Mazda RX-8 Service Bulletins (2005)

180 manufacturer communications on file.

January 13, 2020•Document ID: 10170817
Service Bulletin/Repair Instructions
EQUIPMENT
Mfr Comm. #:
09-006-20-3673
Date Added:
January 30, 2020
Manufacturer:
MAZDA
Summary
When encountering a vehicle with paint damage, refer to the "Mazda Pocket Paint Guide" to determine cause, prevention, remedy, and warranty coverage (if applicable). Copies of the Mazda Pocket Paint Guide are available for order on Mazda e-Store (part number: 9999-95-MPPG-12).
Associated Products (144)
2020 Mazda CX-3 2020 Mazda CX-30 2020 Mazda CX-5 2020 Mazda CX-9 2020 Mazda Mazda3 2020 Mazda Mazda6 2020 Mazda MX-5 2019 Mazda CX-3 2019 Mazda CX-5 2019 Mazda CX-9 2019 Mazda Mazda3 2019 Mazda Mazda6 2019 Mazda MX-5 2018 Mazda CX-3 2018 Mazda CX-5 2018 Mazda CX-9 2018 Mazda Mazda3 2018 Mazda Mazda6 2018 Mazda MX-5 2017 Mazda CX-3+ 124 more
Associated Documents
- Download MC-10170817-0001.pdf↗
January 9, 2020•Document ID: 10170661
Service Bulletin/Repair Instructions
ELECTRICAL SYSTEM; EQUIPMENT
Mfr Comm. #:
09-003-20-3671
Date Added:
January 23, 2020
Manufacturer:
MAZDA
Summary
In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealerÃ¢ÂÂs responsibility to comply with Federal, State, and local laws concerning odometer and related documentation requirements when providing a repair or replacement. Ã¯ÂÂ· Mazda vehicles are manufactured with tamper-proof speedometers. Ã¯ÂÂ· When a speedometer is replaced, the new speedometer will read zero (0) miles. Ã¯ÂÂ· This procedure is extremely important to accurately represent actual vehicle mileage. Ã¯ÂÂ· Prior to speedometer removal, complete the information required on the Ã¢ÂÂSpeedometer Replacement LabelÃ¢ÂÂ. Labels can only be ordered through Mazda eStore. Ã¯ÂÂ· In an effort to achieve a higher level of Customer Experience and retain the value of MazdaÃ¢ÂÂs vehicles, MNAO Warranty Operations is allowing all Mazda dealers to utilize a third party, SPECMO Enterprises, Inc., for Instrument Panel Cluster (IPC) odometer setting service. With the use of SPECMOÃ¢ÂÂs services, it is possible that the odometer will be set between 10 to 31 miles over the odometer mileage at the time of replacement for both warranty and customer pay repairs. Please make sure that the customer is aware that there may be a slight variance to the odometer, in which case the customer may have to accept the slightly higher mileage. Since odometer setting service is not part of the warranty repair, it is not warrantable nor required, but optional. However, Mazda Warranty policy provides after- warranty assistance (AWA) or DSA that can be utilized to cover this service expense.
Associated Products (197)
2020 Mazda CX-3 2020 Mazda CX-30 2020 Mazda CX-5 2020 Mazda CX-9 2020 Mazda Mazda3 2020 Mazda Mazda6 2020 Mazda MX-5 2019 Mazda CX-3 2019 Mazda CX-5 2019 Mazda CX-9 2019 Mazda Mazda2 2019 Mazda Mazda3 2019 Mazda Mazda6 2019 Mazda MX-5 2018 Mazda CX-3 2018 Mazda CX-5 2018 Mazda CX-9 2018 Mazda Mazda2 2018 Mazda Mazda3 2018 Mazda Mazda5+ 177 more
Associated Documents
- Download MC-10170661-0001.pdf↗
January 9, 2020•Document ID: 10170656
Service Bulletin/Repair Instructions
SUSPENSION; EQUIPMENT; EQUIPMENT ADAPTIVE/MOBILITY
Mfr Comm. #:
02-002-20-3651
Date Added:
January 23, 2020
Manufacturer:
MAZDA
Summary
Some customers may complain of signs of oil on the struts or shock absorbers. In most cases the oil that is present is normal, and a result of the oil that remains on the shaft during the normal sweeping process of the shaft seal. Follow the inspection guidelines below to determine if the condition is a result of the normal sweeping process or a failure of the shaft seal.
