Jeep Grand Cherokee Service Bulletins
4,246 manufacturer communications on file.
- December 9, 2014•Document ID: 10062943Service Bulletin/Repair InstructionsELECTRICAL SYSTEM:SOFTWARE
- Mfr Comm. #:
- 08-109-14
- Date Added:
- April 26, 2016
- Manufacturer:
- JEEP
SummarySUMMARY TO BE PROVIDED ON A FUTURE DATE.
Associated Products (7)Associated Documents - December 9, 2014•Document ID: 10062942Service Bulletin/Repair InstructionsELECTRICAL SYSTEM:SOFTWARE
- Mfr Comm. #:
- 08-108-14
- Date Added:
- April 26, 2016
- Manufacturer:
- RAM
SummarySUMMARY TO BE PROVIDED ON A FUTURE DATE.
Associated Products (7)Associated Documents - December 5, 2014•Document ID: 10229884Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- 0800314
- Date Added:
- January 17, 2023
- Manufacturer:
- JEEP
SummaryIntegrated Center Stack Missing Buttons This bulletin involves replacing the integrated center stack (ICS) bezel. Summit Edition (sales code AAU) vehicles built with incorrect ICS, missing buttons for Front & Rear Park Assist (sales code XAG) and Forward Collision Warning (sales code LSR).
Associated Products (1)Associated Documents - December 5, 2014•Document ID: 10229882Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; POWER TRAIN
- Mfr Comm. #:
- 2100314a
- Date Added:
- January 17, 2023
- Manufacturer:
- DODGE
SummaryFlash: 845RE Transmission Shift Enhancements, 2-1 Downshift This bulletin involves reprogramming the Transmission Control Module (TCM) with the latest available software. The following TCM calibration improvements are available for vehicles equipped an 845RE Automatic Transmission (Sales Code DFL). These updates are listed by vehicle and engine.LD and LX vehicles equipped with a 3.6L engine (Sales Code ERB) Software to correct a harsh bump feel during a 2-1 downshift. Software to enable the scan tool based transmission ?Quick Learn.? Software to address customer concerns of Malfunction Indicator Lamp (MIL) illumination and Diagnostic Trouble Code (DTC) P215C Output Shaft Speed, Wheel Speed Correlation setting on AWD equipped vehicles.LX and WK vehicles equipped with a 3.0L engine (Sales Code EHD) Software to correct a harsh bump feel during a 2-1 downshift.WK vehicles e
Associated Products (5)Associated Documents - December 5, 2014•Document ID: 10139882Service Bulletin/Repair InstructionsEQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC.
- Mfr Comm. #:
- 08-003-14 REV. A
- Date Added:
- June 11, 2018
- Manufacturer:
- JEEP
SummaryIntegrated Center Stack Missing Buttons This bulletin involves replacing the integrated center stack (ICS) bezel. Summit Edition (sales code AAU) vehicles built with incorrect ICS, missing buttons for Front & Rear Park Assist (sales code XAG) and Forward Collision Warning (sales code LSR).
Associated Products (1)Associated Documents - December 5, 2014•Document ID: 10139880Service Bulletin/Repair InstructionsPOWER TRAIN; ELECTRICAL SYSTEM:SOFTWARE
- Mfr Comm. #:
- 21-003-14 REV. A
- Date Added:
- June 11, 2018
- Manufacturer:
- RAM
SummaryFlash: 845RE Transmission Shift Enhancements, 2-1 Downshift This bulletin involves reprogramming the Transmission Control Module (TCM) with the latest available software. The following TCM calibration improvements are available for vehicles equipped an 845RE Automatic Transmission (Sales Code DFL). These updates are listed by vehicle and engine.LD and LX vehicles equipped with a 3.6L engine (Sales Code ERB) Software to correct a harsh bump feel during a 2-1 downshift. Software to enable the scan tool based transmission ?Quick Learn.? Software to address customer concerns of Malfunction Indicator Lamp (MIL) illumination and Diagnostic Trouble Code (DTC) P215C Output Shaft Speed, Wheel Speed Correlation setting on AWD equipped vehicles.LX and WK vehicles equipped with a 3.0L engine (Sales Code EHD) Software to correct a harsh bump feel during a 2-1 downshift.WK vehicles equipped with a 3.6L engine (Sales Code ERB) Software to correct a harsh bump feel during a 2-1 downshift.DS vehicles equipped with 3.6L engine (Sales Code ERB) Software to correct a harsh bump feel during a 2-1 downshift. Software to address a customer?s concern of less than desired shift quality in Four Wheel Drive (4wd) Low mode during medium to heavy acceleration. Software to address customer concerns of Malfunction Indicator Lamp (MIL) illumination and Diagnostic Trouble Code (DTC) P215C Output Shaft Speed, Wheel Speed Correlation setting on AWD equipped vehicles. Software improvements to powertrain braking in Tow/Haul mode. Software to improve downshift response from a medium to heavy pedal acceleration. Driveability improvements at higher altitudes. Software to improve acceleration during cruise control operation Software to correct a condition where DTC U11C3 - ESM Lost Communication With TCM On D-Pt CAN may have been displayed instead of U11E3 - TCM Lost communication with ESM On D-PT CAN.WD vehicles equipped with a 3.6L engine (Sales Code ERB)
Associated Products (5)Associated Documents - December 5, 2014•Document ID: 10069236Service Bulletin/Repair InstructionsELECTRICAL SYSTEM:SOFTWARE
- Mfr Comm. #:
- 21-003-14REV.A
- Date Added:
- June 2, 2016
- Manufacturer:
- JEEP
SummarySUMMARY TO BE PROVIDED ON A FUTURE DATE.
