Nissan Rogue Service Bulletins (2019)
170 manufacturer communications on file.
- January 17, 2019•Document ID: 10153011Service Bulletin/Repair InstructionsFUEL SYSTEM, GASOLINE
- Mfr Comm. #:
- P8337 2019 Rogue
- Date Added:
- February 19, 2019
- Manufacturer:
- NISSAN
SummaryFuel Tank Band Bolt Dealer Inventory *****Dealer Announcement***** Nissan is conducting a quality action to torque the front fuel tank band bolts to specification on 12 specific 2019 Rogue Sport (J11) vehicles identified in Service Comm. Affected vehicles are not subject to stop sale and are either currently in dealer inventory or assigned and in transit to the dealer. Nissan requests dealers to complete this repair prior to sale to ensure customer satisfaction. *****What Dealers Should Do***** PLEASE FOLLOW THE ATTACHED REPAIR INSTRUCTIONS: 1. Verify if vehicles are affected by this quality action using Service Comm or DBS National Service History ? Open Campaigns I.D. P8337. - New vehicles in dealer inventory can also be identified using DBS (Sales-> Vehicle Inventory, and filter by Open Campaign). - Refer to NPSB 15-460 for additional information - Please continue to check newly arriving inventory for campaign applicability. 2. Dealers should use the attached procedure to remedy any vehicle affected by this quality action. 3. The service department should submit the applicable warranty claim for the action performed so it can be closed on Service Comm and release the vehicle. ***** Dealer Responsibility ***** It is the dealer?s responsibility to check Service Comm or DBS National Service History ? Open Campaign using the appropriate campaign I.D for the campaign status on each affected vehicle currently in new vehicle inventory.
Associated Products (1)Associated Documents - January 11, 2019•Document ID: 10152886Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- NTB19-001
- Date Added:
- February 19, 2019
- Manufacturer:
- NISSAN
SummaryCHASSIS CONTROL MODULE DTC INFORMATION SERVICE INFORMATION If one or more of the following Chassis Control DTCs are stored: - C1BA0-00 ? (CHASSIS CONTROL BRAKE SYSTEM) - C1B92-00 ? (BRAKE CONTROL SYSTEM) - C1B93-00 ? (ENGINE/HEV SYSTEM) - C1B94-00 ? (TRANSMISSION SYSTEM) And One or more additional DTCs, other than those above, are also stored in a control unit other than the Chassis Control Module. - Perform the diagnostic/repair procedures for the additional DTCs of the other control unit FIRST. - Refer to the Electronic Service Manual (ESM) for DTC specific diagnostic information. Do not replace the CHASSIS CONTROL MODULE (CONTROLLER ASSY-IDM) if additional DTCs are present.
Associated Products (6)Associated Documents - December 7, 2018•Document ID: 10152982Service Bulletin/Repair InstructionsSUSPENSION
- Mfr Comm. #:
- NTB18-083
- Date Added:
- February 19, 2019
- Manufacturer:
- NISSAN
Summary2014 - 2019 ROGUE; SQUEAK/CREAK NOISE FROM FRONT SUSPENSION BOUND BUMPER DRIVING OVER BUMPS IF YOU CONFIRM Using the flow chart on page 2, a squeak/creak noise is heard coming from the left or right front suspension bound bumper when driving over speed bumps or similar road surfaces. NOTE: This squeak/creak noise, if it should occur, is more noticeable in cold weather. ACTION Replace the front suspension bound bumper, only on the side that is making noise. - Refer to the appropriate Electronic Service Manual (ESM) for replacement information. SUSPENSION > FRONT SUSPENSION > REMOVAL AND INSTALLATION > FRONT COIL SPRING AND STRUT > Removal and Installation. - Pages 4 - 6 in this bulletin contain helpful information to perform this procedure. - Make sure to replace the one-time-use nuts listed in the PARTS INFORMATION. - Check the front wheel alignment; adjust to factory specifications as needed. NOTE: DO NOT apply lubricant to the bound bumper to resolve this issue.
