2023-2024 BMW X5/X7/X6 Cracking Steering Noise TSB
BMW has released Service Information Bulletin SIB 32 01 23 to address cracking, creaking, or knocking noises from the front axle/steering system in certain 2023-2024 BMW models. The issue is caused by high breakaway torque in the tie rod's thrust bearing, requiring tie rod assembly replacement.

Si applica anche a
- BMW 230i
- 2023–2024
- BMW 330i
- 2023–2024
- BMW 430i
- 2023–2024
- BMW X5
- 2023
- BMW X6
- 2023–2024
- BMW X7
- 2023–2024
- BMW XM
- 2023–2024
- BMW Z4
- 2023
▸ Mostra altri 2▾ Mostra meno
Symptoms
Owners of affected 2023-2024 BMW models may experience distinct noises from the front axle or steering system. The primary symptoms include "cracking, creaking, or knocking noises" heard when turning the steering wheel while the vehicle is stationary or when driving on uneven road surfaces. If you notice a "BMW X5 cracking steering noise" or similar sounds, your vehicle may be affected.
Cause
The root cause of the noises is identified as excessive breakaway torque in the thrust bearing of the tie rod. This condition leads to the unpleasant sounds during steering input or when the suspension is articulating over uneven terrain.
Important Warnings
BMW has issued specific instructions regarding this issue:
- "Do not replace any parts until further notice for the following vehicles: G20, G22, G23, G26, G29, G42, G80, G82, G83 and G87."
- "Use of the current tie rod part numbers will not provide a remedy to the issue and is not permitted."
- "It is not necessary to replace the EPS for any of the listed affected models."
Defect Code
This issue is associated with the defect code 3221043900, described as "Track rod, side (incl. ball joint) Unpleasant noises."
Repair Procedure Summary
To resolve the cracking, creaking, or knocking noises, technicians will follow a specific procedure outlined in Service Information Bulletin SIB 32 01 23:
- Verify EPS Type: The first step is to confirm that the vehicle is equipped with a ThyssenKrupp Presta Steering (TKPS) EPS system using ISTA control unit functions.
- Tie Rod Replacement: If a TKPS EPS is confirmed, one or both tie rod assemblies will be replaced as per BMW repair instructions (REP 32 21 231). For G20 vehicles produced up to April 2019, both tie rods (left and right) must always be replaced.
- Wheel Alignment: After tie rod replacement, a wheel alignment check must be performed with ride height measurement, without loading the vehicle, according to REP 32 00 155.
This repair directly addresses the "BMW X5 cracking steering noise" by replacing the faulty tie rod components.
Parts Information
Specific part numbers for the left and right tie rods must be obtained through ETK or AIR by entering the vehicle's chassis number. This ensures the correct parts are ordered based on the vehicle's equipment and options. Additional small parts, such as one-time use screws, nuts, and seals, must also be replaced according to ISTA repair instructions and the Electronic Parts Catalog.
Claim Information
This repair is covered under the terms of the BMW New Vehicle Limited Warranty for Passenger Cars and Light Trucks. Dealers should refer to the following labor operations for claiming purposes:
- Diagnosis: 32 99 000 (Verifying the noise) or 00 58 500 (Diagnosis Worktime Flat Rate)
- Verifying TKPS EPS: 00 00 006 (Carrying out vehicle test - Main work) or 00 00 556 (Carrying out vehicle test - Plus work)
- Replacing One Side: 32 21 231 (Replacing left or right tie rod - Main work) or 32 21 734 (Plusposition)
- Replacing Both Sides: 32 21 251 (Replacing tie rods left and right - Main work) or 32 21 737 (Plusposition)
- Wheel Alignment/Toe-In: 32 00 595 (Kinematics Diagnosis System wheel alignment), 32 00 601 (Adjusting toe-in on front axle), 32 13 905 (Commissioning of electromechanical steering gear), and optionally 32 00 650 (Additional work for integral active steering).
Source: NHTSA ID: 11009555
Frequently Asked Questions
- What kind of noises indicate a problem with my BMW's steering?
- You might hear "cracking, creaking, or knocking noises" when turning the steering wheel while stationary or driving on uneven roads. These sounds suggest an issue with the front axle/steering system.
- What is the cause of the cracking steering noise in my BMW?
- According to BMW Service Information Bulletin SIB 32 01 23, the noise is caused by excessive breakaway torque in the thrust bearing of the tie rod, which requires replacement of the tie rod assembly.
- Is the Electric Power Steering (EPS) unit replaced to fix this issue?
- No, BMW explicitly states in SIB 32 01 23 that "It is not necessary to replace the EPS for any of the listed affected models." The repair focuses on replacing the tie rod assemblies, not the EPS unit itself.
- What is the defect code associated with this steering noise problem?
- The defect code linked to this issue is 3221043900, which BMW describes as "Track rod, side (incl. ball joint) Unpleasant noises."
- Will this repair be covered under warranty?
- Yes, the repair for this issue, as outlined in Service Information Bulletin SIB 32 01 23, is covered under the terms of the BMW New Vehicle Limited Warranty for Passenger Cars and Light Trucks.
Related Articles
2024-2025 BMW Taillamp Check Control Message TSB
BMW has released Service Information Bulletin SIB 63 07 25 to address an intermittent "CHECK CONTROL MESSAGE (CCM) PRESENT FOR THE TAILLAMPS" warning in certain 2024-2025 BMW X5 and 230i vehicles. This issue is caused by a software error and can be resolved with a software update.
2024 BMW X5/X7 Instrument Panel Depression SIB 51 04 26
BMW SIB 51 04 26 addresses a slight depression on the top passenger side of the instrument panel in 2024 BMW X5 and X7 vehicles. This bulletin clarifies that the outline is a normal characteristic from the passenger side airbag and does not require any parts replacement.
2024 BMW X Series Front Axle Rattling Noise SIB 31 03 26
BMW has issued Service Information Bulletin (SIB) 31 03 26 to address a rattling noise from the front axle in 2024 BMW X5, X6, and X7 models. This noise, typically heard at slow speeds over rough surfaces, is caused by premature aging and cracking of the tension strut hydro-mount elastomer…
2024 BMW X5 X3 330i KLE Control Unit Return TEC844
BMW has issued Parts Bulletin C32-0226-0620, also known as TEC844, concerning the inspection and return of specific KLE control units (part number 61 44 5 A60 2F9) for 2024 BMW X5, X3, and 330i vehicles. The issue involves missing 'MHD' labels on the component and BMW parts labels.
2024 BMW X-Series ACSM Sensor Service Action
BMW has issued a Service Action Notification-Reminder 22 Jan 2026 regarding potentially faulty Active Crash Safety Module (ACSM) sensors in certain 2024 X-Series vehicles. This issue can lead to deactivation of safety functions and restricted driving dynamics. Owners are advised to contact an…
Leave a comment
Comments are moderated and may take a moment to appear. Only your first name and the initial of your last name are shown publicly.
Comments
Be the first to comment.