Associated Products (143)
2020 Mazda CX-3 2020 Mazda CX-5 2020 Mazda CX-9 2020 Mazda Mazda3 2020 Mazda Mazda6 2020 Mazda MX-5 2019 Mazda CX-3 2019 Mazda CX-5 2019 Mazda CX-9 2019 Mazda Mazda3 2019 Mazda Mazda6 2019 Mazda MX-5 2018 Mazda CX-3 2018 Mazda CX-5 2018 Mazda CX-9 2018 Mazda Mazda3 2018 Mazda Mazda6 2018 Mazda MX-5 2017 Mazda CX-3 2017 Mazda CX-5+ 123 more
Associated Documents
- Download MC-10170656-0001.pdf↗
January 8, 2020•Document ID: 10170657
Service Bulletin/Repair Instructions
SERVICE BRAKES, HYDRAULIC
Mfr Comm. #:
04-001-20-3672
Date Added:
January 23, 2020
Manufacturer:
MAZDA
Summary
Some vehicles exhibit brake related concerns such as brake noise, brake judder or brake dragging. If you encounter a customer complaint for any one of these symptoms, refer to the following information to understand why symptoms may occur, and to better assist the customer in resolving their specific brake concern.
Associated Products (67)
2015 Mazda CX-9 2015 Mazda Mazda2 2015 Mazda Mazda5 2015 Mazda MX-5 2014 Mazda CX-9 2014 Mazda Mazda2 2014 Mazda Mazda5 2014 Mazda MX-5 2013 Mazda CX-9 2013 Mazda Mazda2 2013 Mazda Mazda5 2013 Mazda Mazda6 2013 Mazda MX-5 2012 Mazda CX-9 2012 Mazda Mazda2 2012 Mazda Mazda3 2012 Mazda Mazda5 2012 Mazda Mazda6 2012 Mazda MX-5 2011 Mazda CX-7+ 47 more
Associated Documents
- Download MC-10170657-0001.pdf↗
December 19, 2019•Document ID: 10169540
Service Bulletin/Repair Instructions
EQUIPMENT; ENGINE AND ENGINE COOLING
Mfr Comm. #:
MT-002-19
Date Added:
December 20, 2019
Manufacturer:
MAZDA
Summary
If an engine assembly is replaced after a catastrophic internal mechanical failure, clean the intake manifold internally before installing a replacement engine assembly. If the intake manifold is not cleaned properly, the replacement engine may fail prematurely. Metallic debris from the old engine (with catastrophic internal mechanical failure) may rest inside the intake manifold. When the new engine assembly is installed, debris in the intake manifold will be ingested into the new engine and cause internal damage.
Associated Products (110)
2020 Mazda CX-3 2020 Mazda CX-30 2020 Mazda CX-5 2020 Mazda CX-9 2020 Mazda Mazda3 2020 Mazda Mazda6 2020 Mazda MX-5 2019 Mazda CX-3 2019 Mazda CX-5 2019 Mazda CX-9 2019 Mazda Mazda2 2019 Mazda Mazda3 2019 Mazda Mazda6 2019 Mazda MX-5 2018 Mazda CX-3 2018 Mazda CX-5 2018 Mazda CX-9 2018 Mazda Mazda2 2018 Mazda Mazda3 2018 Mazda Mazda6+ 90 more
Associated Documents
- Download MC-10169540-0001.pdf↗
September 30, 2019•Document ID: 10165676
Service Bulletin/Repair Instructions
ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:MANIFOLD/HEADER/MUFFLER/TAIL PIPE; ENGINE AND ENGINE COOLING
Mfr Comm. #:
MT-002-19
Date Added:
October 4, 2019
Manufacturer:
MAZDA
Summary
If an engine assembly is replaced after a catastrophic internal mechanical failure, clean the intake manifold internally before installing a replacement engine assembly. If the intake manifold is not cleaned properly, the replacement engine may fail prematurely. Metallic debris from the old engine (with catastrophic internal mechanical failure) may rest inside the intake manifold. When the new engine assembly is installed, debris in the intake manifold will be ingested into the new engine and cause internal damage.