Associated Products (5)Associated Documents - December 5, 2014•Document ID: 10061892Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- 08-003-14REV.A
- Date Added:
- April 12, 2016
- Manufacturer:
- JEEP
SummarySUMMARY TO BE PROVIDED ON A FUTURE DATE.
Associated Products (1)Associated Documents - November 26, 2014•Document ID: 10218232Service Bulletin/Repair InstructionsWHEELS; ELECTRICAL SYSTEM; POWER TRAIN; STEERING
- Mfr Comm. #:
- 21-040-14
- Date Added:
- August 22, 2022
- Manufacturer:
- JEEP
SummaryFlash: 8HP70 Transmission Shift Enhancements This bulletin involves reprogramming of the Transmission Control Module (TCM) with the latest available software. A small number of customers may experience one of more of the following conditions. Intermittent delayed upshifts in 1st or 2nd gear. Less than desired shift quality when operating the vehicle in Four Wheel Drive (4wd) Low mode. With the vehicle stationary and the Selec-Terrain system set to Snow Mode, the transmission will perform a 2-1 downshift when pressing the (+) steering wheel mounted shift paddle instead of remaining in 2nd gear.
Associated Products (1)Associated Documents - November 26, 2014•Document ID: 10218231Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; EQUIPMENT; POWER TRAIN
- Mfr Comm. #:
- 21-017-14
- Date Added:
- August 22, 2022
- Manufacturer:
- JEEP
SummaryFlash: Transmission Shift And Driveability Enhancements This bulletin involves selectively erasing and reprogramming the Powertrain Control Module (PCM) and Transmission Control Module (TCM) with new software.Both the PCM and TCM must be up to date for these changes to be effective. The customer may indicate that they are not satisfied with the shift quality of the transmission. Improvements to the transmission calibration have been made to the following:Upshift Improvements Shift quality in Normal Mode Shift quality in Sport Mode Shift inhibit while transitioning in/out of MDSDownshift Improvements Downshift quality while accelerating Downshift quality while coastingGeneral Improvements Torque converter clutch control during interlocked downshifts Torque converter clutch control during accelerator pedal tip in/out High speed gear hunting (shifting back/forth repeatedly between two gears) Allow 3rd gear launch at high altitude while in Snow Mode 2nd gear launch quality in ECO mode Improved reverse speed Display 2nd gear when entering Manual Mode from Snow or ECO Mode
Associated Products (1)Associated Documents - November 26, 2014•Document ID: 10139865Service Bulletin/Repair InstructionsELECTRICAL SYSTEM:SOFTWARE; POWER TRAIN
- Mfr Comm. #:
- 21-040-14
- Date Added:
- June 11, 2018
- Manufacturer:
- JEEP
SummaryFlash: 8HP70 Transmission Shift Enhancements This bulletin involves reprogramming of the Transmission Control Module (TCM) with the latest available software. A small number of customers may experience one of more of the following conditions. Intermittent delayed upshifts in 1st or 2nd gear. Less than desired shift quality when operating the vehicle in Four Wheel Drive (4wd) Low mode. With the vehicle stationary and the Selec-Terrain system set to Snow Mode, the transmission will perform a 2-1 downshift when pressing the (+) steering wheel mounted shift paddle instead of remaining in 2nd gear.
Associated Products (1)Associated Documents - November 26, 2014•Document ID: 10139864Service Bulletin/Repair InstructionsPOWER TRAIN
- Mfr Comm. #:
- 21-017-14 REV. A
- Date Added:
- June 11, 2018
- Manufacturer:
- JEEP
SummaryFlash: Transmission Shift And Driveability Enhancements This bulletin involves selectively erasing and reprogramming the Powertrain Control Module (PCM) and Transmission Control Module (TCM) with new software.Both the PCM and TCM must be up to date for these changes to be effective. The customer may indicate that they are not satisfied with the shift quality of the transmission. Improvements to the transmission calibration have been made to the following:Upshift Improvements Shift quality in Normal Mode Shift quality in Sport Mode Shift inhibit while transitioning in/out of MDSDownshift Improvements Downshift quality while accelerating Downshift quality while coastingGeneral Improvements Torque converter clutch control during interlocked downshifts Torque converter clutch control during accelerator pedal tip in/out High speed gear hunting (shifting back/forth repeatedly between two gears) Allow 3rd gear launch at high altitude while in Snow Mode 2nd gear launch quality in ECO mode Improved reverse speed Display 2nd gear when entering Manual Mode from Snow or ECO Mode
Associated Products (1)Associated Documents - November 26, 2014•Document ID: 10069314Service Bulletin/Repair InstructionsELECTRICAL SYSTEM:SOFTWARE
- Mfr Comm. #:
- 21-017-14REV.A
- Date Added:
- June 2, 2016
- Manufacturer:
- JEEP
SummarySUMMARY TO BE PROVIDED ON A FUTURE DATE.