Associated Products (6)Associated Documents - November 28, 2018•Document ID: 10152013Service Bulletin/Repair InstructionsVEHICLE SPEED CONTROL:ACCELERATOR PEDAL
- Mfr Comm. #:
- NTB18-033a
- Date Added:
- December 17, 2018
- Manufacturer:
- NISSAN
Summary2014 ? 2019 ROGUE; ACCELERATOR PEDAL VIBRATION This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
Associated Products (6)Associated Documents - November 12, 2018•Document ID: 10152012Service Bulletin/Repair InstructionsELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL; FUEL SYSTEM, GASOLINE
- Mfr Comm. #:
- NTB17-057b
- Date Added:
- December 17, 2018
- Manufacturer:
- NISSAN
Summary2015-2019 ROGUE AND 2017-2019 ROGUE SPORT; DISTANCE TO EMPTY DOES NOT RESET This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
Associated Products (5)Associated Documents - November 8, 2018•Document ID: 10152510Service Bulletin/Repair InstructionsEQUIPMENT; POWER TRAIN
- Mfr Comm. #:
- NTB12-103f
- Date Added:
- January 7, 2019
- Manufacturer:
- NISSAN
SummaryCVT / TCM CALIBRATION DATA ?WRITE? PROCEDURE This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
Associated Products (41)2019 Nissan Altima2019 Nissan NV2002019 Nissan Pathfinder2019 Nissan Rogue2019 Nissan Sentra2018 Nissan Altima2018 Nissan Maxima2018 Nissan Murano2018 Nissan Pathfinder2018 Nissan Rogue2018 Nissan Sentra2017 Nissan Altima2017 Nissan Juke2017 Nissan Maxima2017 Nissan Murano2017 Nissan NV2002017 Nissan Pathfinder2017 Nissan Quest2017 Nissan Rogue2017 Nissan Sentra+ 21 moreAssociated Documents - October 22, 2018•Document ID: 10149042Service Bulletin/Repair InstructionsSTRUCTURE:BODY:DOOR; EQUIPMENT:ELECTRICAL:ANTI-THEFT DEVICES; ELECTRICAL SYSTEM:IGNITION:ANTI-THEFT:CONTROL MODULE
- Mfr Comm. #:
- NTB18-071
- Date Added:
- November 26, 2018
- Manufacturer:
- NISSAN
SummarySECURITY ALARM SOUNDS AFTER USING MECHANICAL KEY TO UNLOCK DRIVER DOOR SERVICE INFORMATION Applied Vehicles listed above are no longer equipped with a door unlock sensor and/or Body Control Module (BCM) software to provide support for the door unlock sensor. Normal Functionality For Vehicles Built Without Door Unlock Sensor And/Or BCM Software To Support Door Unlock Sensor For Applied Vehicles built after the Applied Dates listed on page 1, using the mechanical key on the driver door will operate differently than vehicles built before the Applied Dates. For these later models, the BCM will not recognize operation of the mechanical key. If a mechanical key is used to lock the driver door: - The security system will not set. If the vehicle is broken into, the alarm will not sound. - Only the driver door will be locked. Other doors will not lock using the mechanical key. If a mechanical key is used to unlock the driver door: - Only the driver door will be unlocked. Other doors will not be unlocked. - If the security system is set, when the door is opened the alarm will sound. NOTE: Using the Unlock button on the Intelligent Key, pushing the request switch on the driver or passenger door with the Intelligent Key in range, or using the Intelligent Key to start the vehicle will silence the alarm. The mechanical key will not operate the power windows.
Associated Products (11)Associated Documents - October 9, 2018•Document ID: 10149812Service Bulletin/Repair InstructionsELECTRICAL SYSTEM:12V/24V/48V BATTERY
- Mfr Comm. #:
- NTB15-077b
- Date Added:
- December 3, 2018
- Manufacturer:
- NISSAN
SummaryNISSAN; SIGNAL TECH-II INTELLIGENT KEY BATTERY TEST AND SIGNAL CHECK This bulletin has been amended. See Amendment History on the last page. Please discard previous versions of this bulletin.
Associated Products (49)2019 Nissan Altima2019 Nissan Pathfinder2019 Nissan Rogue2019 Nissan Sentra2019 Nissan Titan2019 Nissan Versa2019 Nissan Versa Note2018 Nissan Altima2018 Nissan Armada2018 Nissan Leaf2018 Nissan Maxima2018 Nissan Murano2018 Nissan Pathfinder2018 Nissan Rogue2018 Nissan Sentra2018 Nissan Titan2018 Nissan Versa2018 Nissan Versa Note2017 Nissan Altima2017 Nissan Leaf+ 29 moreAssociated Documents - April 20, 2018•Document ID: 10138264Service Bulletin/Repair InstructionsEXTERIOR LIGHTING:FOG LIGHTS; EQUIPMENT
- Mfr Comm. #:
- NTB03-074m
- Date Added:
- May 21, 2018
- Manufacturer:
- NISSAN
SummaryFOG LAMP AND/OR HEADLAMP FOGGING This bulletin has been amended to add Fog Lamps and modify one step in the flow chart on page 3. No other changes have been made. Please discard previous versions of this bulletin.
Associated Products (169)2019 Nissan 370Z2019 Nissan Altima2019 Nissan Armada2019 Nissan Frontier2019 Nissan GT-R2019 Nissan Kicks2019 Nissan Leaf2019 Nissan Maxima2019 Nissan Murano2019 Nissan NV2019 Nissan NV2002019 Nissan Pathfinder2019 Nissan Rogue2019 Nissan Rogue Sport2019 Nissan Sentra2019 Nissan Titan2019 Nissan Versa2019 Nissan Versa Note2018 Nissan 370Z2018 Nissan Altima+ 149 moreAssociated Documents - April 9, 2018•Document ID: 10138223Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING; EQUIPMENT; ELECTRICAL SYSTEM
- Mfr Comm. #:
- NTB16-018c
- Date Added:
- May 21, 2018
- Manufacturer:
- NISSAN
SummaryMIL ON WITH P0603 STORED FOR ECM BACK UP CIRCUIT This bulletin does NOT apply to Titan equipped with Cummins V8 Diesel engine. This bulletin has been amended to add a NOTE in the Applied Vehicles. No other changes have been made. Please discard previous versions of this bulletin.
Associated Products (95)2019 Nissan 370Z2019 Nissan Altima2019 Nissan Armada2019 Nissan Frontier2019 Nissan GT-R2019 Nissan Kicks2019 Nissan Leaf2019 Nissan Maxima2019 Nissan Murano2019 Nissan NV2019 Nissan NV2002019 Nissan Pathfinder2019 Nissan Rogue2019 Nissan Rogue Sport2019 Nissan Sentra2019 Nissan Titan2019 Nissan Versa2019 Nissan Versa Note2018 Nissan 370Z2018 Nissan Altima+ 75 moreAssociated Documents