Associated Products (106)
2020 Mazda Mazda3 2019 Mazda CX-3 2019 Mazda CX-5 2019 Mazda CX-9 2019 Mazda Mazda2 2019 Mazda Mazda3 2019 Mazda Mazda6 2019 Mazda MX-5 2018 Mazda CX-3 2018 Mazda CX-5 2018 Mazda CX-9 2018 Mazda Mazda2 2018 Mazda Mazda3 2018 Mazda Mazda6 2018 Mazda MX-5 2017 Mazda CX-3 2017 Mazda CX-5 2017 Mazda CX-9 2017 Mazda Mazda2 2017 Mazda Mazda3+ 86 more
Associated Documents
- Download MC-10165676-0001.pdf↗
April 1, 2019•Document ID: 10159201
Service Bulletin/Repair Instructions
EQUIPMENT
Mfr Comm. #:
SA-013-19
Date Added:
April 25, 2019
Manufacturer:
MAZDA
Summary
MAZDA IDS INOPERATIVE WITH VCM-II LICENSE EXPIRATION MESSAGE - If you encounter an IDS inoperative problem with VCM-II license expiration message, follow the instructions below: 1. CLICK HERE to download the resetting tool to your PC desktop. 2. Reboot your PC, DO NOT start any application after restarting. 3. Run the resetting tool by double clicking the "Reset.bat" file (on your desktop from step 1). 4. Press any key after reading the notifications about the resetting tool.
Associated Products (107)
2019 Mazda CX-3 2019 Mazda CX-5 2019 Mazda CX-9 2019 Mazda Mazda3 2019 Mazda Mazda6 2019 Mazda MX-5 2018 Mazda CX-3 2018 Mazda CX-5 2018 Mazda CX-9 2018 Mazda Mazda3 2018 Mazda Mazda6 2018 Mazda MX-5 2017 Mazda CX-3 2017 Mazda CX-5 2017 Mazda CX-9 2017 Mazda Mazda3 2017 Mazda Mazda6 2017 Mazda MX-5 2016 Mazda CX-3 2016 Mazda CX-5+ 87 more
Associated Documents
- Download MC-10159201-0001.pdf↗
March 20, 2019•Document ID: 10154879
Service Bulletin/Repair Instructions
ENGINE AND ENGINE COOLING; FUEL SYSTEM, DIESEL:STORAGE:TANK ASSEMBLY; FUEL SYSTEM, GASOLINE; EQUIPMENT
Mfr Comm. #:
00-003-19-3583
Date Added:
March 21, 2019
Manufacturer:
MAZDA
Summary
In support of the new MRT distribution, Mazda will ship to dealers a new Dual Purpose Diagnostic Leak Detector beginning March, 2019. Training videos will be posted to MGSS shortly and Workshop Manual procedures will be revised gradually.
Associated Products (160)
2019 Mazda CX-3 2019 Mazda CX-5 2019 Mazda CX-9 2019 Mazda Mazda3 2019 Mazda Mazda6 2019 Mazda MX-5 2018 Mazda CX-3 2018 Mazda CX-5 2018 Mazda CX-9 2018 Mazda Mazda3 2018 Mazda Mazda6 2018 Mazda MX-5 2017 Mazda CX-3 2017 Mazda CX-5 2017 Mazda CX-9 2017 Mazda Mazda3 2017 Mazda Mazda6 2017 Mazda MX-5 2016 Mazda CX-3 2016 Mazda CX-5+ 140 more
Associated Documents
- Download MC-10154879-0001.pdf↗
March 15, 2019•Document ID: 10154529
Service Bulletin/Repair Instructions
EXTERIOR LIGHTING:HEADLIGHTS; EXTERIOR LIGHTING:TAIL LIGHTS; EXTERIOR LIGHTING
Mfr Comm. #:
09-003-19-3555a
Date Added:
March 20, 2019
Manufacturer:
MAZDA
Summary
Some customers may complain of condensation/fog inside the front (headlamp/headlight) or rear (taillamp/taillight) combination lights. The recent new models have been fitted with a clear lens which can cause the symptom to be more noticeable, however, it does not affect the performance of the light. This condensation/fog is a natural phenomenon that occurs when there is a fairly large temperature difference between the inside and the outside of the light housing. It is normal for very small water drops to appear in certain locations on the light units where the air is stagnant (condensation), making the lens look whitish (fog). This happens mostly in the corners and narrow spaces, and will typically clear during warmer ambient temperatures, or when the lights have been on for some time.
