Toyota Recalls 2022-2023, 2025-2026 Tundra for Camshaft Defect

Toyota has initiated a safety recall for approximately 62,000 non-hybrid Tundra pickup trucks across the 2022-2023 and 2025-2026 model years in the U.S. This action addresses a manufacturing defect in certain engine camshafts that could potentially cause a sudden loss of motive power, elevating the risk of a crash.

Potential Engine Camshaft Failure

The recall centers on specific engine camshafts that were improperly manufactured. These components, originating from a single production lot and supplier, have the potential to snap while the vehicle is in operation. Toyota estimates that around 300 of these potentially faulty camshafts may have been installed in the affected Tundra vehicles.

A fractured camshaft can lead directly to a loss of engine power, particularly when driving at higher speeds. Such an unexpected power loss significantly increases the likelihood of a vehicle crash, posing a safety risk to occupants and other road users. This defect is a critical concern for the performance and safety of the affected trucks.

Identifying Affected Tundra Models

The safety recall specifically targets non-hybrid Toyota Tundra models produced during the 2022-2023 and 2025-2026 model years. Owners of these vehicles should be aware that their truck might be equipped with a camshaft from the identified defective batch. Toyota will begin notifying all known owners of the subject vehicles by mid-January 2027.

To determine if a specific vehicle is part of this Toyota Tundra camshaft recall, owners can visit Toyota's official recall website at Toyota.com/recall or the National Highway Traffic Safety Administration (NHTSA) website at nhtsa.gov/recalls. Entering the vehicle's 17-digit Vehicle Identification Number (VIN) or license plate information on either site will confirm its recall status. This online check is the most immediate way to verify if a Tundra is affected.

The Recall Remedy and Owner Actions

Once notified, owners are instructed to bring their affected Toyota Tundra to an authorized Toyota dealership. Dealership technicians will perform an inspection to ascertain if the installed camshaft belongs to the specific production lot identified as defective. If the camshaft is found to be from the affected lot, it will be replaced.

Toyota has confirmed that all necessary inspections and camshaft replacements will be carried out at no charge to the vehicle owner. This free repair ensures that owners are not financially burdened by the manufacturing defect. For any additional questions or concerns regarding the Toyota Tundra camshaft recall, Toyota customer support is available by calling the Toyota Brand Engagement Center at 1-800-331-4331.

Owners of the specified Toyota Tundra models are strongly encouraged to act promptly upon receiving their recall notification. Addressing this camshaft issue is crucial for maintaining the safety and reliability of their vehicle, preventing potential loss of power, and mitigating crash risks.