Chrysler (FCA US, LLC) is recalling certain 2020-2024 Jeep Gladiator and 2018-2024 Jeep Wrangler vehicles. The instrument panel cluster may experience an internal short circuit and fail. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 101, "Controls and Displays."
Chrysler (FCA US, LLC) (Stellantis) is recalling certain 2023-2024 Ram 1500, Jeep Wrangler, Jeep Wagoneer, Jeep Grand Wagoneer, Chrysler Pacifica, Ram 3500, Ram 3500 cab chassis, Ram 2500, Ram 4500 cab chassis, Ram 5500 cab chassis, 2023 Jeep Gladiator, Jeep Grand Cherokee, Jeep Grand Cherokee L, Ram 3500 Cab Chassis with a GVWR less than 10,000 lbs., and Chrysler Voyager vehicles. The steering column control module may not be welded properly, which can prevent the driver's air bag from deploying in a crash. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 208, "Occupant Crash Protection."
Chrysler (FCA US), LLC is recalling certain 2022-2023 Jeep Wrangler and Gladiator vehicles equipped with a manual transmission. The rearview camera may fail to display the rearview image and the reverse lights may not illuminate when the vehicle is placed in reverse. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard numbers 111, "Rear Visibility" and 108, "Lamps, Reflective Devices, and Associated Equipment."
Chrysler (FCA US, LLC) is recalling certain 2021-2023 Jeep Wrangler, Gladiator, and 2022-2023 Ram 1500 vehicles equipped with a 3.0L diesel engine. The high pressure fuel pump (HPFP) may fail.
Chrysler (FCA US, LLC) is recalling certain 2018-2023 Jeep Wrangler, and 2020-2023 Jeep Gladiator vehicles equipped with manual transmissions. The clutch pressure plate may overheat and fracture.
The vehicle does not have linerar acceperation. At times from a start, cold or warn engine, the vehicle will abruptly accelerate harder than the gas pedal was pressed. at light throttle, the vehicle will surge, shutter or chug. Erattic acceperation. after the engine replacement for a connecting rod bearing failure, the engine was running rough, poor mileage and stalled on a wet and cold morning (32degrees, raining). The stall happened on the deaccel lane of the interstate 25 (65 mph). THe dealership replaced one injector and said the problem was fixed. But it is not. Vehicle has not stalled, but we have not had the cold/wet weather.
No injuries · No fire · No crash
while completly filling the vehicle with gasoline, fuel sprays out of teh filler neck onto the vehicle and ground. This has happened many times, at reputible gas stations (Costco, Sams, walmart, Loaf and Jug). Dealership replaced original filler tube. But problem still exists. Shared video with dealership and they indicated they had no problems Castle Rock Jeep, Castle rock, COlorado
No injuries · No fire · No crash
Parking brake would not hold vehicle on hill. When the handle was released, a metalic clinking noise was heard. Castle rock jeep dealership said all was fine. Upon my inspection, I found the parking brake cable connection under teh center console was no longer connected. The cable was reconnected, and the cable was tightened to specifications indicated my Jeep. THe vehicle had 6200 miles on it. p.s. THis was after the warranty replacement of the engine. THe dealership indicated they tested several other jeeps and they all acted as mine. No concern for safety.
No injuries · No fire · No crash
5800 miles, the engine failed due to a connecting rod failure. Chrysler replaced the engine at no cost. Oil changes were done at the year mark as the mileage limit was not reached. Dealership indicates they replace several 3.6 engines a month for warranty failures Castle Rock Jeep, Castle rock Colorado.
No injuries · No fire · No crash
The contact owns a 2023 Jeep Gladiator. The contact received notification of NHTSA Campaign Number: 26V363000 (Steering); however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure.
No injuries · No fire · No crash