Associated Products (96)
2019 Mazda CX-3 2019 Mazda CX-5 2019 Mazda CX-9 2019 Mazda Mazda3 2019 Mazda Mazda6 2019 Mazda MX-5 2018 Mazda CX-3 2018 Mazda CX-5 2018 Mazda CX-9 2018 Mazda Mazda3 2018 Mazda Mazda6 2018 Mazda MX-5 2017 Mazda CX-3 2017 Mazda CX-5 2017 Mazda CX-9 2017 Mazda Mazda3 2017 Mazda Mazda6 2017 Mazda MX-5 2016 Mazda CX-3 2016 Mazda CX-5+ 76 more
Associated Documents
- Download MC-10154529-0001.pdf↗
January 23, 2019•Document ID: 10153318
Service Bulletin/Repair Instructions
STEERING
Mfr Comm. #:
02-004-19-3574
Date Added:
February 19, 2019
Manufacturer:
MAZDA
Summary
Some customers may complain that the steering wheel is off center more than 3° even when driving straight on a flat road.
Associated Products (106)
2019 Mazda CX-3 2019 Mazda CX-5 2019 Mazda CX-9 2019 Mazda Mazda3 2019 Mazda Mazda6 2019 Mazda MX-5 2018 Mazda CX-3 2018 Mazda CX-5 2018 Mazda CX-9 2018 Mazda Mazda3 2018 Mazda Mazda6 2018 Mazda MX-5 2017 Mazda CX-3 2017 Mazda CX-5 2017 Mazda CX-9 2017 Mazda Mazda3 2017 Mazda Mazda6 2017 Mazda MX-5 2016 Mazda CX-3 2016 Mazda CX-5+ 86 more
Associated Documents
- Download MC-10153318-0001.pdf↗
January 14, 2019•Document ID: 10153339
Service Bulletin/Repair Instructions
ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL
Mfr Comm. #:
09-009-19-3566
Date Added:
February 19, 2019
Manufacturer:
MAZDA
Summary
In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer's responsibility to comply with Federal, State, and local laws concerning odometer and related documentation requirements when providing a repair or replacement. Mazda vehicles are manufactured with tamper-proof speedometers. When a speedometer is replaced, the new speedometer will read zero (0) miles. This procedure is extremely important to accurately represent actual vehicle mileage. Prior to speedometer removal, complete the information required on the "Speedometer Replacement Label". Labels can only be ordered through Mazda eStore. In an effort to achieve a higher level of Customer Experience and retain the value of Mazda's vehicles, MNAO Warranty Operations is allowing all Mazda dealers to utilize a third party, SPECMO Enterprises, Inc., for Instrument Panel Cluster (IPC) odometer setting service. With the use of SPECMO's services, it is possible that the odometer will be set between 10 to 31 miles over the odometer mileage at the time of replacement for both warranty and customer pay repairs. Please make sure that the customer is aware that there may be a slight variance to the odometer, in which case the customer may have to accept the slightly higher mileage. Since odometer setting service is not part of the warranty repair, it is not warrantable nor required, but optional. However, Mazda Warranty policy provides after-warranty assistance (AWA) or DSA that can be utilized to cover this service expense.
Associated Products (168)
2019 Mazda CX-3 2019 Mazda CX-5 2019 Mazda CX-9 2019 Mazda Mazda3 2019 Mazda Mazda6 2019 Mazda MX-5 2018 Mazda CX-3 2018 Mazda CX-5 2018 Mazda CX-9 2018 Mazda Mazda3 2018 Mazda Mazda6 2018 Mazda MX-5 2017 Mazda CX-3 2017 Mazda CX-5 2017 Mazda CX-9 2017 Mazda Mazda3 2017 Mazda Mazda6 2017 Mazda MX-5 2016 Mazda CX-3 2016 Mazda CX-5+ 148 more
Associated Documents
- Download MC-10153339-0001.pdf↗
January 14, 2019•Document ID: 10153334
Service Bulletin/Repair Instructions
EQUIPMENT
Mfr Comm. #:
09-005-19-3562
Date Added:
February 19, 2019
Manufacturer:
MAZDA
Summary
When encountering a vehicle with paint damage, refer to the "Mazda Pocket Paint Guide" to determine cause, prevention, remedy, and warranty coverage (if applicable). Copies of the Mazda Pocket Paint Guide are available for order on Mazda e-Store (part number: 9999-95-MPPG-12).
