which has been trapped and condensed between the paint and the RAPGARD. These types of stains can be removed with a heat gun or an infrared drier. If you encounter this concern during PDI, use a heat gun or an infrared drier to apply heat to the affected area to remove the stain(s).
Associated Products (18)Associated Documents - January 13, 2020•Document ID: 10170818Service Bulletin/Repair InstructionsSEATS
- Mfr Comm. #:
- 09-007-20-3674
- Date Added:
- January 30, 2020
- Manufacturer:
- MAZDA
SummaryAt PDI or when new vehicle is delivered, some customers may complain about wrinkles on the leather seat cushion and/or seat back surface. Customers having this concern should have their vehicle repaired by a qualified upholstery repair specialist using the following repair procedure.
Associated Products (19)Associated Documents - January 13, 2020•Document ID: 10170817Service Bulletin/Repair InstructionsEQUIPMENT
- Mfr Comm. #:
- 09-006-20-3673
- Date Added:
- January 30, 2020
- Manufacturer:
- MAZDA
SummaryWhen encountering a vehicle with paint damage, refer to the "Mazda Pocket Paint Guide" to determine cause, prevention, remedy, and warranty coverage (if applicable). Copies of the Mazda Pocket Paint Guide are available for order on Mazda e-Store (part number: 9999-95-MPPG-12).
Associated Products (144)2020 Mazda CX-32020 Mazda CX-302020 Mazda CX-52020 Mazda CX-92020 Mazda Mazda32020 Mazda Mazda62020 Mazda MX-52019 Mazda CX-32019 Mazda CX-52019 Mazda CX-92019 Mazda Mazda32019 Mazda Mazda62019 Mazda MX-52018 Mazda CX-32018 Mazda CX-52018 Mazda CX-92018 Mazda Mazda32018 Mazda Mazda62018 Mazda MX-52017 Mazda CX-3+ 124 moreAssociated Documents - January 10, 2020•Document ID: 10170825Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING; EQUIPMENT
- Mfr Comm. #:
- SA-005-20
- Date Added:
- January 30, 2020
- Manufacturer:
- MAZDA
SummaryTHUMPING/RATTLING NOISE FROM ENGINE COMPARTMENT: Some customers may complain about an unusual thumping/rattling noise coming from the engine compartment. The noise is most pronounced under the following conditions: ï· Engine at idle ï· Transmission in drive ï· Foot on the brake pedal ï· A/C OFF ï· Audio OFF The noise may be caused by loose fitting heater hoses vibrating the heater hose bracket protector.
Associated Products (2)Associated Documents - January 9, 2020•Document ID: 10170661Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; EQUIPMENT
- Mfr Comm. #:
- 09-003-20-3671
- Date Added:
- January 23, 2020
- Manufacturer:
- MAZDA
SummaryIn accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealerâÂÂs responsibility to comply with Federal, State, and local laws concerning odometer and related documentation requirements when providing a repair or replacement. ï· Mazda vehicles are manufactured with tamper-proof speedometers. ï· When a speedometer is replaced, the new speedometer will read zero (0) miles. ï· This procedure is extremely important to accurately represent actual vehicle mileage. ï· Prior to speedometer removal, complete the information required on the âÂÂSpeedometer Replacement LabelâÂÂ. Labels can only be ordered through Mazda eStore. ï· In an effort to achieve a higher level of Customer Experience and retain the value of MazdaâÂÂs vehicles, MNAO Warranty Operations is allowing all Mazda dealers to utilize a third party, SPECMO Enterprises, Inc., for Instrument Panel Cluster (IPC) odometer setting service. With the use of SPECMOâÂÂs services, it is possible that the odometer will be set between 10 to 31 miles over the odometer mileage at the time of replacement for both warranty and customer pay repairs. Please make sure that the customer is aware that there may be a slight variance to the odometer, in which case the customer may have to accept the slightly higher mileage. Since odometer setting service is not part of the warranty repair, it is not warrantable nor required, but optional. However, Mazda Warranty policy provides after- warranty assistance (AWA) or DSA that can be utilized to cover this service expense.
Associated Products (197)2020 Mazda CX-32020 Mazda CX-302020 Mazda CX-52020 Mazda CX-92020 Mazda Mazda32020 Mazda Mazda62020 Mazda MX-52019 Mazda CX-32019 Mazda CX-52019 Mazda CX-92019 Mazda Mazda22019 Mazda Mazda32019 Mazda Mazda62019 Mazda MX-52018 Mazda CX-32018 Mazda CX-52018 Mazda CX-92018 Mazda Mazda22018 Mazda Mazda32018 Mazda Mazda5+ 177 moreAssociated Documents - January 9, 2020•Document ID: 10170656Service Bulletin/Repair InstructionsSUSPENSION; EQUIPMENT; EQUIPMENT ADAPTIVE/MOBILITY
- Mfr Comm. #:
- 02-002-20-3651
- Date Added:
- January 23, 2020
- Manufacturer:
- MAZDA
SummarySome customers may complain of signs of oil on the struts or shock absorbers. In most cases the oil that is present is normal, and a result of the oil that remains on the shaft during the normal sweeping process of the shaft seal. Follow the inspection guidelines below to determine if the condition is a result of the normal sweeping process or a failure of the shaft seal.
Associated Products (143)2020 Mazda CX-32020 Mazda CX-52020 Mazda CX-92020 Mazda Mazda32020 Mazda Mazda62020 Mazda MX-52019 Mazda CX-32019 Mazda CX-52019 Mazda CX-92019 Mazda Mazda32019 Mazda Mazda62019 Mazda MX-52018 Mazda CX-32018 Mazda CX-52018 Mazda CX-92018 Mazda Mazda32018 Mazda Mazda62018 Mazda MX-52017 Mazda CX-32017 Mazda CX-5+ 123 moreAssociated Documents - January 8, 2020•Document ID: 10170660Service Bulletin/Repair InstructionsSEATS; EQUIPMENT ADAPTIVE/MOBILITY
- Mfr Comm. #:
- 09-002-20-3667
- Date Added:
- January 23, 2020
- Manufacturer:
- MAZDA
SummarySome customer may complain of warping on the driver and/or passenger side seat cushion trim, which may cause poor appearance complaints. This is caused by a gap between the leather seat surface and the seat cushion pad due to insufficient tension on the seat trim. To eliminate this concern, a non-woven fabric has been attached to the backside of the seat trim to increase tension.
Associated Products (2)Associated Documents