Associated Products (1)Associated Documents - November 26, 2014•Document ID: 10063741Service Bulletin/Repair InstructionsELECTRICAL SYSTEM:SOFTWARE
- Mfr Comm. #:
- 21-040-14
- Date Added:
- May 9, 2016
- Manufacturer:
- JEEP
SummarySUMMARY TO BE PROVIDED ON A FUTURE DATE.
Associated Products (1)Associated Documents - November 26, 2014•Document ID: 10232024Service Bulletin/Repair InstructionsPOWER TRAIN
- Mfr Comm. #:
- 2104014
- Date Added:
- February 21, 2023
- Manufacturer:
- JEEP
Summary8HP70 Transmission Shift Enhancements
Associated Products (1)Associated Documents - November 26, 2014•Document ID: 10232010Service Bulletin/Repair InstructionsPOWER TRAIN:AUTOMATIC TRANSMISSION
- Mfr Comm. #:
- 2101714
- Date Added:
- February 21, 2023
- Manufacturer:
- JEEP
SummaryTransmission Shift And Driveability Enhancements
Associated Products (1)Associated Documents - November 25, 2014•Document ID: 10218228Service Bulletin/Repair InstructionsSUSPENSION
- Mfr Comm. #:
- 02-004-14
- Date Added:
- August 22, 2022
- Manufacturer:
- JEEP
SummaryVehicle Leads or Drifts To The Left - Right Hand Drive (RHD) This bulletin involves an alignment specification change for camber. Customer may describe a lead or drift to the left condition at steady state speeds of 56 KPH (35 MPH) and above.
Associated Products (3)Associated Documents - November 25, 2014•Document ID: 10218225Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; POWER TRAIN; FUEL SYSTEM, GASOLINE
- Mfr Comm. #:
- 21-039-14
- Date Added:
- August 22, 2022
- Manufacturer:
- JEEP
SummaryFlash: Transmission Shift Enhancements This bulletin involves reprogramming of the Transmission Control Module (TCM) with the latest available software. The following TCM calibration improvements are available for vehicles equipped with the 845RE 8 speed transmission (sales code DFL) or 8HP70 8 speed transmission (sales code DFD or DFK). These improvements are listed per engine application.3.0L gas engine (sales code EHD) Improved upshift timing. Improved torque converter engagement. Improved shift timing during tow mode operation. Improved shift points during aggressive driving. Calibration improvement to correct bump feel during 2-1 downshift. Improved shift timing while in snow, base, and hill modes.3.6L gas engine (sales code ERB) Improved 4-3 and 3-2 downshifts. Improved shift timing at higher altitudes. Improved shift timing while in sand mode. Calibration improvement for multi-gear downshift timing during passing maneuvers. Calibration improvement for intermittent delayed upshift.5.7L gas engine (sales code EZH) Improved upshift timing in eco, base, and hill modes and while using cruise. Improved 8-7, 3-2, and 2-1 downshift timing Improved shift timing at higher altitudes. Improved torque converter engagement.
Associated Products (1)Associated Documents - November 25, 2014•Document ID: 10218222Service Bulletin/Repair InstructionsELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL
- Mfr Comm. #:
- 08-050-14
- Date Added:
- August 22, 2022
- Manufacturer:
- JEEP
SummaryFlash: Instrument Panel Cluster Update For Japan And South Korea This bulletin involves flashing the instrument cluster. The customer may experience one or all of the following: - Korean characters in the instrument cluster for a few seconds when the door is opened and when the engine is turned off. The wrong characters only appear for a few seconds then the cluster displays the correct characters. - ?Low Battery Voltage? text message shown erroneously in the EVIC.
Associated Products (1)Associated Documents - November 25, 2014•Document ID: 10218221Service Bulletin/Repair InstructionsPOWER TRAIN; ELECTRICAL SYSTEM
- Mfr Comm. #:
- 21-038-14
- Date Added:
- August 22, 2022
- Manufacturer:
- JEEP
SummaryFlash: 8HP70 SRT Transmission Shift Enhancements This bulletin involves reprogramming the Transmission Control Module (TCM) with the latest available software. A small number of customers may experience one of more of the following conditions. Harsh or inconsistent upshift that happens intermittently. Harsh or inconsistent downshift that happens intermittently while coasting or during passing maneuvers. Intermittent delayed shift from 6th gear during aggressive high speed driving.
Associated Products (1)Associated Documents