Associated Products (133)
2019 Mazda CX-3 2019 Mazda CX-5 2019 Mazda CX-9 2019 Mazda Mazda3 2019 Mazda Mazda6 2019 Mazda MX-5 2018 Mazda CX-3 2018 Mazda CX-5 2018 Mazda CX-9 2018 Mazda Mazda3 2018 Mazda Mazda6 2018 Mazda MX-5 2017 Mazda CX-3 2017 Mazda CX-5 2017 Mazda CX-9 2017 Mazda Mazda3 2017 Mazda Mazda6 2017 Mazda MX-5 2016 Mazda CX-3 2016 Mazda CX-5+ 113 more
Associated Documents
- Download MC-10153334-0001.pdf↗
January 14, 2019•Document ID: 10153307
Service Bulletin/Repair Instructions
SERVICE BRAKES
Mfr Comm. #:
00-002-19-3561
Date Added:
February 19, 2019
Manufacturer:
MAZDA
Summary
Mazda North American Operations has approved an additional on-car brake lathe as an option for MNAO authorized equipment. The Pro-Cut On-Car Brake Lathe has been added to the MNAO authorized equipment program. NOTE: Accu-turn is still an approved brake lathe, but it is no longer available for purchase from our vendor. IMPORTANT: Rotors must be machined using a Mazda approved on-car brake lathe, or warranty claims are subject to denial or debit. Tool Number Description Pricing PC1923MAZ Pro-Cut On-Car Brake Lathe Check eStore or call for current pricing OBTAINING TOOLS This tool can be ordered through Mazda eStore. You can log on to eStore at: http://dealers.mazdausa.com CUSTOMER SERVICE INFORMATION For warranty or product information contact Mazda Authorized Service Equipment at 877-768-6657. Customer service representatives are available from 7:30 AM until 7:00 PM CST, Monday through Friday. SPECIAL SERVICE TOOL (SST) PART NAME: OVERVIEW Pro-Cut On-Car Brake Lathe PART NUMBER: PC1923MAZ APPLICABLE MODELS: All USAGE: To machine brake rotors on the vehicle.
Associated Products (131)
2019 Mazda CX-3 2019 Mazda CX-5 2019 Mazda CX-9 2019 Mazda Mazda3 2019 Mazda Mazda6 2019 Mazda MX-5 2018 Mazda CX-3 2018 Mazda CX-5 2018 Mazda CX-9 2018 Mazda Mazda3 2018 Mazda Mazda6 2018 Mazda MX-5 2017 Mazda CX-3 2017 Mazda CX-5 2017 Mazda CX-9 2017 Mazda Mazda3 2017 Mazda Mazda6 2017 Mazda MX-5 2016 Mazda CX-3 2016 Mazda CX-5+ 111 more
Associated Documents
- Download MC-10153307-0001.pdf↗
January 14, 2019•Document ID: 10153306
Service Bulletin/Repair Instructions
EQUIPMENT
Mfr Comm. #:
00-001-19-3560
Date Added:
February 19, 2019
Manufacturer:
MAZDA
Summary
Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle- specific workshop manual or owner's manual. Services performed outside of Mazda's factory scheduled maintenance are not recommended. These services are unnecessary and create unneeded expenses for your customers.
Associated Products (130)
2019 Mazda CX-3 2019 Mazda CX-5 2019 Mazda CX-9 2019 Mazda Mazda3 2019 Mazda Mazda6 2019 Mazda MX-5 2018 Mazda CX-3 2018 Mazda CX-5 2018 Mazda CX-9 2018 Mazda Mazda3 2018 Mazda Mazda6 2018 Mazda MX-5 2017 Mazda CX-3 2017 Mazda CX-5 2017 Mazda CX-9 2017 Mazda Mazda3 2017 Mazda Mazda6 2017 Mazda MX-5 2016 Mazda CX-3 2016 Mazda CX-5+ 110 more
Associated Documents
- Download MC-10153306-0001.pdf↗
January 10, 2019•Document ID: 10153333
Service Bulletin/Repair Instructions
EQUIPMENT
Mfr Comm. #:
09-004-19-3543
Date Added:
February 19, 2019
Manufacturer:
MAZDA
Summary
Mazda infotainment systems require contacting the proper source for diagnostic support, parts authorization, and parts exchange. Some components require prior authorization before ordering as exchange. Refer to DAG Exchange Central (MXConnect>Parts and Accessories>Parts>Programs>Exchange Central) for component availability, source of technical support and prior authorization requirement. NOTE: Always check for a TSB that may modify or eliminate prior authorization for a specific symptom for a given component.
