BMW of North America, LLC (BMW) is recalling certain 2011-2014 S 1000 RR/R/ HP4, R 1200 GS/GS Adventure/R/RT, K 1300 S, K 1600 GT/GTL/GTL Exclusive and 2014 R nine T motorcycles. The fuel pump, and auxiliary fuel pump in certain models, may crack and leak fuel during vehicle operation.
BMW of North America, LLC (BMW) is recalling certain Accessory Windscreens, sold for installation on various motorcycles. Specifically being recalled is Windscreen model number 8531917, sold for use on model year 2012-2018 F700GS motorcycles, Windscreen model number 8544629, sold for use on model year 2015-2018 R1200R motorcycles, Windscreen model number 8546224, sold for use on model year 2014-2018 S1000R motorcycles, Windscreen model number 8551929, sold for use on model year 2015-2018 S1000XR motorcycles, Windscreen model number 8554726, sold for use on model year 2013-2018 R1200GS motorcycles, Windscreen model number 8554727 sold for use on model year 2014-2018 R1200GS Adventure motorcycles, Windscreen model number 8556927, sold for use on model year 2015-2018 R1200RS motorcycles, Windscreen model number 8559548, sold for use on model year 2017-2018 R1200GS motorcycles and Windscreen model number 8561755, sold for use on model year 2012-2018 F800GS motorcycles. These windscreens have extra tinting on them that may reduce the rider's visibility. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 205, "Glazing Materials."
BMW of North America, LLC (BMW) is recalling certain accessory turn signals manufactured for 2006-2017 R1200GS, 2007-2008 and 2010-2017 R1200GS Adventure, 2017 F700GS and F800GS, 2013-2017 F800GT, 2015-2016 F800R, 2014-2017 F800GS Adventure, 2014-2016 S1000R, 2015-2017 R1200R, 2016-2017 R1200RS, and 2010-2017 S1000RR motorcycles. As designed, these accessory turn signals may be insufficiently visible to other drivers, and, as such, fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 108, "Lamps, Reflective Devices, and Associated Equipment."
BMW of North America, LLC (BMW) is recalling certain 2013-2017 F800R and F800GT motorcycles, 2014-2018 R1200GS and R1200GS Adventure motorcycles, 2016-2017 S1000XR motorcycles and 2015-2017 R1200R and R1200RS, 2008-2012 F650GS, 2008-2018 F800GS, and 2014-2017 F800GS Adventure motorcycles. When equipped with the optional aluminum luggage cases, the rear reflex reflectors may be partially blocked. The aluminum case mounts for the R1200GS and R1200GS Adventure may also partially block the reflectors. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 108, "Lamps, Reflective Devices, and Associated Equipment."
BMW of North America, LLC (BMW) is recalling certain 2014-2017 BMW R1200GS and BMW R1200GS Adventure motorcycles. The motorcycle fixed fork tube may separate from the pressed in seal plug that secures the tube to the upper triple clamp.
The contact owns a 2014 BMW R1200 GS Motorcycle. The contact stated that while operating the motorcycle, the odor of fuel was present. The cause of the failure was not yet determined. The local dealer was notified of the failure and informed the contact that the VIN was not included in NHTSA Campaign Number: 21V060000 (Fuel System, Gasoline). The contact stated that the motorcycle had experienced the failure listed in the recall. The failure mileage was 40,000.
No injuries · No fire · No crash
The contact owns a 2014 BMW R 1200 GS. The contact stated that while parked, the front suspension passenger side fork tube had separated. No warning light was illuminated. The vehicle had not been diagnosed or repaired by an independent mechanic or dealer. The manufacturer was made aware of the failure and determined that the VIN was not included in a recall. The contact referred to NHTSA Campaign Number: 17V438000 (Suspension). The failure mileage was approximately 41,800.
No injuries · No fire · No crash
The contact owned a 2014 BMW R 1200 GS. The contact stated while the contact's father was driving 25 MPH, the motorcycle unintendedly accelerated at high speed. The contact was unsure if any warning light illuminated, but it caused the contact's father to lose control of the motorcycle, and to avoid striking other vehicles, the contact struck a pole and a utility box. The contact's father stuffed severe injuries causing the contact's father to pass away. The contact’s father was wearing safety equipment. A police report was filed. The motorcycle was deemed a total loss by the insurance company. The manufacturer was contacted, and a case was filed. The failure mileage was unknown.
The contact owns a 2014 BMW R 1200 Motorcycle. The contact stated while driving at 60 MPH, the brake pedal was depressed and emitted abnormal sounds and failed to respond. There was no warning light illuminated. The contact continuously depressed the brake pedal until it responded. The contact was able to drive to his residence, where he noticed that the front forks were leaking oil onto the wheel and onto the brakes. The dealer was notified of the failure and an appointment was scheduled for diagnostic test. The vehicle was not diagnosed or repaired. The manufacturer was notified of the failure and a case was opened. The failure mileage was approximately 30,400.
No injuries · No fire · No crash
Rear drive shaft universal joint failed causing the motorcycle to lose power to the rear wheel. If I had been in a turn when the motorcycle lost power, I could have lost control of the vehicle, and my passenger and myself may have crashed and been harmed or died. Per BMW: There have been a mounting number of instances where condensation within the hollow swingarm unit has caused corrosion to accumulate on the drive shaft and/o rear u-joint, creating issues that can include loss of power to the rear wheel. BMW has now a Service Action SA 0033130000, to correct the condensation. No inspection other than by me mechanic. No warning lamps or messages prior to the failure. Symptoms prior to the failure were a strange vibrating sensation and hum emitting from the rear of the bike. This began 2 days prior to the joint failure. I believe condensation in the swing arm caused the corrosion that led to the failure of the drive shaft rear universal joint.
No injuries · No fire · No crash