Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain model year 2008-2014 FJ Cruiser and Tacoma vehicles equipped with accessory wheels and tires installed by Toyota or dealers prior to the vehicle's first sale. The affected vehicles may list incorrect spare tire size and/or cold tire inflation information on the tire placard. As such, these vehicles fail to comply with Federal Motor Vehicle Safety Standard No. 110, "Tire Selection and Rims for Passenger Cars."
Toyota Motor Corporation (Toyota) is recalling certain model year 2007-2013 FJ Cruiser vehicles manufactured January 25, 2006 through February 23, 2013 and equipped with a Toyota Auxiliary Driving Lamp Kits mounted to the front bumper. These lamp assemblies include 55 watt bulbs and due to this wattage and mounting angle, the combination of the upper beam headlamps plus the auxiliary lamps are too bright and exceed the maximum light output allowed for an upper beam headlamp. Therefore, these vehicles fail to conform to Federal Motor Vehicle Safety Standard No. 108, "Lamps, reflective devices, and associated equipment."
Southeast Toyota is recalling certain model year 2008 and 2010-2013 Toyota Tundra, 2010-2012 Rav4, 2012 Toyota Sequoia, 2010-2011 Toyota Corolla, 2010-2011 Toyota Camry and Camry Hybrid, 2010-2013 Toyota Highlander and Highlander Hybrid, 2010-2013 Toyota FJ Cruiser, 2011 Toyota Land Cruiser, 2010-2013 Toyota Venza, 2010-2011 Toyota 4Runner, 2010-2013 Toyota Tacoma, 2011-2012 Toyota Sienna, 2012 Toyota Prius, 2013 Scion FR-S, 2011 Scion XD, 2011 Scion XB, and 2012 Scion TC vehicles. These vehicles were sold with labels that were outside the allowable one percent of accuracy of actual weight added. Thus, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) Number 110, "Tire Selection and Rims."
Toyota is recalling certain model year 2007 through 2013 FJ Cruiser passenger vehicles. The retractors for the front driver and passenger seat belts are mounted in the access door (rear door) panels of the vehicle. Due to insufficient strength of the access door panel, cracks may develop in the panel if the access door is repeatedly and forcefully closed over an extended period of time.
Toyota is recalling certain Toyota Racing Development (TRD) brake kits, P/N PTR09-35070, and TRD High-Performance brake kits, P/N PTR09-35100, installed by Toyota vehicle processing centers and sold by Toyota dealers as an optional accessory for model year 2007 through 2012 Toyota FJ Cruiser vehicles. The subject TRD brake kit is specifically designed for the front wheels of 2007-2012 model year FJ Cruiser vehicles. Due to the shape of the outer brake tube of the brake kit, the clearance between the outer brake tube and a TRD 16 inch 6-spoke alloy wheel is minimal. If wheel balance weights are installed in an incorrect location, there is a possibility that the outer brake tube could be damaged due to interference with the balance weight, and brake fluid could leak from the damaged tube.
The vehicle within less than 15 years had structural creams rust that had compromised the safety of my vehicle and it is rotting out with holes, the fuel tank is rusted and lose, and may fall, repairs are expensive and it is my only car. They’re all also rust holes right through the body and floor in multiple locations.
No injuries · No fire · No crash
My frame is corroding at a rapid rate and needs to be addressed by Toyota! I truly believe that this was cheap way of selling cars without the proper undercoating affecting these trucks later on most Toyota trucks had the frames replaced buy the dealers with the same problems that these fj cruisers have, this needs to be addressed asap.
No injuries · No fire · No crash
Rust damage to frame
No injuries · No fire · No crash
Frame rust through.
No injuries · No fire · No crash
No dealer is willing to fix recalls.
No injuries · No fire · No crash