Associated Products (107)
2019 Mazda CX-3 2019 Mazda CX-5 2019 Mazda CX-9 2019 Mazda Mazda3 2019 Mazda Mazda6 2019 Mazda MX-5 2018 Mazda CX-3 2018 Mazda CX-5 2018 Mazda CX-9 2018 Mazda Mazda3 2018 Mazda Mazda6 2018 Mazda MX-5 2017 Mazda CX-3 2017 Mazda CX-5 2017 Mazda CX-9 2017 Mazda Mazda3 2017 Mazda Mazda6 2017 Mazda MX-5 2016 Mazda CX-3 2016 Mazda CX-5+ 87 more
Associated Documents
- Download MC-10153333-0001.pdf↗
January 10, 2019•Document ID: 10153316
Service Bulletin/Repair Instructions
WHEELS
Mfr Comm. #:
02-002-19-3546
Date Added:
February 19, 2019
Manufacturer:
MAZDA
Summary
Some automotive cleaning products contain strong acid or alkali. When these types of cleaners are used to clean the wheels on Mazda vehicles, the chemicals contents penetrate the clear coating of the wheel surface and damage the paint under the clear coating. The damaged area has the appearance of dark stains.
Associated Products (101)
2019 Mazda CX-3 2019 Mazda CX-5 2019 Mazda CX-9 2019 Mazda Mazda3 2019 Mazda Mazda6 2019 Mazda MX-5 2018 Mazda CX-3 2018 Mazda CX-5 2018 Mazda CX-9 2018 Mazda Mazda3 2018 Mazda Mazda6 2018 Mazda MX-5 2017 Mazda CX-3 2017 Mazda CX-5 2017 Mazda CX-9 2017 Mazda Mazda3 2017 Mazda Mazda6 2017 Mazda MX-5 2016 Mazda CX-3 2016 Mazda CX-5+ 81 more
Associated Documents
- Download MC-10153316-0001.pdf↗
January 10, 2019•Document ID: 10153227
Service Bulletin/Repair Instructions
SERVICE BRAKES
Mfr Comm. #:
04-002-19-3545
Date Added:
February 19, 2019
Manufacturer:
MAZDA
Summary
Some vehicles exhibit brake related concerns such as brake noise, brake judder or brake dragging. If you encounter a customer complaint for any one of these symptoms, refer to the following information to understand why symptoms may occur, and to better assist the customer in resolving their specific brake concern.
Associated Products (102)
2019 Mazda CX-3 2019 Mazda CX-5 2019 Mazda CX-9 2019 Mazda Mazda3 2019 Mazda Mazda6 2019 Mazda MX-5 2018 Mazda CX-3 2018 Mazda CX-5 2018 Mazda CX-9 2018 Mazda Mazda3 2018 Mazda Mazda6 2018 Mazda MX-5 2017 Mazda CX-3 2017 Mazda CX-5 2017 Mazda CX-9 2017 Mazda Mazda3 2017 Mazda Mazda6 2017 Mazda MX-5 2016 Mazda CX-3 2016 Mazda CX-5+ 82 more
Associated Documents
- Download MC-10153227-0001.pdf↗
January 9, 2019•Document ID: 10153311
Service Bulletin/Repair Instructions
ENGINE AND ENGINE COOLING
Mfr Comm. #:
01-004-19-3558
Date Added:
February 19, 2019
Manufacturer:
MAZDA
Summary
On some vehicles, a sulfur smell or 'rotten egg' odor may be noticed coming from the exhaust system. The odor is usually noticed after a cold start, fast idle, extended periods of idling and full throttle acceleration. Sulfur smell is not an indication of an engine concern and will not cause reduced driveability or durability of the engine or any of its emission components. The sulfur smell or 'rotten egg' odor is caused by high amounts of sulfur in the gasoline being used in the vehicle. Sulfur is normally eliminated during the refining process, but the EPA regulation of sulfur in gasoline differs from state to state. Vehicles using fuel containing high amounts of sulfur will most likely emit sulfur smell from the exhaust system.When high sulfur fuel is burned, there is a chemical reaction in the catalytic converter causing the sulfur tooxidize. As the vehicle is driven, the oxidizing reaction odor in the converter will decrease with mileage and age.
