2024 Jeep Wrangler RFHM Update for Key Fob Security
Jeep has released Technical Service Bulletin (TSB) 08-151-25 for the 2024 Jeep Wrangler to update the Radio Frequency Hub Module (RFHM) software. This update enhances vehicle security by preventing unauthorized key fob programming.
Jeep has issued Technical Service Bulletin (TSB) 08-151-25 to provide an important software update for the Radio Frequency Hub Module (RFHM) in the 2024 Jeep Wrangler. This update is designed to enhance vehicle security and prevent potential theft by addressing vulnerabilities related to key fob programming.
The 2024 Jeep Wrangler RFHM update aims to deter unauthorized access and ensure that only legitimate key fobs can be programmed to the vehicle, safeguarding against unwanted drive-offs.
Symptoms
Owners of the 2024 Jeep Wrangler may experience concerns related to vehicle security. The primary symptom addressed by this TSB is the potential for unauthorized key fobs to be programmed through the Radio Frequency Hub Module (RFHM). This could lead to worries about vehicle theft.
Cause
The root cause of this concern is identified as the existing RFHM software. The software, prior to this update, had a vulnerability that could potentially allow unauthorized programming of key fobs, posing a security risk to the vehicle.
Repair Procedure Summary
The repair for this issue involves updating the RFHM module with the latest available software. Technicians will use a diagnostic tool, such as wiTECH, to perform the reprogramming. The process includes:
- Connecting a battery charger to the vehicle to maintain stable voltage during the flash process.
- Reprogramming the RFHM with the most current software version.
- Clearing any Diagnostic Trouble Codes (DTCs) that may have been set in any module due to the reprogramming.
This 2024 Jeep Wrangler RFHM update is a critical step to ensure enhanced vehicle security.
Important Warnings
When performing the RFHM software update, technicians must adhere to specific voltage requirements to prevent issues:
- NOTE: Install a battery charger to ensure battery voltage does not drop below 13.2 volts. Do not allow the charging voltage to climb above 13.5 volts during the flash process.
- NOTE: If this flash process is interrupted/aborted, the flash should be restarted.
Required Tools or Parts
To perform this software update, technicians will require the following:
- wiTECH or Equivalent: A compatible diagnostic scan tool is necessary to access and reprogram the RFHM module.
Owner Action
If you own a 2024 Jeep Wrangler and are concerned about key fob security or wish to ensure your vehicle has the latest security enhancements, you should schedule an appointment with an authorized Jeep dealer. The dealer will perform the necessary software update for the Radio Frequency Hub Module (RFHM).
This service, identified by Labor Operation Number 18-19-12-BB and Failure Code CC, is reimbursable under the provisions of your vehicle's warranty. The estimated labor time for this procedure is 0.3 hours.
Source: NHTSA ID: 11018256
Frequently Asked Questions
- What is TSB 08-151-25 about for the 2024 Jeep Wrangler?
- TSB 08-151-25 addresses a security concern in the 2024 Jeep Wrangler related to the Radio Frequency Hub Module (RFHM) software, which could potentially allow unauthorized key fob programming.
- What is the purpose of the 2024 Jeep Wrangler RFHM update?
- The purpose of the RFHM software update is to enhance vehicle security by preventing hackers or unauthorized individuals from programming their own key fobs to your vehicle, thereby deterring theft.
- Will I be charged for this RFHM software update?
- No, this software update for the Radio Frequency Hub Module (RFHM) is reimbursable under warranty provisions. You should not be charged for this service at an authorized Jeep dealer.
- What should I do if I'm concerned about my 2024 Jeep Wrangler's key fob security?
- If you own a 2024 Jeep Wrangler and are concerned about key fob security, you should contact your authorized Jeep dealer to schedule the TSB 08-151-25 software update for your vehicle's RFHM.
What Jeep Wrangler owners report
Counted from the records in our database across 41 model years.
- 18,838
- Owner complaints
- 104
- Recalls
- 2,758
- Service bulletins
- 572
- Crashes reported
- 552
- Fires reported
- 435
- Injuries reported
The 2024 model year
970 complaints, the 4th most of 41 model years on file. Owners reported 14 crashes, 13 fires and 7 injuries for this year, which also has 14 recalls on file.
Electrical System, the system this article covers, accounts for 3,613 of 18,838 complaints (19%), including 568 for 2024.
Complaints by model year
| 2006 | 730 | |
|---|---|---|
| 2007 | 1,750 | |
| 2008 | 1,904 | |
| 2010 | 686 | |
| 2012 | 836 | |
| 2014 | 658 | |
| 2018 | 1,827 | |
| 2019 | 747 | |
| 2021 | 963 | |
| 2024 | 970 |
Most-reported systems
- Steering — 3,929
- Electrical System — 3,613
- Power Train — 2,470
- Engine — 2,406
- Fuel System — 2,015
Latest recalls for the 2024 model year
- 26V363000 — Steering (Jun 2026) — Park outside
- 26V327000 — Back Over Prevention (May 2026)
- 25V766000 — Engine (Nov 2025)
Recent owner reports about electrical system
Since the 68C Recall software update was performed on my Jeep, the vehicle has experienced recurring, unexpected losses of motive power while driving in Electric Mode. During these events, pressing the accelerator yields no response.
Read owner complaints →The contact owns a 2024 Jeep Wrangler. The contact received notification of NHTSA Campaign Number: 25V710000 (ELECTRICAL SYSTEM); however, the part to do the recall repair was unavailable.
Complaints are owner reports filed with NHTSA. They are unverified, and counts depend on how many vehicles were sold, so they are not a failure rate.
Related Articles
What's Going Wrong with the 2024 Jeep Wrangler: Recalls & Bulletins
The 2024 Jeep Wrangler has been subject to four safety recalls, primarily concerning lighting systems and the driver's airbag. Owners should also be aware of several manufacturer service bulletins addressing issues like engine performance, heated steering wheel malfunctions, and rear axle oil…
2024-2027 Jeep Wrangler A/C Not Working Issue (9100935)
For 2024-2027 Jeep Wrangler owners experiencing A/C issues like hot air or a non-operating A/C relay clutch, manufacturer communication 9100935 outlines a simple fix: a battery disconnection to reset the PCM, warning against unnecessary Power Distribution Center (PDC) replacements.
2024 Jeep Wrangler 4WD System Warning & DTC C147B-92 TSB
Jeep has issued TSB 08-355-26 for certain 2024 Wrangler models to address issues with the 4WD system, including warning lights, MIL illumination, and DTC C147B-92. The fix involves a software update to the Drivetrain Control Module (DTCM).
2024-2026 Jeep, Ram, Dodge Cylinder Head Bolt Inspection
Mopar has issued a Quality Inspection Request (QIR) concerning cylinder head cover bolts, part number 04893799AJ, for various 2024-2026 Jeep, Ram, and Dodge models. Dealers are instructed to identify and quarantine suspect bolts with a chamfered flange.
2024 Jeep Wrangler PCM Update for Misfire & O2 Sensor DTCs
A Technical Service Bulletin (TSB 18-003-26 REV. A) has been issued for the 2024 Jeep Wrangler to address various engine performance issues, including misfires, rough idle, and O2 sensor fault codes. This update involves reprogramming the Powertrain Control Module (PCM).
Leave a comment
Comments are moderated and may take a moment to appear. Only your first name and the initial of your last name are shown publicly.
Comments
Be the first to comment.