Chrysler (FCA US, LLC) is recalling certain 2021-2022 Ram 1500, Ram 2500, Ram 3500, Ram 4500, and Ram 5500 vehicles. The steering column control module may cause the driver's side air bag not to deploy as intended. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 208, "Occupant Crash Protection."
Chrysler (FCA US, LLC) is recalling certain 2021-2023 Ram 2500, 3500, 3500 Cab Chassis, and 4500, 5500 Cab Chassis vehicles equipped with a Cummins 6.7L Turbo Diesel engine. An electrical short may occur in the heater grid relay with the ignition on or off.
Chrysler (FCA US, LLC) is recalling certain 2019-2022 Ram 1500, 2500, and 3500 pickup trucks. The tailgate may not latch properly due to misaligned tailgate strikers, which could result in the tailgate opening while driving.
FCA US, LLC (Chrysler) is recalling certain 2020-2023 Ram 2500 and 2020-2022 Ram 3500 vehicles. A build-up of pressure and heat inside the transmission may result in a transmission fluid leak from the dipstick tube.
Chrysler (FCA US, LLC) is recalling certain 2019-2022 Ram 2500 and 2021-2022 Dodge Durango vehicles, and 2019-2022 3500 cab chassis with GVWR less than 10,000 lbs. The ABS control module software may prevent the electronic stability control (ESC) malfunction indicator light from illuminating during certain conditions. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 126, "Electronic Stability Control Systems."
The contact owns a 2021 Ram Promaster 2500. The contact received notification of NHTSA Campaign Number: 25V552000 (Back Over Prevention); however, the part to do the recall repair was not yet available. The contact stated that while reversing, the rear-view camera was inoperable. The dealer was contacted and informed the contact that only three parts could be ordered monthly, and the contact was placed on a waiting list. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The failure mileage was approximately 70,000.
No injuries · No fire · No crash
ABS/Forward Collision/Traction Control/4WD/Cruise Control warning lights on. Braking is inconsistent. Sometimes hard to brake, sometimes brake pedal is real spongy and will go almost to floor.
No injuries · No fire · No crash
I am writing to formally follow up regarding complaint/case number 97989810 through Dodge and to request that this matter be elevated for a complete technical review concerning my 2021 Ram 2500 6.7L Cummins, VIN [XXX]. Time - Line PRIOR FACTORY-WARRANTY REPAIR The XXX factory-warranty repair is an important part of this vehicle's mechanical history. That repair involved the timing-cover/timing-gear-case area and front crankshaft seal. As part of that repair, the harmonic balancer/vibration damper was removed and reinstalled. Approximately 26,000 miles later, the vehicle experienced a failure involving the vibration damper and its associated mounting bolts. +++ Vehicle receipt will be attached XXX took vehicle Naples Dodge after large thump and vehicle would not move Per dealership - Finding - Advise it was an after market tune that caused harmonic balancer got loose and sheered the bolts Ongoing the dealership provided video and several reports that it was an after market tune no coralation between the 2024 service and findings today Findings: Cummins Service Technician XXX technician report In XXX Cummins filed a safety recall with the NHTSA (Campaign ID 24V-192) concerning certain engines equipped with vibration dampers are the critical details of the recall:The Issue: The front vibration damper capscrews (mounting bolts) were not torqued to specification during assembly. If left unaddressed, the capscrews could fracture or loosen, potentially causing the vibration damper to separate from the engine. This creates a high risk of personal injury, mechanical failure, or property damage.(Note: If you are looking for Dodge Ram trucks, Cummins also issued a Technical Service Bulletin—TSB210097—addressing fluid degradation and capscrew fractures on viscous vibration dampers for B6.7 engines, though it was handled as a service bulletin rather than a sweeping automotive safety recall). Direct coralation of what occure INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
No injuries · No fire · No crash
There is a known issue with the Ram Power Wagon locking differential system where the electronic locking differential wiring harness will fault one of three ways. The first being that the wiring harness is two short so when the rear axle articulates there isn't enough slack therefore causing the plug in the diff housing to fail. The second is that sensor inside the housing faults due to gear oil build up on the sensor. Finally the third if the locker wiring inside the housing wears out causes the locker to fault. Any of these three issues causes a "Service Axle Locker System" and prevents the front and rear lockers to be used indefinitely. This can cause the truck to become stuck during off pavement driving.
No injuries · No fire · No crash
The contact owns a 2021 Ram ProMaster 2500. The contact received notifications of NHTSA Campaign Numbers: 25V552000 (Back Over Prevention) and 25V720000 (Engine and Engine Cooling); however, the parts to do the recall repairs were unavailable. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The vehicle was taken to the dealer, and the contact was informed that the repair might take 2 or 3 days to be completed. The dealer was only able to pay for a rental vehicle for two days. The contact stated that 5 days later, the dealer was still waiting on parts from the manufacturer to repair the vehicle. The vehicle was not repaired. The manufacturer was not made aware of the failure. The contact had not experienced a failure.
No injuries · No fire · No crash