Associated Products (143)
2019 Mazda CX-3 2019 Mazda CX-5 2019 Mazda CX-9 2019 Mazda Mazda3 2019 Mazda MX-5 2018 Mazda CX-3 2018 Mazda CX-5 2018 Mazda CX-9 2018 Mazda Mazda3 2018 Mazda Mazda6 2018 Mazda MX-5 2017 Mazda CX-3 2017 Mazda CX-5 2017 Mazda CX-9 2017 Mazda Mazda3 2017 Mazda Mazda6 2017 Mazda MX-5 2016 Mazda CX-3 2016 Mazda CX-5 2016 Mazda CX-9+ 123 more
Associated Documents
- Download MC-10153311-0001.pdf↗
January 3, 2019•Document ID: 10153332
Service Bulletin/Repair Instructions
EXTERIOR LIGHTING
Mfr Comm. #:
09-003-19-3555
Date Added:
February 19, 2019
Manufacturer:
MAZDA
Summary
Some customers may complain of condensation/fog inside the front (headlamp/headlight) or rear (taillamp/taillight) combination lights. The recent new models have been fitted with a clear lens which can cause the symptom to be more noticeable, however, it does not affect the performance of the light. This condensation/fog is a natural phenomenon that occurs when there is a fairly large temperature difference between the inside and the outside of the light housing. It is normal for very small water drops to appear in certain locations on the light units where the air is stagnant (condensation), making the lens look whitish (fog). This happens mostly in the corners and narrow spaces, and will typically clear during warmer ambient temperatures, or when the lights have been on for some time.
Associated Products (98)
2019 Mazda CX-3 2019 Mazda CX-5 2019 Mazda CX-9 2019 Mazda Mazda3 2019 Mazda MX-5 2018 Mazda CX-3 2018 Mazda CX-5 2018 Mazda CX-9 2018 Mazda Mazda3 2018 Mazda Mazda6 2018 Mazda MX-5 2017 Mazda CX-3 2017 Mazda CX-5 2017 Mazda CX-9 2017 Mazda Mazda3 2017 Mazda Mazda6 2017 Mazda MX-5 2016 Mazda CX-3 2016 Mazda CX-5 2016 Mazda CX-9+ 78 more
Associated Documents
- Download MC-10153332-0001.pdf↗
January 3, 2019•Document ID: 10153331
Service Bulletin/Repair Instructions
EQUIPMENT ADAPTIVE/MOBILITY
Mfr Comm. #:
09-002-19-3554
Date Added:
February 19, 2019
Manufacturer:
MAZDA
Summary
This service bulletin provides information regarding the proper use of the driver's floor mat to avoid anypotential interference with the foot pedals. The following are possible causes of floor mat interference,which can be avoided with proper usage. Floor mat moves forward due to improper installation. Inappropriate floor mat (such as aftermarket, non-factory-equipped, or non-genuine) is used. Floor mat is stacked one on top of another.
Associated Products (144)
2019 Mazda CX-3 2019 Mazda CX-5 2019 Mazda CX-9 2019 Mazda Mazda3 2019 Mazda Mazda6 2019 Mazda MX-5 2018 Mazda CX-3 2018 Mazda CX-5 2018 Mazda CX-9 2018 Mazda Mazda3 2018 Mazda Mazda6 2018 Mazda MX-5 2017 Mazda CX-3 2017 Mazda CX-5 2017 Mazda CX-9 2017 Mazda Mazda3 2017 Mazda Mazda6 2017 Mazda MX-5 2016 Mazda CX-3 2016 Mazda CX-5+ 124 more
Associated Documents
- Download MC-10153331-0001.pdf↗

← Back to Mazda RX-8