2025 Jeep Compass Incorrect Spare Tire Assembly TSB

Stellantis has released Technical Service Bulletin (TSB) 22-001-25, also known as Rapid Service Update (RSU) 25-151, to address an issue with an incorrect spare tire assembly in certain 2025 Jeep Compass vehicles. This bulletin, dated July 26, 2025, provides technicians with instructions for identifying and resolving the problem.

It is important to note that this specific bulletin primarily applies to the South America market, as indicated in the document. However, owners of 2025 Jeep Compass vehicles equipped with 225/60R17 BSW All-Season Tires (Sales Code TTE) and a Full Size Spare Tire (Sales Code TBB) may find this information relevant if they experience symptoms related to an incorrect spare tire assembly.

Symptoms

Technicians may identify the problem as "An incorrect spare tire rim or non-compliant spare tire rim assembly." This indicates that the spare wheel or its components do not meet the required specifications.

Cause of the Issue

The root cause of this issue is a "Non-compliant spare tire rim assembly." This means the spare tire rim installed in affected vehicles does not conform to manufacturing standards.

Diagnosis

To determine if a vehicle is affected, technicians will first check the VIN against the RSU VIN list or use the Vehicle Information Plus (VIP) system. If the vehicle's VIN is listed, the repair procedure should be performed. Even if a vehicle is not on the VIN list but exhibits the symptom of an incorrect spare tire assembly, the repair procedure should still be followed.

The diagnostic process involves a visual inspection of the spare tire aluminum rim. The correct spare tire aluminum rim should not have windows or cut-outs in the middle of each spoke. Additionally, the correct tire size for the spare should be "225/60R17". Technicians will compare the installed rim to visual references (like Fig. 1 and Fig. 2 in the original document) to confirm if an incorrect spare tire assembly is present.

Repair Procedure Summary

The repair process for the 2025 Jeep Compass incorrect spare tire involves two main steps:

1. Inspection: The technician will inspect the spare tire aluminum rim to verify if it is the correct type. This inspection is covered under Labor Operation No. 22-40-01-9J and takes approximately 0.2 hours.
2. Replacement (if necessary): If the inspection reveals an incorrect spare tire assembly, the aluminum spare tire rim and tire will be replaced. This replacement procedure is covered under Labor Operation No. 22-40-01-9K and has an estimated labor time of 0.3 hours. The failure code associated with this repair is ZY.

Required Parts

If a replacement is necessary for the 2025 Jeep Compass incorrect spare tire, the following parts may be required:

• Wheel, Aluminum: Part No. 7098436 - EMEA or 68751156AA - Mopar. New aluminum rims are not shipped with tires.
• Tire - PNEU 225/60 R17 103H: Part No. 7094256 - EMEA. Tires will need to be purchased locally and then submitted for reimbursement.

Important Information for Technicians

After applying TSB 22-001-25, it is explicitly stated that it is not necessary to send DID-I or DID-A. This streamlines the administrative process for technicians completing the repair.

Warranty Information

All repairs performed under TSB 22-001-25 are reimbursable within the provisions of the vehicle's warranty.

NHTSA ID: 11021032